SSimder 5 in 1 MIG Welder, 140A Pulse Spot Dual Voltage Portable

Since 2017, SSIMDER has specialized in the production, development, and sales of welding machines, helmets, and accessories. We’re committed to providing reliable, beginner-friendly tools for both home and professional use. Want to find the right tools for your next project? Click the images on the right to explore our products! Five processes in one 7.76 lbs inverter: Flux Core MIG, Lift TIG, Stick, plus Pulse and Spot. 116A on 110V, 140A on 220V through the included cord. Synergic control sets wire speed from the wire diameter. SPOT tacks from 0.1 to 5 seconds. Up to 1/8 in steel on 220V. Runs on a household outlet Pulse cools the puddle between cycles: less burn-through on thin sheet, less spatter No cylinder, no wind problems. Flux core holds outdoors, 0.030 or 0.035 in wire, 1 to 2 lbs spool Lift TIG for stainless tube and thin sheet, 15 to 140A on 220V. WP17V torch sold separately Stick 20 to 140A with ARC FORCE: holds the arc through rust and mill scale on gates and trailers Set 0.1 to 5 seconds for the same tack every pull, so panel work stops depending on reaction Box: welder, 14AK MIG torch, electrode holder, ground clamp, 1 lb 0.030 in flux core wire, three torch accessories, 110V to 220V cord, manual. WP17V TIG torch sold separately Timed spot tacks on quarter panels, Pulse on thin sheet to keep heat and warping down, Flux core outdoors in wind: fence posts, gate frames, trailer patches. Stick with ARC FORCE on rusty plate, Lift TIG on stainless tube, 110V input from a household outlet in the truck or the field 5 in 1 Pulse Flux Welder 6 in 1 Welder Cutter 10 in 1 Welder Cutter 6 in 1 AC DC TIG Welder 7PCS Welding Kit 25Pcs MIG Consumables 20Pcs MIG Consumables Can this welder handle thin sheet metal without burning through? Yes - 0.8 mm flux core on low current plus SPOT mode for panel work. SPOT delivers a timed burst instead of a continuous bead, which is what stops thin sheet from warping or burning through Does this machine have a spot weld timer? What does SPOT mode do? SPOT has an adjustable timer from 0.1 to 5 seconds in MIG mode: set the time, press, and the machine fires a fixed burst - the same job a dedicated spot welder does on auto body panels Can I use this on a regular 110V household outlet or do I need 220V? Both - it runs on 110V out of the box for sheet metal and light repair, and the included conversion cord takes it to 220V for full 140A output on thicker stock Is this machine good for complete beginners? Yes - synergic control sets wire speed and current for the wire diameter you load, the digital display shows the settings, and flux core needs no gas setup, so the first weld happens the same day What is included in the box? Do I need to buy anything extra to start welding? The 14AK MIG torch, a 1 lb spool of flux core wire, electrode holder with cable, ground clamp, 220V conversion cord and manual. Nothing else is needed for flux core or stick; a WP17V torch is separate for TIG