Search  for anything...
Shop Fox

Shop Fox W1685-1-1/2 HP Dust Collector & POWERTEC 70108 4 Inch Blast Gate for Dust Collector/Vacuum Fittings

  • Based on 838 reviews
Condition: New
Checking for product changes
$557.99 Why this price?
Save $42.00 was $599.99

Buy Now, Pay Later

As low as / mo
  • – Up to 36-month term if approved
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

Returnable until Jan 31, 2025

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Saturday, Jun 14
Order within 11 hours and 32 minutes
Available payment plans shown during checkout

Style: 1.5 HP, 1,280 CFM


Pattern Name: Dust Collector + Blast Gate


Features

  • Product 1: Powder coated paint
  • Product 1: Bag volume: 5.4 cubic feet
  • Product 1: Static pressure: 10.1-Inch. Interior Hose Diameter (In.) - 6
  • Product 1: Air suction capacity: Approximately 1,280 CFM
  • Product 2: Includes: 4 Blast Gate; Both ends have 4 OD outlet diameters and are designed to work with 4 ID dust hoses or other 4 ID ports
  • Product 2: Specifications: Accepts 4 ID dust hose, port or vacuum fitting; 4" Nominal end measures 3-61/64 O.D. and 3-3/4 I.D
  • Product 2: Compatibility: Will not connect directly to other 4 OD ports; please confirm that the actual listed size fits your application before ordering. If connecting to a 4 OD port, a Flex Cuff or similar device will be required
  • Product 2: Function: Maximizes the efficiency of your dust collection system by directing and regulating the air flow from one machine to another

Description

SHOP FOX W1685 1.5-Horsepower 1,280 CFM Dust Collector , White A powerful dust collector from Shop Fox. This unit features an extra heavy-duty 12" steel impeller and a 1-1/2 HP motor that runs on 110V. For wood dust only. Features 2.5 micron filtration. POWERTEC 70108 4 Inch Blast Gate for Dust Collector/Vacuum Fittings This manual blast gate helps maximize your dust collection system by regulating proper air flow to your designated machine of choice. Acting as an in-line gate to control the vacuum flow to specified areas of your work shop, it’s designed to work seamlessly with a variety of flexible hoses, ducts, and 4-inch ports for an assortment of popular brands. Compatibility - Both ends have 4” OD outlet diameters and are designed to work with 4” ID dust hoses or other 4” ID ports. Will not connect directly to other 4” OD ports, please confirm that the actual listed size fits your application before ordering. If connecting to a 4” OD port, a POWERTEC 70149 Flex Cuff or similar device will be required. Premium Construction - The blast gate features ABS plastic, along with a thick abrasion resistant profile that’s perfectly suited to take on the abusive nature of sawdust, woodchips and other debris. We’ve manufactured this dust collector accessory with a functional design that you can depend on, and with a quality build that speaks for itself. Universal Fit - Featuring a nominal 4 inch OD diameter, this unit will provide a perfect fit for most professional and at-home workshop dust collection systems. Whether you’re a beginner or seasoned woodworker, it’s extremely easy to use and install. The POWERTEC 4-Inch blast gate maximizes efficiency by controlling air flow from one machine to another.

Brand: Shop Fox


Special Feature: Bag


Filter Type: HEPA Filter


Included Components: Nozzle


Is Cordless?: No


Brand: ‎Shop Fox


Special Feature: ‎Bag


Filter Type: ‎HEPA Filter


Included Components: ‎Nozzle


Is Cordless?: ‎No


Capacity: ‎5.4 Cubic Feet


Maximum Suction: ‎1.28E+3 Feet


Recommended Uses For Product: ‎Hard Floor


Form Factor: ‎Cannister, Handheld


Color: ‎White


Model Name: ‎Shop Fox W1685


Noise Level: ‎60 dB


Amperage: ‎10 Amps


Manufacturer: ‎Shop Fox


Number of Items: ‎2


Motor Horsepower: ‎1.5


Control Method: ‎Touch


Style: ‎1.5 HP, 1,280 CFM


Portable: ‎No


Number of Power Levels: ‎2


Indoor/Outdoor Usage: ‎Indoor


Finish Type: ‎Powder Coated


Item model number: ‎W1685


Finish: ‎Powder Coated


Pattern: ‎Dust Collector + Blast Gate


Item Package Quantity: ‎1


Special Features: ‎Bag


Date First Available: February 23, 2022


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Saturday, Jun 14

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Great machine. A bit lacking in quality control.
Style: 1.5 HP, 1,280 CFM Pattern Name: Dust Collector
I got my Shop Fox today. I started assembly. THe first thing I noticed was I was short on bolts per the manual. The manual called for 14 M8 bolts and it only came with 6. These are for bolting down the motor mount and impeller housing. Don't panic, the base plate has threaded holes in it so they must have changed the design but not updated the manual yet. The motor mount holes in the base plate lined up nicely by the impeller housing holes were 1 3/8" too close to the motor mount holes. One othe impeller mounts lined up with a caster bolt so I replaced that with a 1/4" x 1" bolt, 2 flat washers, a lock washer and nut. I had to drill a hole for the other impleller housing foot. I used another 1/4 x 1" bolt and washers to secure it. There are zero lock washers with this unti, just flat washers. Check the unit perodically to ensure all bolts are tight. If they tend to come lose add a lock washer. A hex wrench and 2 cast open ended wrenches (8 & 10MM and 111 & 13MM) came with the unit. A nice touch but you don't use the hex wrench and at some point you will need a second 10 and 13MM wrench to tighten the bolts. ou will also need a phillips screwdriver. Assembly was a breeze once I got past the missing impeller housing holes. The unit runs fairly quiet and it's certainly easier on the erars than my shop vac. Suction is good. The colloector was able to pull planer shavings from my open hand at 4" from the duct. I will rate the collection performance after I've had a bit more time to use the machine with all my tools. Based on advice from reviews on the Woodstock W1049 large dust collector seperator I will install one as a precollector to the Shop Fox. As one reviewer mentioned it reduces the pucker factor should a large chunk of wood get sucked into the dust collection. I have no desire to be replacing my impeller or housing any time soon. :) Reviewers note that the precollector catches most of the shavings and reduces the frequency of emptying the Shop Fox bag. The unit is on casters for ease of movement but be wary of where you grab the unit to move it. I pulled on the bag support arm and it began to bend. It seems like the seperator unit is the best place to push or maybe push the base with your foot. It would be nice to have a definate solid handle to grab for mobility. Overall I rate this a 5 star fine machine. ... show more
Reviewed in the United States on January 20, 2012 by Lost Scotsman
    • Excellent
Style: 1.5 HP, 1,280 CFM Pattern Name: Dust Collector
Works very well in my shop, it's quieter than I was expecting, much quieter than my shop vac. I had it hooked up to my planer with a flex hose and it took 95% of the chips, I'm very impressed.
Reviewed in the United States on October 15, 2024 by AJ'sMadMax
    • Great suction. Very loud. Packaging destroyed but all parts OK.
Style: 2 HP, 1,550 CFM Pattern Name: Dust Collector
I would give it a five, but no instructions in the box just like many others have commented on. The card board box was destroyed as many others have commented. All Styrofoam inside the box was destroyed. I was worried about the contents when looking at the box, but all parts inside were OK. Very noisy in operation, but suction power is tremendous. Seems to be well made. Easy to put together, but need 2 folks or duct tape for the plastic bottom bag. All needed fasteners in the box. No bolts twisted off. Did not have to tap any threads. No burrs or sharp ends on any metal parts. Runs smoothly. Rolls around very easily. Cyclone and bags have some wobble due to the 3 rod supports and a little flex in the base. I hope it last 20 years like my old Penn State Industries which was still running very well when I sold it. I chose this Shop Fox dust collector over the Grizzly 2 hp Polar Bear series for two reasons - it has a steel impeller vs the aluminum on the Grizzly AND the W1665 and W1666 were mentioned in many, many dust collector reviews. I hope it was a good choice in the end. I will let you know in 20 years. ... show more
Reviewed in the United States on May 5, 2020 by Woodness
    • Great Dust Collector
Style: 2 HP, 1,550 CFM Pattern Name: Dust Collector
Review Image by Mickey J Mickey J
This is a great dust collector and as another reviewer stated: "It really sucks"! Don't get a hand too close to the unconnected 4" inlet or an attached 4" hose as you can feel it pulling you in. I replaced a 750 CFM dust collector that really didn't quite do it for my table saw and drum sander. Not in the picture that I attached a Y with 4" and 2.5" blast gates. The 4" hose has a quick connect for the table saw, lathe, router table and drum sander. I use the 2.5" as a vacuum and also on the router table. The price is right as it was about the same as the 750 CFM I replaced with nearly twice the volume. Some of the reviewers complained at how theirs arrived. My outside box was dinged up a little and the foam on the inside broken a little but there were no dents, scratches or bends in the parts inside. Easy assembly and all you need is a 240v plug that fits you socket. ... show more
Reviewed in the United States on November 19, 2024 by Mickey J Mickey J
    • Good Product, Bad Description
Style: 1.5 HP, 1,280 CFM Pattern Name: Dust Collector
Review Image by Steven Steven
Review Image by Steven Steven
Review Image by Steven Steven
Review Image by Steven Steven
Review Image by Steven Steven
Review Image by Steven Steven
Review Image by Steven Steven
Review Image by Steven Steven
Review Image by Steven Steven
Review Image by Steven Steven
I'd like to say that overall I really like this product and it works great. The reason I am giving it 3 stars is due to the inaccuracies of the description and the state that I received the product in: 1. This is definitely NOT pulling 16 amps. I have it plugged into a remote switch that is only rated at 13 amps and the whole unit is on a 15 amp circuit breaker with other tools (such as my Bosch miter saw) plugged in and running without a problem. 2. The inlet of the dust collector fan is indeed 6" but the outlet is only 5". Typically on equipment like this the outlet is always larger than the inlet which explains why they branch the inlet down to 4" (so you only connect with 4" hose). 3. I posted some pictures for how it looked when it arrived. The box was so banged up that most of the Styrofoam packaging was broken into pieces and many of the parts such as the motor mount were incredibly bent. It took some serious work to straighten them out so I could mount them to the base. 4. Both the filter bag and collector bag were in good shape and are both heavy enough for heavy use. 5. I have the unit pulling through 4" ABS piping and has more than enough suction when running one tool at a time, even at the end of a 30ft. run of overhead pipe. Luckily for me I purchased this for use with a Dust Deputy XL and am venting the fan outlet to the outside via a roof vent so I am not using the stand or the bags and the fact that most of the product was damaged didn't matter that much to me but it was frustrating all the same. And while I'm sure the shipper caused most of the damage and the late delivery, they should improve the packaging to provide more protection. ... show more
Reviewed in the United States on July 24, 2018 by Steven Steven

Can't find a product?

Find it on Amazon first, then paste the link below.