Search  for anything...
Sea Foam

Sea Foam SF-16 Motor Treatment - 16 oz. , white

    • Based on 20,242 reviews
Condition: New
Checking for product changes
$11.99 Why this price?
Save $12.25 was $24.24

Buy Now, Pay Later

As low as $2 / mo
  • – 4-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: Only 1 left in stock, order soon!
Fulfilled by The GENERAL Store
Arrives Nov 6 – Nov 8
Order within 24 minutes
Available payment plans shown during checkout

Style: Gas and Diesel Motor Treatment


Features

  • Specs: Sea Foam Motor Treatment, Notes: Cleans fuel injector and carburetor passageways, Cleans intake valve and chamber deposits, For all motor oils, conventional and synthetic, For any gas or diesel fuel blend, For cleaning, use 2 or more ounces per gallon the more you add to fuel, the better it cleans, For regular fuel system maintenance, add 1 ounce per gallon of fuel, Lubricates upper cylinders, Pour Sea Foam in your fuel tank to clean and lubricate your entire fuel system
  • Replaces OEM Numbers: Sea Foam: SF16
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement.
  • 100% New Aftermarket Sea Foam Motor Treatment built to meet OEM specifications
  • 100 percent pure petroleum
  • EPA registered product
  • Liquefies gum and varnish deposits or internal engine contaminants
  • Special Shipping Information: This item cannot be returned and has additional shipping restrictions
  • Special Shipping Information: This item cannot be returned and has additional shipping restrictions

Description

Verify the part fits before purchasing Specs: Description: Sea Foam Motor Treatment Notes: Cleans fuel injector and carburetor passageways, Cleans intake valve and chamber deposits, For all motor oils, conventional and synthetic, For any gas or diesel fuel blend, For cleaning, use 2 or more ounces per gallon the more you add to fuel, the better it cleans, For regular fuel system maintenance, add 1 ounce per gallon of fuel, Lubricates upper cylinders, Pour Sea Foam in your fuel tank to clean and lubricate your entire fuel system, Stabilizes gas and diesel fuels up to 2 years, Works in crankcase oil to liquefy harmful residues and deposits Replaces OEM Numbers: Sea Foam: SF16

Manufacturer: ‎Sea Foam


Brand: ‎Sea Foam


Model: ‎Sea Foam Motor Treatment


Item Weight: ‎1 pounds


Product Dimensions: ‎7.65 x 2.5 x 2.5 inches


Item model number: ‎SF16


Is Discontinued By Manufacturer: ‎No


Manufacturer Part Number: ‎SFM-SF16


OEM Part Number: ‎SFOSF16


Date First Available: September 27, 2017


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Nov 6 – Nov 8

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Works well
Size: 1 Pack (16 Ounce)
This seems to quiet down a noisy lifter as well as help to smooth out a rough running engine.
Reviewed in the United States on January 1, 2024 by Frank Kennedy
    • good stuff
Size: 1 Pack (16 Ounce)
this works extremely well on my '91 Chevy K1500 especially during the winter months. Cleans up the engine works and smooths out the idle. Using this I don't have to worry about using dry gas.
Reviewed in the United States on November 8, 2023 by jimb06787
    • Good product. Worked like a charm
Size: 1 Pack (16 Ounce)
Used this to get my snowblower that has been sitting for 2 years back up and running. Good product.
Reviewed in the United States on December 12, 2023 by Anthony W.
    • Mechanic Recommends Sea Foam -- Best Gas Treatment for All Engines
Size: 1 Pack (16 Ounce)
We have a small-engine mechanic who turned us onto SeaFoam motor treatment -- and against most gasoline preservatives and treatments. He said he'd drained, or seen inside, thousands of gasoline tanks, and the stuff sold as gasoline storage additives was often still there, sitting as gel on the bottom of the tank. Just gunk. He also said most brands of engine treatment weren't worth the money. However, he swore by SeaFoam, which I'd never tried at the time, and my experience since has proved him out. I've had many rough-running engines find their power and performance again, with nothing different, but a shot of SeaFoam in the gas tank (and the crankcase). We own a number of vehicles and equipment with small engines, from a compact backhoe, to a ride'em Husqvarna mower, weedwacker, chainsaw -- and on the larger size, a Honda SUV and Ford F150 pickup. All of them have benefited greatly from the regular use of SeaFoam. However, when we're running the road vehicles a lot, especially in the summer, we go through gas and don't necessarily add SeaFoam with every fill. Recently, the Ford began to run rough. It stalled as I pulled up to corners and lights. In the past, that would have meant a mechanic and an expensive tune-up. All I did was go for a fill-up, and started by adding a full can of SeaFoam. Problem solved, just like that. The Terramite (made in the USA) backhoe is not used a lot -- and as with most motors, that is a problem. It's bad for an engine not to run it -- and especially, in most cases, for it to sit with gas in the tank. The backhoe has a Kohler Command 25-horse gasoline engine that powers the hydraulics that run the wheels, steering, front-loader, and backhoe. I change the spark plugs each season, but it, like my Stihl chainsaw, and 6500 watt backup (gasoline) generator, and for that matter, all the small engines, can be hard to start after a hiatus. And even when they get going, they'll run rough. I used to drain the tanks frequently, then run them dry, then fill again before use, and hope for the best. But SeaFoam has changed all that. Throughout the summer, I can leave treated gas in the tank, and have little problems with starts or rough running. In the smaller equipment, I dose the gasoline with each fill (1 oz per gallon), as SeaFoam cleans both carburetors and full injection systems. It is good for gasoline and diesel engines. Added to your crankcase (1.5 oz per quart of oil), it cleans deposits and quiets noisy lifters. These days, most gasoline is mixed with ethanol and that's a bad thing for small engines. Ethanol goes hand in hand with water -- and as we all know, water in the gas is anathema to motors. Again, my small engine mechanic told me, 90% of the no-start problems he had to deal with were caused by ethanol-caused water in the fuel system. SeaFoam actually controls moisture and prevents this problem. It also de-ices and is anti-gel. In my opinion, when it comes to gasoline and diesel engines, large and small, SeaFoam is THE Silver Bullet. My equipment is often running, while my neighbors are running with theirs to the shop. I've told many about SeaFoam, but some people seem to want to do it the hard way. By the way, I also swear by PRI-G fuel additive for long-term gasoline storage. I keep 100 gallons of gas in tanks for emergency use. We are in a rural, wilderness area. I was introduced to that by survival expert, Steve Harris. He said he's had gasoline that was 10 years old still run equipment, because he'd added PRI-G to it (you can buy here on Amazon). Of course, you have to remember to add more PRI-G each year -- that's the catch. So our rule of thumb is, PRI-G for long term fuel storage -- and SeaFoam for month to month. Also -- this price is right! Of course, when you compare the cost of equipment breakdown, and having to take anything to a mechanic, this is almost free. However, apples to apples, this price is cheaper than Walmart -- and up to $4 cheaper per can than many auto supply and hardware stores. Can't say enough good things about this product! Highly recommended. ... show more
Reviewed in the United States on August 19, 2015 by Wilderness Family
    • Great product
Size: 1 Pack (16 Ounce)
Review Image by D. Kelson D. Kelson
Review Image by D. Kelson D. Kelson
Seafoam is a great product. Very dented can was chosen by seller to send me, as the box wasn't damaged.
Reviewed in the United States on December 31, 2023 by D. Kelson D. Kelson
    • Great product does what it says it does.
Size: 1 Pack (16 Ounce)
I somewhat recently bought a 1983 Volkswagen Vanagon With the 2,0 litre aircooled engine. I went to clean the ERG valve recently and found that it was clogged all the way with just greasy sooty gunk from the exhaust so im guessing my car has not had much of a cleanout ever and the erg filter is likely rusted out but nonetheless I knew that i could quickly and easily clean it out whereas a new erg filter costs a hundred dollars or more. I bought two bottles of Seafoam Motor treatment because its an add on item and that way i could get the discounted price without adding anything on. For my purposes I found it easiest to pour the seafoam into the hose that attaches to the auxiliary air valve as this was easy to remove and fed right into the junction past the Mass airflow sensor. The brake booster would have been more troublesome despite many people recommending it. I Believe you should just look at all the air hoses leading into the manifold of your car and choose which both won't change the way the engine runs and is easy to pour into which in many cases is the brake booster hose. I warmed up the engine so the auxiliary air valve would not be needed for engine operation, and then I had to cover the majority of the open and exposed end of the hose so the engine would not be choked by too much air, then Its a matter of putting the right amount of Seafoam in so that you don't choke it that way either. At this point you will begin seeing white smoke come out of the exhaust. This is a sign that the seafoam is burning and working properly so continue until you've used nearly a third of the bottle. I actually had trouble killing the engine at the end when you are supposed to pour enough in to kill it so I just shut off the ignition after dumping a lot in at the end. I waited about 10 minutes for it to all soak in and then restarted the engine. I let it run for a little and then began a slow drive around the neighborhood in a low gear to run the engine quickly but not too fast. This created the most smoke by far which is good because that meant it soaked well. Once the smoke stopped or slowed significantly I shut the engine off and checked in the ERG valve hole on the manifold once the engine cooled. I Could not find any more of the greasy black gunk so It worked! The rest was split between going into the fuel and the oil to clean out injectors and galleys and I plan on an oil change soon as a result. Great product does what it says it does and my engine is running much smoother now likely due to a more even mixture in a no longer impacted manifold. I also recommend watching a youtube video on how to do this, it helps to see the things I'm talking about. ... show more
Reviewed in the United States on April 23, 2016 by George B.
    • It works
Size: 1 Pack (16 Ounce)
I was very skeptical but I bought can for my 2003 Suzuki 800. I let it sit for a month. I went to start it, it would not fire at all. At first, I put a couple of ounces in ad let it site a day or so. it didn't work, so I added a little more, waited a week and BAM, it fired up. The card still needs a cleaning, but at least now it is drivable. ... show more
Reviewed in the United States on January 29, 2024 by Dave Bova

Can't find a product?

Find it on Amazon first, then paste the link below.