Mini Bench Drill Press, 110V 340W Portable Drill Workbench, Light-Duty DIY Craft Drilling Repair Tool Expanding Drilling Machine Pressed-in Chuck 1-10mm USA STOCK

Features

• Premium Drill PressThe mini benchtop drill press adopts full copper wire motor and cast iron base. The breakage rate of the drill bit is low, and the whole machine runs smoothly and has a long service life. Since it uses a full copper motor, it will minimize the noise when the machine is running.
• Three Speed AdjustableDrilling diameter is 1-10mm, the spindle is about 155mm away from the drill bit center, max spindle travel is 25mm. It has speed regulation function, the first gear is 1800 -8000r/min, the second gear is 2200 -10000r/min, and the last gear is 2600 -12000r/min. . It allows you to operate at a suitable and precise speed, which is more efficient and accurate.
• Easy to Install and OperateWe are equipped with detailed instructions for installation and use. The package is also equipped with a complete set of parts. And the desktop design and the way of pushing the handle for operation are more time-saving and labor-saving. It is easier to operate than hand-held drills.
• Compact StructureThis mini benchtop drill press offers most of the features that a large benchtop drill press can offer in a smaller size, saving you a lot of space in your shop and making a great addition to your workbench.
• Wide ApplicabilityIt is mainly used for commercial use, such as drilling wood, plastic board, resin board, aluminum, composite board and other non-rigid materials in the market. It can also be used for home use, such as DIY or installing furniture, etc.

Description

DescriptionThe entire body of this mini benchtop drill press is made of high- quality materials. The breakage rate of the drill bit is extremely low. It uses a full copper wire motor and a cast iron base, which makes the whole machine run smoothly. It is easier to operate than handheld drills. It is mainly used for drilling wood, plastic board, resin board, aluminum, composite board and other non-rigid materials. ApplicationIt is mainly used for commercial use, such as drilling wood, plastic board, resin board, aluminum, composite board and other non-rigid materials in the market. It can also be used for home use, such as DIY or installing furniture, etc.Specification Clamp Diameter: 0.1-1cmRated Input Power: 340WVoltage: 220V ACRated Frequency: 50HzDownfeed Travel: 4cm/1.57inchNo-load Speed（RPM):I:1800 -8000r/minII:2200 -10000r/minIII:2600 -12000r/minMax Stroke: 2.5cm / 0.98inchTable Top Size: Approx 17 x 17 x 38cm / 6.69 x 6.69 x 14.96inchWeight: Approx 5.542kg/12.22lbsPackage Included1Host 1 collet key 2 Allen wrench 1 pair of carbon brushes 1belt1English Manual Notes1. Please read the user manual carefully before use and pay special attention to the safety precautions included.2. Please allow a slight color difference due to shooting light, and a 1-3cm error due to manual measurement, please make sure you don't mind before ordering.

Brand: DYRABREST

Power Source: 有线电动

Maximum Rotational Speed: 12000 RPM

Voltage: 110 Volts, 220 Volts

Product Dimensions: 6.69"L x 6.9"W x 15.15"H

Brand: ‎DYRABREST

Power Source: ‎有线电动

Maximum Rotational Speed: ‎12000 RPM

Voltage: ‎110 Volts, 220 Volts

Product Dimensions: ‎6.69"L x 6.9"W x 15.15"H

Maximum Power: ‎340 Watts

Manufacturer: ‎SinAnShun

Date First Available: August 30, 2023