$209.99
Holiday Deal
· 56% off
was $479.99
Buy Now, Pay Later
As low as
$35.00
/ mo
Learn more
- – 6-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Zip, Apple Pay, and Google Pay. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
Extended holiday returns
FREE refund/replacement until Jan 31, 2027 Learn more
FREE refund/replacement until Jan 31, 2027 Learn more
This item's return window has been extended for the holiday season: FREE refund/replacement until Jan 31, 2027
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Monday, Nov 16
Recently Viewed
At a glance
- Condition
- New
- Model
- MIG250PRO-HM
- Weight
- 32.9 lb
- Color
- Black
- Power Source
- ac
- In the box
- mig weldermig torch,earth clampelectrode holder,teflon linerwelding helmet
Features 5
- 6 in 1 Welding Machine: The multi-function welding machine included Gas/Solid Wire MIG, Gasless Flux Core MIG, Stick/MMA, Spot welding, Lift TIG, spool gun compatible (tig gun and spool gun not included,WP-17V-35,LBT150).This machine fits plenty of welding scenarios to satisfy all your welding requirements.
- VERSATILE WELDING CAPABILITIES: Featuring a powerful 250A output and 110V/220V dual voltage design, our welder delivers reliable quality and consistent welding performance. Suitable for auto repair, construction, metal fabrication and DIY projects. It can weld thin and thick workpieces including steel, stainless steel and aluminum, and supports both 2LB and 10LB wire spools for greater flexibility in your welding work.
- SYNERGIC & MANUAL MIG: When adjusting the wire feed speed, the machine automatically matches the recommended voltage, and fine voltage tuning is available within -3V~+3V, which is ideal for beginners. You can also manually set wire feed speed and voltage according to your preference to meet the needs of skilled welders.
- DIGITAL LED DISPLAY: Built with a clear digital LED display to optimize your welding experience. It delivers sharp readouts to boost operating efficiency. You can view real-time welding current for precise control during operation.
- BLUE LIGHT PROTECTION WELDING HELMET : This welding helmet comes with an advanced blue light-blocking outer lens. It filters most harmful high-energy blue light produced during welding while retaining low-risk blue light, effectively protecting your eyes. Enjoy reliable eye safety and comfort even during long welding operations.
Specs 6
| Manufacturer | FEMEROL |
|---|---|
| Item Weight | 32.9 pounds |
| Package Dimensions | 22 x 19.75 x 16.5 inches |
| Item model number | MIG250PRO-HM |
| Color | Black |
| Power Source | ac |
No specs match.
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Monday, Nov 16
Yes, absolutely! This item's return window has been extended for the holiday season: FREE refund/replacement until Jan 31, 2027.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- Zip Pay in 4
- Financing through Apple Pay
- Financing through Google Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
More machine than I can use, at least for now
Model: MIG250PRO-HM
First I must state, I am no professional welder, just someone that likes to make projects that complete a task I am after. So this is from a total beginner, especially to wire-fed welding. The manual was a little help in setting up, but had to jump to videos and AI for certain steps because the pictures were a bit small and could not really tell what they were trying to show me. After a little hiccup getting the wire through to the torch (tip had a burr) I was ready to test this machine out. Set the settings and away I went, first thing is I could not see the puddle very well, so probably had the helmet set wrong. But I managed to lay down a bead on a chain hook to a steel pipe to make a DIY root puller. It wasn't pretty, but it will hold, I really need plenty of practice to make beads as good as the ones on the tube, but I get the job done, and the grinder cleans up my mess pretty well. I make better beads with a stick welder, so it is a good thing this supports that as well. I placed some magnets on the extra rollers to stick inside the cabinet to keep them from rolling around and possibly mess something up. I like that it is capable of welding aluminum, as many pieces of equipment now come in aluminum to save on weight. This makes for a great machine to practice with, and you can add a spool gun for aluminum or TIG torch when you are ready to try that, which I eventually will as I like to tinker.
...
show more
Reviewed in the United States on October 16, 2026 by J. Ornelas
These welders have come a long way, many new features to make welding very easy.
Model: MIG250PRO-HM
I would consider myself an amateur, beginner, novice, newb when it come to welding. I also only have access to 110v, and no controlled environment to play in. I made arraignments to use a friends shop to use for this review. Units that we used as a comparison are His shop units, mostly Lincoln dedicated machines. The 220v power outlet he had was the three blade connector, like a stove 220v, while the femerol adapter was a 2 blade with a ground, like a dryer connector, so unfortunately we were limited to 110v. The Amperage was capped out at 163 amps. We got a few pieces of mild steel, some 1mm'ish, and some 1/4” and 3/8” plate, and a lump of heavily welded on hardened steel. Included in the Femerol package was a MMA stinger, ground, Mig Torch, power adapter (110v->220v), an auto darkening helmet, a cheap chipping tool, and some additional tips, wire feed rollers of various sizes, and an extra wire feed liner. Consumables that we used were Flux core 8mm wire, 6011, and 6013 welding rods. Units we had readily available to use as comparison, were an easy 180(mig), and a tombstone(MMA). The performance of the welder was excellent. The screen is clear and easy to read, the connectors are labeled. The spool was a little hard to feed, and had 1 bind/short inside the case when we were setting it up. Tensioner was useful and drive wheel was easy to swap. We tried manual settings at various levels, and synergic mode, which is absent on the easy 180. The main difference between the welders is price, weight and features. This welder has an excellent set of features for the price and weight. To put into perspective, without wire, the easy 180 weighs 56lbs(two hands to lift), verse the 250a Pro which weighs 32lbs(one hand easy). The cost difference is very significant with the Femerol unit being at least ¼ the price, for ten times the performance and options. The synergic setting was flawless, with minimal BBs and splattering while producing a very strong weld with acceptable strength. This option is unavailable on the easy 180, and the amount of BBs and splattering was significantly higher while using the same manual settings on the Femerol product. Mma comparison, hands down beat out the old tombstone in quality and performance, with no sticking at all, even when trying to force failure. The start and stop was excellent, the puddle was nice and deep, and the strength of the resulting weld was unbreakable. While the tombstone could probably run a longer duty cycle, the difference in performance is immediately apparent. The features of the newer technology is just far better. This unit did not include a tig accessory. So I cannot comment on that. Some drawbacks. The accessories are EU, and service locally for repair is probably non-existant. The power connector and wiring is not similar, and will most likely need a dedicated outlet(I'm in the USA). There was a small amount of damage to the unit, cosmetic not affecting function. The cooling fan is very small, smaller than my computers have, while we didn't feel any excessive heat, it might benefit from a larger or multiple fans. Overall, very impressive machine and I would highly recommend it for any beginner due to ease of use. For experienced welders, they would benefit from the lightweight and portability. I did not have a chance to try on a generator, but it should have no problem. Value for your money, is very good, although It may be cheaper to replace than to repair if it breaks down. The cost is low enough to make this a giftable starter unit for an up in coming young welder.
...
show more
Reviewed in the United States on September 13, 2026 by Enniebudy
Good beginer MIG welder kit.
Model: MIG250PRO-HM
This welder kit would be good for someone starting out. The included hood is basic but has very good clarity, and the welder itself is surprisingly good for the price. Not everything was perfect, but overall better than other machines I have used. Firstly is the packaging which was not fantastic. The wleder and accessories were well padded and packed, but the hood was not as well packed, and was a bit squished. After unpacking, I noticed several interesting Items. The kit includes a smooth liner and U shaped drive roll for feeding aluminum wire. Quite nice for a machine in this price bracket. I also noticed the nice all metal drive system. The spool holder is OK for small spools, but a bit awkward with 10lb spools. Next is the MIG gun which is also very nice with a ball socket at the base. The stick stinger and ground clamp are basic but functional. Some things I found not as great are the lack of a threaded gas port (it's just a barb fitting) and a regulator would have been nice to include. The included accessories are also bare minimum. The other drive rolls are a 0.8 and 0.9mm solid wire roll, and a 0.8 and 0.9mm knurled. There is not drive roll for the thinner MIG wire (0.6mm/ 0.023"). There are two extra nozzles, but only one 0.9mm contact tip and two 0.8mm tips. No aluminum 1mm tip although it came with the rolller. I was also not fond of having the fixed plug on the machine be a 120v plug and the adapter be the 220v to 120v type. I think having the 220v plug on the machine is safer sice you can't use the adapter to overload something else if you inadvertently use it. The fixed plug should also be the one with the higher current rating. Operating the machine is very easy and intuitive. The display is decently bright and easy to read and navigate. Oddly the wire speed is in meters per minute and not inches. I did not find a way to change it. The machine has manual and synergic MIG modes, but the synergistic settings are not as good as in other machines I have used. Another surprise at this price range was power. On manual MIG the machine probably meets its current output spec as it maxed out my 200a meter without a problem. On MMA mode it does fall short and seems to max out around 180A when set to 250A on the display. Overall a good value and nice enough for someone starting out.
...
show more
Reviewed in the United States on September 12, 2026 by Raul A. Lugo
I highly recommend this welder! It is absolutely wonderful
Model: MIG250PRO-HM
Well it works well! I had to go to my brothers to test since we dont have proper wiring set up in out apartment building. Thankfully he had gas and proper wire for it. I tested the stick portion first and as most sticks do it powered through materials like it wasnt even there. My brother hooked up the gas portion for me and walked me through that and we ran some wire welding on some exhaust he was tryin to work on and the welder did great! Everything is easy to adjust once you read and you with the settings. There is a toggle inside the panel on the right side of the welder that changes what output you are using. The machine comes with wheels for the wire feed, a wire feed line. I had to rely on my brother to figure out the gas line portion of everything because i havent used gas yet. Using a wire welder with gas makes a huge difference and this welder is priced well for having the multiple welding abilities. The machine is originally a 110v but comes with a 110 to 220v adapter. The welder has already proved itself worthy of the order and im ahppy it has! The price is fair and i would definitely recommend to people!
...
show more
Reviewed in the United States on September 1, 2026 by nikki w Lonewolf1643
A lot of welding capability in one machine
Model: MIG250PRO-HM
This is the kind of tool that makes more sense for my husband than for me, and I like that it combines several welding processes in one machine instead of requiring multiple separate units. The listing includes gas MIG, flux-core MIG, spool gun support, lift TIG, stick, and spot welding, so it is designed to cover quite a few different jobs. The large display and synergic control also make the setup seem more approachable, especially for someone who does not want to manually fine-tune every setting from scratch. It runs on both 110V and 220V, which gives more flexibility depending on the workspace and the type of job. Including a helmet in the package is also useful because it makes the setup feel more complete. Overall, this is a versatile multiprocess welder for DIY work, repairs, and home projects. For my husband, the appeal is having one machine that can handle different welding methods without taking over the whole workspace.
...
show more
Reviewed in the United States on September 28, 2026 by Kayla DeMarco
Suprisingly good MIG
Model: MIG250PRO-HM
I've only used Miller and Lincoln MIG welders before. This is my first time trying FEMEROL. I recently got their FEMEROL Plasma Cutter & Stick Welder and it surprised me. Works really well. This MIG is surprisingly good as well. I tried it on 120V, flux core, no gas. Really impressed with how well it worked. I really liked the wire feed. I hear a lot of complaints about wire feed on cheaper welders. This one did fine. Same kind of solid mechanical feel I look for on my Knipex and Wera tools. The helmet worked, but it's a little slow to darken. I'm still getting a flash. I have a better helmet I'll use anyway. Even without the helmet this package is still a good value. If they sell a version without the helmet, I'd suggest getting that and spending the difference on a better helmet. Hobart (same company as Miller) is a good cheap helmet. I've gotten that same kind of value from SK, Bosch, Festool, Stanley, and Kreg.
...
show more
Reviewed in the United States on September 11, 2026 by Randall