That product is currently unavailable. Please try a different product or see this article for help.
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration

DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration

DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
DAYBETTER Led Strip Lights 32.8ft 10m with 44 Keys IR Remote and 12V Power Supply Flexible Color Changing 5050 RGB 300 LEDs Light Strips Kit for Home, Bedroom, Kitchen,DIY Decoration
$50.59 Why this price?
Checking for changes Product info up-to-date Product info updated We've detected that this product is out of stock. Enter your email below and we will notify you when it is available.
Buy Now, Pay Later
As low as $ / mo
- month term
- No impact on credit score
- Quick & easy checkout
- Legal stuff:
Promotional Offer
Estimations exclude tax, and assume no other Klarna balances. Non-promotional balances have a 19.99% APR and a $2 monthly minimum interest charge. Accounts are subject to credit approval, and issued by WebBank, member FDIC.

Free shipping on this product


Availability: In Stock
Fulfilled by Amazon

Features

  • STRONG SELF ADHESIVE: Our LED strip lights have a stronger 3M adhesive that is stronger than other LED strip brands. For example, they stick well on TVs, cars, cabinets and walls, please test the lights before installation.
  • LED LIGHTS FEATURES: Ultra bright and high-quality LED chips allows the LED lights to be very colorful and durable. The remote can dim the LED light strip and offer 44 different colors and modes.
  • CUTTABLE and LINKABLE: The LED strip lights could be cut every 3 LEDs along the cutting marks easily. You can buy some connectors to mix and match lengths and sizes with you desk, bed, tv, computer indoor(The package does NOT INCLUDED connectors, please purchase 10mm non-waterproof connectors).
  • WIDELY USE: The lights are very suitable for bedroom room, kitchen, cabinet, car, living room, party, Christmas or wedding. Please notice to connect the white controller box's 4-pin port arrow to positive ”12V+” of lights. And two rolls led strip lights should be attached in parallel, not in series.
  • SATISFACTIONS: Every item you purchased from DAYBETTER can enjoy a replacement or full refund within 12 months.If your product is has a manufacturer defective. Just click GET HELP WITH ORDER under your order ID. Our customer service team would be happy to assist your issue.

Description

DAYBETTER is a company that focuses on creating the best lighting experiences by constantly pursuing the highest quality products and being endlessly innovative. DAYBETTER products are the result of our industry-leading research & development, manufacturing, and sales departments, and our mission to make your life more colorful indoors. Our LED strip lights are IP20 Non-waterproof with unlimited colors and 8 light patterns: Fast/ Slow/ Auto/ Flashing/ 3 color jump change/ 7 color jump change/ 3 color fade change/ 7 color fade change and R/G/B increase and decrease. The LED strips are ideal for kitchens, under cabinets, in the dining room, bedrooms, TV backlighting, in cars, around mirrors, balconies, patios, parties, holidays, or family events. What You Get: 2 rolls 16.4ft/5M RGB LED strip, 12V/5A power supply, IR box controller, 44 key remote control. No other accessories are required. Our LED strip lights are IP20 Non-waterproof with unlimited colors and 8 light patterns: Fast/ Slow/ Auto/ Flashing/ 3 color jump change/ 7 color jump change/ 3 color fade change/ 7 color fade change and R/G/B increase and decrease. The LED strips are ideal for kitchens, under cabinets, in the dining room, bedrooms, TV backlighting, in cars, around mirrors, balconies, patios, parties, holidays, or family events. Used for kitchen, they are stick well on cabinets and walls. Used for living room decoration for backlight, under desk, behind TV, The lights can use for home lighting. Long life span and low voltage. It is suitable for lighting the bedroom, About DIY function, Please follow the steps below: Step 1: Turn on the lights. Press one of the RGB buttons. For example, press red button if you want to DIY red color. Step 2: Press the DIY1 button (the lights will change to white color for the first time). Step 3: Press and hold (at least 5 seconds) green and blue down arrow buttons, the lights will start changing. If you need lighter red color, press and hold the red up button, the longer you hold, the lighter red color you have. You can also press green and blue down, the changing will be more clearly Step 4: Keep the color you just set by pressing the DIY1 button again. Step 5: Repeat the steps above to set the rest of five DIYs 3M adhesive is stronger than other blue strip LED brands and lets you place the LED strip almost anywhere, including on the back of TVs, tables, cabinets and windows. TIP: the adhesive is very strong so use caution when using it on white walls or unfinished wood. If you have any problems or questions about how to use the lights our professional service team can provide assistance within 24 hours. LED strip lights can be cut between every 3rd LED, letting you DIY the strips to a customized length. Attention: Please confirm your connection is correct, below is some steps need to notice:


Brand DAYBETTER


Part Number R5032-RGB


Item Weight 15.2 ounces


Package Dimensions 6 x 6 x 2.5 inches


Item model number FLSL-R5032-RGB-US


Style Modern


Color Rgb (Red, Green, Blue)


Shape Strip


Material Plastic


Number of Lights 2


Voltage 12 volts


Fixture Features Dimmable


Shade Material Plastic


Light Direction Adjustable


Power Source AC/DC


Batteries Included? No


Batteries Required? No


Type of Bulb LED


Wattage 60 watts


ASIN B07SPZ2HGT


Customer Reviews 4.1 out of 5 stars 7,044 ratings 4.1 out of 5 stars


Best Sellers Rank #8 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #2 in LED Strip Lights


Shipping Weight 15.2 ounces (View shipping rates and policies)


Date First Available June 4, 2019


Shipping

This product includes free shipping to all US addresses.


Delivery

Unless otherwise stated above, most products arrive within 2-3 business days. Larger items may take 6-9 business days. Tracking information will be automatically provided as soon as your order ships.


View our full shipping policy here.

Returns

This product can be returned within 30 days of delivery for a full refund. Please visit our returns center to begin a return.

View our full returns policy here.

Features

  • STRONG SELF ADHESIVE: Our LED strip lights have a stronger 3M adhesive that is stronger than other LED strip brands. For example, they stick well on TVs, cars, cabinets and walls, please test the lights before installation.
  • LED LIGHTS FEATURES: Ultra bright and high-quality LED chips allows the LED lights to be very colorful and durable. The remote can dim the LED light strip and offer 44 different colors and modes.
  • CUTTABLE and LINKABLE: The LED strip lights could be cut every 3 LEDs along the cutting marks easily. You can buy some connectors to mix and match lengths and sizes with you desk, bed, tv, computer indoor(The package does NOT INCLUDED connectors, please purchase 10mm non-waterproof connectors).
  • WIDELY USE: The lights are very suitable for bedroom room, kitchen, cabinet, car, living room, party, Christmas or wedding. Please notice to connect the white controller box's 4-pin port arrow to positive ”12V+” of lights. And two rolls led strip lights should be attached in parallel, not in series.
  • SATISFACTIONS: Every item you purchased from DAYBETTER can enjoy a replacement or full refund within 12 months.If your product is has a manufacturer defective. Just click GET HELP WITH ORDER under your order ID. Our customer service team would be happy to assist your issue.

Description

DAYBETTER is a company that focuses on creating the best lighting experiences by constantly pursuing the highest quality products and being endlessly innovative. DAYBETTER products are the result of our industry-leading research & development, manufacturing, and sales departments, and our mission to make your life more colorful indoors. Our LED strip lights are IP20 Non-waterproof with unlimited colors and 8 light patterns: Fast/ Slow/ Auto/ Flashing/ 3 color jump change/ 7 color jump change/ 3 color fade change/ 7 color fade change and R/G/B increase and decrease. The LED strips are ideal for kitchens, under cabinets, in the dining room, bedrooms, TV backlighting, in cars, around mirrors, balconies, patios, parties, holidays, or family events. What You Get: 2 rolls 16.4ft/5M RGB LED strip, 12V/5A power supply, IR box controller, 44 key remote control. No other accessories are required. Our LED strip lights are IP20 Non-waterproof with unlimited colors and 8 light patterns: Fast/ Slow/ Auto/ Flashing/ 3 color jump change/ 7 color jump change/ 3 color fade change/ 7 color fade change and R/G/B increase and decrease. The LED strips are ideal for kitchens, under cabinets, in the dining room, bedrooms, TV backlighting, in cars, around mirrors, balconies, patios, parties, holidays, or family events. Used for kitchen, they are stick well on cabinets and walls. Used for living room decoration for backlight, under desk, behind TV, The lights can use for home lighting. Long life span and low voltage. It is suitable for lighting the bedroom, About DIY function, Please follow the steps below: Step 1: Turn on the lights. Press one of the RGB buttons. For example, press red button if you want to DIY red color. Step 2: Press the DIY1 button (the lights will change to white color for the first time). Step 3: Press and hold (at least 5 seconds) green and blue down arrow buttons, the lights will start changing. If you need lighter red color, press and hold the red up button, the longer you hold, the lighter red color you have. You can also press green and blue down, the changing will be more clearly Step 4: Keep the color you just set by pressing the DIY1 button again. Step 5: Repeat the steps above to set the rest of five DIYs 3M adhesive is stronger than other blue strip LED brands and lets you place the LED strip almost anywhere, including on the back of TVs, tables, cabinets and windows. TIP: the adhesive is very strong so use caution when using it on white walls or unfinished wood. If you have any problems or questions about how to use the lights our professional service team can provide assistance within 24 hours. LED strip lights can be cut between every 3rd LED, letting you DIY the strips to a customized length. Attention: Please confirm your connection is correct, below is some steps need to notice:


Brand DAYBETTER


Part Number R5032-RGB


Item Weight 15.2 ounces


Package Dimensions 6 x 6 x 2.5 inches


Item model number FLSL-R5032-RGB-US


Style Modern


Color Rgb (Red, Green, Blue)


Shape Strip


Material Plastic


Number of Lights 2


Voltage 12 volts


Fixture Features Dimmable


Shade Material Plastic


Light Direction Adjustable


Power Source AC/DC


Batteries Included? No


Batteries Required? No


Type of Bulb LED


Wattage 60 watts


ASIN B07SPZ2HGT


Customer Reviews 4.1 out of 5 stars 7,044 ratings 4.1 out of 5 stars


Best Sellers Rank #8 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #2 in LED Strip Lights


Shipping Weight 15.2 ounces (View shipping rates and policies)


Date First Available June 4, 2019


Shipping

This product includes free shipping to all US addresses.


Delivery

Unless otherwise stated above, most products arrive within 2-3 business days. Larger items may take 6-9 business days. Tracking information will be automatically provided as soon as your order ships.


View our full shipping policy here.

Returns

This product can be returned within 30 days of delivery for a full refund. Please visit our returns center to begin a return.

View our full returns policy here.

Features

  • STRONG SELF ADHESIVE: Our LED strip lights have a stronger 3M adhesive that is stronger than other LED strip brands. For example, they stick well on TVs, cars, cabinets and walls, please test the lights before installation.
  • LED LIGHTS FEATURES: Ultra bright and high-quality LED chips allows the LED lights to be very colorful and durable. The remote can dim the LED light strip and offer 44 different colors and modes.
  • CUTTABLE and LINKABLE: The LED strip lights could be cut every 3 LEDs along the cutting marks easily. You can buy some connectors to mix and match lengths and sizes with you desk, bed, tv, computer indoor(The package does NOT INCLUDED connectors, please purchase 10mm non-waterproof connectors).
  • WIDELY USE: The lights are very suitable for bedroom room, kitchen, cabinet, car, living room, party, Christmas or wedding. Please notice to connect the white controller box's 4-pin port arrow to positive ”12V+” of lights. And two rolls led strip lights should be attached in parallel, not in series.
  • SATISFACTIONS: Every item you purchased from DAYBETTER can enjoy a replacement or full refund within 12 months.If your product is has a manufacturer defective. Just click GET HELP WITH ORDER under your order ID. Our customer service team would be happy to assist your issue.

Description

DAYBETTER is a company that focuses on creating the best lighting experiences by constantly pursuing the highest quality products and being endlessly innovative. DAYBETTER products are the result of our industry-leading research & development, manufacturing, and sales departments, and our mission to make your life more colorful indoors. Our LED strip lights are IP20 Non-waterproof with unlimited colors and 8 light patterns: Fast/ Slow/ Auto/ Flashing/ 3 color jump change/ 7 color jump change/ 3 color fade change/ 7 color fade change and R/G/B increase and decrease. The LED strips are ideal for kitchens, under cabinets, in the dining room, bedrooms, TV backlighting, in cars, around mirrors, balconies, patios, parties, holidays, or family events. What You Get: 2 rolls 16.4ft/5M RGB LED strip, 12V/5A power supply, IR box controller, 44 key remote control. No other accessories are required. Our LED strip lights are IP20 Non-waterproof with unlimited colors and 8 light patterns: Fast/ Slow/ Auto/ Flashing/ 3 color jump change/ 7 color jump change/ 3 color fade change/ 7 color fade change and R/G/B increase and decrease. The LED strips are ideal for kitchens, under cabinets, in the dining room, bedrooms, TV backlighting, in cars, around mirrors, balconies, patios, parties, holidays, or family events. Used for kitchen, they are stick well on cabinets and walls. Used for living room decoration for backlight, under desk, behind TV, The lights can use for home lighting. Long life span and low voltage. It is suitable for lighting the bedroom, About DIY function, Please follow the steps below: Step 1: Turn on the lights. Press one of the RGB buttons. For example, press red button if you want to DIY red color. Step 2: Press the DIY1 button (the lights will change to white color for the first time). Step 3: Press and hold (at least 5 seconds) green and blue down arrow buttons, the lights will start changing. If you need lighter red color, press and hold the red up button, the longer you hold, the lighter red color you have. You can also press green and blue down, the changing will be more clearly Step 4: Keep the color you just set by pressing the DIY1 button again. Step 5: Repeat the steps above to set the rest of five DIYs 3M adhesive is stronger than other blue strip LED brands and lets you place the LED strip almost anywhere, including on the back of TVs, tables, cabinets and windows. TIP: the adhesive is very strong so use caution when using it on white walls or unfinished wood. If you have any problems or questions about how to use the lights our professional service team can provide assistance within 24 hours. LED strip lights can be cut between every 3rd LED, letting you DIY the strips to a customized length. Attention: Please confirm your connection is correct, below is some steps need to notice:


Brand DAYBETTER


Part Number R5032-RGB


Item Weight 15.2 ounces


Package Dimensions 6 x 6 x 2.5 inches


Item model number FLSL-R5032-RGB-US


Style Modern


Color Rgb (Red, Green, Blue)


Shape Strip


Material Plastic


Number of Lights 2


Voltage 12 volts


Fixture Features Dimmable


Shade Material Plastic


Light Direction Adjustable


Power Source AC/DC


Batteries Included? No


Batteries Required? No


Type of Bulb LED


Wattage 60 watts


ASIN B07SPZ2HGT


Customer Reviews 4.1 out of 5 stars 7,044 ratings 4.1 out of 5 stars


Best Sellers Rank #8 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #2 in LED Strip Lights


Shipping Weight 15.2 ounces (View shipping rates and policies)


Date First Available June 4, 2019


abunda_amazon_reviews My wife and I recently had a screened porch converted to a sunroom, and my wife wanted to add some sort of mood/celebratory lighting. After considering a number of options, we found the Daybetter R5032 at a terrific price, and placed an order for one package. Once we received the R5032 package, and started considering how we could mount the LED strip(s) we decided we would like to mount the light strips in a trough near the ceiling and use them to provide indirect lighting for the room. The two 5 meter LED strips would allow us to place lighting along two walls of the sunroom. Not being able to decide which two walls should carry the lights, it seemed to make more sense to place the lighting all the way around the room so we considered ordering a second R5032. This would mean that we would have two controllers, and two IR receivers possibly placed in two different locations in the room. The LED strips come with connectors on both ends making it seem like they could be connected in series, but this is not supported by Daybetter. The controller has two separate leads each of which connects to one of the 5 meter LED strips. Connecting both LED strips in series to one of the controller power leads would burn out the controller. In order to place both IR receivers in the same location, but have one of these controllers control lights that were 5 meters away, we needed extension cables that would allow power from one controller to run to a LED strip 5 meters away. I contacted Daybetter customer support to ask if they sold such extension cables. The next day I received an email that said they did not carry any such cables, but they did provide a link to a company that sold such cables through Amazon, and they were willing to help offset the cost of the cables. Thanks to this quick response, I ordered a second R5032 package from Daybetter, and a set of 4 four-conductor 3 meter extension cables from HUALAND. Connecting two of the extension cables together gave me enough length to reach an LED strip 5 meters away. The next issue became how to build a trough in which the LED stips could be mounted. I found a solution at my local Lowes where I discovered a vinyl door edge that was a bit larger than the 0.5 inch width and height needed to conceal the LED strip. The size was perfect (UnmountedTrough.jpg), and the price was a tenth of what wood trim would cost to cover the same length. Since the trough was vinyl, I needed to insure that the LED strips did not generate enough heat to melt them so I laid out the LED strips and turned them on to full brightness to evaluate the amount of heat generated by the circuitry on the strip. The heat through the resistors on the LED strip was barely detectable. I painted the door edge trough and installed it at the bottom edge of a 1 x 2 trim piece that already went around the room (Trough+IRsensors.jpg). I ended up installing the LED strip along the back edge of the trough rather than the bottom of the trough because I did not think the horizontally oriented LED strip would bend nicely around 90 degree corners (LEDinTrough.jpg). Bending a vertically oriented LED strip around the room's 90 degree corners was no problem. Once the trough and the LED strips were installed, I then needed to place two power packs and two controllers somewhere hopefully out of sight. An attic is directly above the sunroom so I decided to drill a hole in one corner of the sunroom ceiling, and route the 4 conductor power cables through the hole into the ceiling where the two power packs and the two controllers would be mounted. The power pack cords were long enough to allow them to be installed almost anywhere convenient in the attic (PowerPacks+Controllers). The two controller modules had to be installed right next to the hole in the attic floor so that the IR receiver cables could pass through the hole and be aimed out to the center of the sunroom (Trough+IRsensors.jpg). One remote control sends a command that is received by both controllers so all light strings react in unison. The results are highly satisfactory as I hope can be seen from some of the included pictures (LEDsunroom1-7.jpg). The light strips provide a wide range of colors at about 5 intensity levels, and the adhesive backing made mounting in the trough super simple. The product works great for us, and the customer support was outstanding.;;Reviewed in the United States on November 8, 2019;;5.0 out of 5 stars;;Works as described...Support is terrific!;;Stephen L.;;/gp/customer-reviews/R2NWT8U339B0Y3/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B07SPZ2HGT;;;So I just purchased these lights and so far so good. I had another set by another company that was a little bit thicker and the adhesive wasn’t as strong so kudos to DayBetter. First off I want to start with unboxing and work my way through. Also from my video keep in mind I have 4 strips across. The two that came in one box covered from my light switch all the way to the middle of my tv. The rest of the door and the wall above my window was done with two more strips and 3 connectors. Unboxing: The box is pretty small but both strips of lights are rolled up inside neatly. They leave a little extra slack on the end of the 3M adhesive so you can start it easily with out having to pick at the beginning or cut anything. The 12v AC/DC adapter comes with this as well as the RGB control box with two connectors and the IR Receiver. Application: I tested all strands of lights out and they worked perfectly fine. The reason I said 4 stars on brightness is because I haven’t seen them all at night yet (only saw two strips not 4. Will update afterwards.) the 3M tape on the back of the lights peels off with ease. When applying make sure you have your lights lined up the way you’d like them because the tape is pretty strong. Besides that the lights go on fairly easy and I don’t think falling off will be an issue at all with these. Display: The colors all function properly and are quite vibrant. I still don’t know how to work the custom feature yet but I’m sure someone does or will figure it out. I’m pretty content on the colors already provided. Connecting: So like I said I have 4 strips on here. I had to use three connectors total but it doesn’t weaken the power or dim the lights at all. I bought them on amazon as well and the product name is “ TronicsPros 10pcs 4 Pin Solderless Waterproof LED Strip to Strip Connector RGB Flex LED Ribbon LED Rope LED Tape Light Gapless Adapter for 10mm Wide Waterproof SMD 5050 RGB Flexible LED Strip Light”. I had to flip them upside down I guess to get them to touch the GRB strip. Make sure that they are on the same way otherwise you may get two different colors. To open them I just used a mini flat head and gave it a light twist and the opened with ease! I’ve added pictures here and if you have any questions please feel free to reach out!;;Reviewed in the United States on February 17, 2020;;5.0 out of 5 stars;;Please Read*** DayBetter Detailed Review;;Jason Diaz;;/gp/customer-reviews/R3NH4HOKG3MLVW/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B07SPZ2HGT;;;These lights are awesome! They came super fast!! And we’re exactly what my daughter wanted! Of course she wanted them to be like all of the people on TikTok 🤣 and theses lights did not disappoint!! We actually had to order 2 boxes to complete her whole room but these are great!! Would highly recommend!;;Reviewed in the United States on March 14, 2020;;5.0 out of 5 stars;;These lights are worth it!;;Tara N.Noe;;/gp/customer-reviews/R1570D12IMZBLX/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B07SPZ2HGT;;;So happy that I took the time to compare all the products to determine which is the best LED strip lights out there, and this is without the doubt the best one! It sticks well to the wall. If you need to adjust after you already applied it, you just peel the strips off slowly (so that the paint doesn't come off), and reapply it where you want it! I do want to point out something that would be helpful for y'all. -- If you're looking for connectors to connect separate strips, DAYBETTER suggests "5050 4Pin Non-Waterproof RGB LED Strip Connector Kit includes 2 x Female Connector Wire, 2x L Connector Cable, 3x L Shape Connectors, 3x gapless Connector, 10x LED strip light clip,5x 4-pin Male Conne " on Amazon! Do not purchase these connectors "TronicsPros 10pcs 4 Pin Solderless Waterproof LED Strip to Strip Connector RGB Flex LED Ribbon LED Rope LED Tape Light Gapless Adapter for 10mm Wide Waterproof SMD 5050 RGB Flexible LED Strip Light" that is seen as "Frequently Bought Together" with DAYBETTER LED strips. These waterproof connectors don't work as they aren't compatible with non-waterproof LED strips.;;Reviewed in the United States on January 15, 2020;;5.0 out of 5 stars;;Fantastic, Durable LED Strips & Only Non-Waterproof Connectors Work!;;Nat;;/gp/customer-reviews/R36Y31XV9DXTLV/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B07SPZ2HGT

Shipping

This product includes free shipping to all US addresses.


Delivery

Orders placed now will arrive in 6-9 business days. Tracking information will be automatically provided as soon as your order ships.


View our full shipping policy here.

Returns

This product can be returned within 30 days of delivery for a full refund. Please visit our returns center to begin a return.

View our full returns policy here.

Top Amazon Reviews


5.0 out of 5 stars
By Stephen L. - Reviewed in the United States on November 8, 2019
Works as described...Support is terrific!
My wife and I recently had a screened porch converted to a sunroom, and my wife wanted to add some sort of mood/celebratory lighting. After considering a number of options, we found the Daybetter R5032 at a terrific price, and placed an order for one package. Once we received the R5032 package, and started considering how we could mount the LED strip(s) we decided we would like to mount the light strips in a trough near the ceiling and use them to provide indirect lighting for the room. The two 5 meter LED strips would allow us to place lighting along two walls of the sunroom. Not being able to decide which two walls should carry the lights, it seemed to make more sense to place the lighting all the way around the room so we considered ordering a second R5032. This would mean that we would have two controllers, and two IR receivers possibly placed in two different locations in the room. The LED strips come with connectors on both ends making it seem like they could be connected in series, but this is not supported by Daybetter. The controller has two separate leads each of which connects to one of the 5 meter LED strips. Connecting both LED strips in series to one of the controller power leads would burn out the controller. In order to place both IR receivers in the same location, but have one of these controllers control lights that were 5 meters away, we needed extension cables that would allow power from one controller to run to a LED strip 5 meters away. I contacted Daybetter customer support to ask if they sold such extension cables. The next day I received an email that said they did not carry any such cables, but they did provide a link to a company that sold such cables through Amazon, and they were willing to help offset the cost of the cables. Thanks to this quick response, I ordered a second R5032 package from Daybetter, and a set of 4 four-conductor 3 meter extension cables from HUALAND. Connecting two of the extension cables together gave me enough length to reach an LED strip 5 meters away. The next issue became how to build a trough in which the LED stips could be mounted. I found a solution at my local Lowes where I discovered a vinyl door edge that was a bit larger than the 0.5 inch width and height needed to conceal the LED strip. The size was perfect (UnmountedTrough.jpg), and the price was a tenth of what wood trim would cost to cover the same length. Since the trough was vinyl, I needed to insure that the LED strips did not generate enough heat to melt them so I laid out the LED strips and turned them on to full brightness to evaluate the amount of heat generated by the circuitry on the strip. The heat through the resistors on the LED strip was barely detectable. I painted the door edge trough and installed it at the bottom edge of a 1 x 2 trim piece that already went around the room (Trough+IRsensors.jpg). I ended up installing the LED strip along the back edge of the trough rather than the bottom of the trough because I did not think the horizontally oriented LED strip would bend nicely around 90 degree corners (LEDinTrough.jpg). Bending a vertically oriented LED strip around the room's 90 degree corners was no problem. Once the trough and the LED strips were installed, I then needed to place two power packs and two controllers somewhere hopefully out of sight. An attic is directly above the sunroom so I decided to drill a hole in one corner of the sunroom ceiling, and route the 4 conductor power cables through the hole into the ceiling where the two power packs and the two controllers would be mounted. The power pack cords were long enough to allow them to be installed almost anywhere convenient in the attic (PowerPacks+Controllers). The two controller modules had to be installed right next to the hole in the attic floor so that the IR receiver cables could pass through the hole and be aimed out to the center of the sunroom (Trough+IRsensors.jpg). One remote control sends a command that is received by both controllers so all light strings react in unison. The results are highly satisfactory as I hope can be seen from some of the included pictures (LEDsunroom1-7.jpg). The light strips provide a wide range of colors at about 5 intensity levels, and the adhesive backing made mounting in the trough super simple. The product works great for us, and the customer support was outstanding.

5.0 out of 5 stars
By Jason Diaz - Reviewed in the United States on February 17, 2020
Please Read*** DayBetter Detailed Review
So I just purchased these lights and so far so good. I had another set by another company that was a little bit thicker and the adhesive wasn’t as strong so kudos to DayBetter. First off I want to start with unboxing and work my way through. Also from my video keep in mind I have 4 strips across. The two that came in one box covered from my light switch all the way to the middle of my tv. The rest of the door and the wall above my window was done with two more strips and 3 connectors. Unboxing: The box is pretty small but both strips of lights are rolled up inside neatly. They leave a little extra slack on the end of the 3M adhesive so you can start it easily with out having to pick at the beginning or cut anything. The 12v AC/DC adapter comes with this as well as the RGB control box with two connectors and the IR Receiver. Application: I tested all strands of lights out and they worked perfectly fine. The reason I said 4 stars on brightness is because I haven’t seen them all at night yet (only saw two strips not 4. Will update afterwards.) the 3M tape on the back of the lights peels off with ease. When applying make sure you have your lights lined up the way you’d like them because the tape is pretty strong. Besides that the lights go on fairly easy and I don’t think falling off will be an issue at all with these. Display: The colors all function properly and are quite vibrant. I still don’t know how to work the custom feature yet but I’m sure someone does or will figure it out. I’m pretty content on the colors already provided. Connecting: So like I said I have 4 strips on here. I had to use three connectors total but it doesn’t weaken the power or dim the lights at all. I bought them on amazon as well and the product name is “ TronicsPros 10pcs 4 Pin Solderless Waterproof LED Strip to Strip Connector RGB Flex LED Ribbon LED Rope LED Tape Light Gapless Adapter for 10mm Wide Waterproof SMD 5050 RGB Flexible LED Strip Light”. I had to flip them upside down I guess to get them to touch the GRB strip. Make sure that they are on the same way otherwise you may get two different colors. To open them I just used a mini flat head and gave it a light twist and the opened with ease! I’ve added pictures here and if you have any questions please feel free to reach out!

5.0 out of 5 stars
By Tara N.Noe - Reviewed in the United States on March 14, 2020
These lights are worth it!
These lights are awesome! They came super fast!! And we’re exactly what my daughter wanted! Of course she wanted them to be like all of the people on TikTok 🤣 and theses lights did not disappoint!! We actually had to order 2 boxes to complete her whole room but these are great!! Would highly recommend!

5.0 out of 5 stars
By Nat - Reviewed in the United States on January 15, 2020
Fantastic, Durable LED Strips & Only Non-Waterproof Connectors Work!
So happy that I took the time to compare all the products to determine which is the best LED strip lights out there, and this is without the doubt the best one! It sticks well to the wall. If you need to adjust after you already applied it, you just peel the strips off slowly (so that the paint doesn't come off), and reapply it where you want it! I do want to point out something that would be helpful for y'all. -- If you're looking for connectors to connect separate strips, DAYBETTER suggests "5050 4Pin Non-Waterproof RGB LED Strip Connector Kit includes 2 x Female Connector Wire, 2x L Connector Cable, 3x L Shape Connectors, 3x gapless Connector, 10x LED strip light clip,5x 4-pin Male Conne " on Amazon! Do not purchase these connectors "TronicsPros 10pcs 4 Pin Solderless Waterproof LED Strip to Strip Connector RGB Flex LED Ribbon LED Rope LED Tape Light Gapless Adapter for 10mm Wide Waterproof SMD 5050 RGB Flexible LED Strip Light" that is seen as "Frequently Bought Together" with DAYBETTER LED strips. These waterproof connectors don't work as they aren't compatible with non-waterproof LED strips.

Recent Reviews


5.0 out of 5 stars
By Stephen L. - Reviewed in the United States on November 8, 2019
Works as described...Support is terrific!
My wife and I recently had a screened porch converted to a sunroom, and my wife wanted to add some sort of mood/celebratory lighting. After considering a number of options, we found the Daybetter R5032 at a terrific price, and placed an order for one package. Once we received the R5032 package, and started considering how we could mount the LED strip(s) we decided we would like to mount the light strips in a trough near the ceiling and use them to provide indirect lighting for the room. The two 5 meter LED strips would allow us to place lighting along two walls of the sunroom. Not being able to decide which two walls should carry the lights, it seemed to make more sense to place the lighting all the way around the room so we considered ordering a second R5032. This would mean that we would have two controllers, and two IR receivers possibly placed in two different locations in the room. The LED strips come with connectors on both ends making it seem like they could be connected in series, but this is not supported by Daybetter. The controller has two separate leads each of which connects to one of the 5 meter LED strips. Connecting both LED strips in series to one of the controller power leads would burn out the controller. In order to place both IR receivers in the same location, but have one of these controllers control lights that were 5 meters away, we needed extension cables that would allow power from one controller to run to a LED strip 5 meters away. I contacted Daybetter customer support to ask if they sold such extension cables. The next day I received an email that said they did not carry any such cables, but they did provide a link to a company that sold such cables through Amazon, and they were willing to help offset the cost of the cables. Thanks to this quick response, I ordered a second R5032 package from Daybetter, and a set of 4 four-conductor 3 meter extension cables from HUALAND. Connecting two of the extension cables together gave me enough length to reach an LED strip 5 meters away. The next issue became how to build a trough in which the LED stips could be mounted. I found a solution at my local Lowes where I discovered a vinyl door edge that was a bit larger than the 0.5 inch width and height needed to conceal the LED strip. The size was perfect (UnmountedTrough.jpg), and the price was a tenth of what wood trim would cost to cover the same length. Since the trough was vinyl, I needed to insure that the LED strips did not generate enough heat to melt them so I laid out the LED strips and turned them on to full brightness to evaluate the amount of heat generated by the circuitry on the strip. The heat through the resistors on the LED strip was barely detectable. I painted the door edge trough and installed it at the bottom edge of a 1 x 2 trim piece that already went around the room (Trough+IRsensors.jpg). I ended up installing the LED strip along the back edge of the trough rather than the bottom of the trough because I did not think the horizontally oriented LED strip would bend nicely around 90 degree corners (LEDinTrough.jpg). Bending a vertically oriented LED strip around the room's 90 degree corners was no problem. Once the trough and the LED strips were installed, I then needed to place two power packs and two controllers somewhere hopefully out of sight. An attic is directly above the sunroom so I decided to drill a hole in one corner of the sunroom ceiling, and route the 4 conductor power cables through the hole into the ceiling where the two power packs and the two controllers would be mounted. The power pack cords were long enough to allow them to be installed almost anywhere convenient in the attic (PowerPacks+Controllers). The two controller modules had to be installed right next to the hole in the attic floor so that the IR receiver cables could pass through the hole and be aimed out to the center of the sunroom (Trough+IRsensors.jpg). One remote control sends a command that is received by both controllers so all light strings react in unison. The results are highly satisfactory as I hope can be seen from some of the included pictures (LEDsunroom1-7.jpg). The light strips provide a wide range of colors at about 5 intensity levels, and the adhesive backing made mounting in the trough super simple. The product works great for us, and the customer support was outstanding.

5.0 out of 5 stars
By Jason Diaz - Reviewed in the United States on February 17, 2020
Please Read*** DayBetter Detailed Review
So I just purchased these lights and so far so good. I had another set by another company that was a little bit thicker and the adhesive wasn’t as strong so kudos to DayBetter. First off I want to start with unboxing and work my way through. Also from my video keep in mind I have 4 strips across. The two that came in one box covered from my light switch all the way to the middle of my tv. The rest of the door and the wall above my window was done with two more strips and 3 connectors. Unboxing: The box is pretty small but both strips of lights are rolled up inside neatly. They leave a little extra slack on the end of the 3M adhesive so you can start it easily with out having to pick at the beginning or cut anything. The 12v AC/DC adapter comes with this as well as the RGB control box with two connectors and the IR Receiver. Application: I tested all strands of lights out and they worked perfectly fine. The reason I said 4 stars on brightness is because I haven’t seen them all at night yet (only saw two strips not 4. Will update afterwards.) the 3M tape on the back of the lights peels off with ease. When applying make sure you have your lights lined up the way you’d like them because the tape is pretty strong. Besides that the lights go on fairly easy and I don’t think falling off will be an issue at all with these. Display: The colors all function properly and are quite vibrant. I still don’t know how to work the custom feature yet but I’m sure someone does or will figure it out. I’m pretty content on the colors already provided. Connecting: So like I said I have 4 strips on here. I had to use three connectors total but it doesn’t weaken the power or dim the lights at all. I bought them on amazon as well and the product name is “ TronicsPros 10pcs 4 Pin Solderless Waterproof LED Strip to Strip Connector RGB Flex LED Ribbon LED Rope LED Tape Light Gapless Adapter for 10mm Wide Waterproof SMD 5050 RGB Flexible LED Strip Light”. I had to flip them upside down I guess to get them to touch the GRB strip. Make sure that they are on the same way otherwise you may get two different colors. To open them I just used a mini flat head and gave it a light twist and the opened with ease! I’ve added pictures here and if you have any questions please feel free to reach out!

5.0 out of 5 stars
By Tara N.Noe - Reviewed in the United States on March 14, 2020
These lights are worth it!
These lights are awesome! They came super fast!! And we’re exactly what my daughter wanted! Of course she wanted them to be like all of the people on TikTok 🤣 and theses lights did not disappoint!! We actually had to order 2 boxes to complete her whole room but these are great!! Would highly recommend!

5.0 out of 5 stars
By Nat - Reviewed in the United States on January 15, 2020
Fantastic, Durable LED Strips & Only Non-Waterproof Connectors Work!
So happy that I took the time to compare all the products to determine which is the best LED strip lights out there, and this is without the doubt the best one! It sticks well to the wall. If you need to adjust after you already applied it, you just peel the strips off slowly (so that the paint doesn't come off), and reapply it where you want it! I do want to point out something that would be helpful for y'all. -- If you're looking for connectors to connect separate strips, DAYBETTER suggests "5050 4Pin Non-Waterproof RGB LED Strip Connector Kit includes 2 x Female Connector Wire, 2x L Connector Cable, 3x L Shape Connectors, 3x gapless Connector, 10x LED strip light clip,5x 4-pin Male Conne " on Amazon! Do not purchase these connectors "TronicsPros 10pcs 4 Pin Solderless Waterproof LED Strip to Strip Connector RGB Flex LED Ribbon LED Rope LED Tape Light Gapless Adapter for 10mm Wide Waterproof SMD 5050 RGB Flexible LED Strip Light" that is seen as "Frequently Bought Together" with DAYBETTER LED strips. These waterproof connectors don't work as they aren't compatible with non-waterproof LED strips.