Search  for anything...
Bora

BORA Portamate PM-4000 - Heavy Duty Folding Miter Saw Stand with Quick Attach Tool Mounting Bars Orange 44 x 10 x 6.5 inches

    • Based on 2,924 reviews
Condition: New
Checking for product changes
$79.99 Why this price?
Save $19.01 was $99.00

Buy Now, Pay Later

As low as $13.33 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

Eligible for Return, Refund or Replacement within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Friday, May 10
Order within 16 hours and 41 minutes
Available payment plans shown during checkout

Features

  • A cut above - The Bora Portamate PM-4000 is the best, most practical, hassle-free stand youll find for miter saws or chop saws. Constructed of tubular steel with a powder-coated finish, This rugged yet lightweight saw stand can support up to 500 lbs. And is compatible with Miter saws up to 12 inches, including compound sliding saws.
  • Cut out for convenience - setup is quick and simple, as the folding legs swing Under the center portion and are secured by pins that snap into position. Stand folds up for easy transport, storage and carrying from your vehicle to the worksite. Folded size is 43. 5" W x 20" D x 6. 5" H and Weighs only 30 lbs. Without a saw.
  • Switch gears & mount add tools - quick-attach saw mounts allow for easy mounting of your saw, as well as other tools which you can switch around, set up and take down quickly hardware is included. Additional mount sets sold separately offer a wider variety of tools that you can use with your PM-4000 stand.
  • Makes the cut our PM-4000 saw stand was specially designed to provide the ideal ergonomic working height of 36 inches, so professional contractors and day's can work safely and comfortably while making cuts with absolute precision and secure stability.

Description

If you have a miter saw, then the PM-4000 folding miter saw stand is exactly what you need. Designed to work with nearly every make and model miter saw or chop saw, this strong, stable stand will allow you to setup wherever you wish – quickly, easily, and safely. Whether it’s a jobsite or your driveway, you’ll appreciate being able to work exactly where you need to. This is a contractor grade miter saw stand, but priced for the homeowner. But don’t let the low cost fool you – this is a high quality piece of equipment, with tubular steel construction, and a whopping 500lb capacity, so you can handle the big jobs with ease. The quick attach mounts make attaching and detaching the saw simple, and the adjustable 13” tall material supports can be in or out to support material ten feet long. But here’s the kicker – it’s not only lightweight, but it folds up for easy transport and storage, making this one of the most versatile miter saw stands on the market. An optional Wheel Kit is available (PM-7004) for added mobility, and extra tool mounts (PM-7002 – 20-in long and can be adjusted along the width to fit most saws) are also available allowing you to expand the use of your stand to other tools in your shop.

Color: Orange


Material: Steel


Brand: Bora


Item Weight: 27.22 Pounds


Finish Type: Powder Coated


Manufacturer: ‎Affinity Tool Works


Part Number: ‎PM-4000


Item Weight: ‎27.2 pounds


Country of Origin: ‎USA


Item model number: ‎PM-4000


Is Discontinued By Manufacturer: ‎No


Size: ‎44 x 10 x 6.5 inches


Color: ‎Orange


Finish: ‎Powder Coated


Material: ‎Steel


Power Source: ‎Crank


Item Package Quantity: ‎1


Usage: ‎Professional


Included Components: ‎PM-4000


Batteries Included?: ‎No


Batteries Required?: ‎No


Warranty Description: ‎1 YEAR


Date First Available: October 20, 2010


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Friday, May 10

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Klarna Pay in 4
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Great stand for the weekend warrior/DIYer.
I needed a stand for my 12" CS Miter saw. I am a homeowner/ DIYer so it isn't going to be getting use on a daily basis or on a job site. With that being said, I have been contemplating buying this stand for a few weeks now and when amazon dropped the price I pulled the trigger (under $65), for that price I didn't really expect much out of this stand. First impression was with the package, obviously. It came in its own packaging as amazon did not bother to place it in one of its own boxes, so I was a little worried when I was going to open it, as one side of the package was slightly open. To my surprise there was no damage and all the parts were present and intact. Unpacking the stand took a few seconds and the base and legs are already put together and just need to be opened and placed in the opened and locked position. This is done by a swinging the legs outward and by a self locking/retracting pin, very easy to do. (One other reviewer did mention that when closing the stand the legs have to be closed in the same order they are opened, good tip he said was label them which two go first). The directions given are the not best written but the rest of the pieces are pretty self explanatory to put together. It comes with the end extension bars which are not rollers just round lightweight aluminum. The only part that took a little extra time was mounting it to the support arms and locking it in place. It does come with bolts to mount the saw to the mounting arms and it gives a few set ups, each set up being a different bolt length. It also comes with small displacement mounting bars for saws that have unusual mounting holes, (mines didn't, but I did read that some people did use this feature). To adjust the supports arms outward or up and down it comes with plastic knobs that are screwed into the stand to loosen or tighten the support arms to adjust them according to each use. I don't know how long those will last as I dropped one on initial install, it was fine but I don't think it can take too many of those drops before it would break or crack. Once I had the saw mounted to the support arms, I moved the saw over to the stand and locked it in place and I have to say it was pretty tight and sturdy on there. I also have to mention the legs do have grommets on the bottom of the them that are made to level the stand and are pitched on an angle to add to the support of the legs/base. I will most likely leave the saw mounted on the stand as I have enough room in my garage to allocate for this, so it will not be getting that much movement unless I am working outside, but I don't think it will be a problem as the stand is relatively light weight and the saw can be transported as shown in the pictures with the mounting bars. I did get to use it this past weekend for a work bench I am building and the stand performed very well. I cut 2x4x8', 4x4x8' and 2x10x10', each cut I adjusted the supports to what I needed and they performed great. They did sag a little bit when fully extended but not to the point that it affected performance of the cut and also all you have to do is adjust the height of the end supports and problem solved. Height of the stand for me was right on (I am about 6' tall) and made each cut relatively easy. For me the stand performed well above my expectations. As others have stated if you need it for everyday use on a job-site or will give it very heavy use, I also do not think it will last that long. but if you're a homeowner or DIYer do not hesitate to pick this up you will not be disappointed. I will update my review later on to see how it lasts for the long haul or for the use I will need it for. ... show more
Reviewed in the United States on February 3, 2014 by Young NYer 10
    • Stable and well built
This mitre stand is simple but very useful. It is easy to assemble and is well built. I was able to replace a large table top and save space using the Bora stand instead. Plus, it is portable and foldable. It was easy to setup stop blocks on the frame using scrap 2x4s and clamps. I am very pleased with this purchase. A great price too! ... show more
Reviewed in the United States on October 16, 2023 by RB
    • Darn near perfect, probably is for the cost.
Honestly this should probably be a five star but as a 6 ft individual I find it a hair high for me personally. It’s very sturdy, easy to assemble, it folds down to a perfect totable size. For the price you won’t beat this saw stand. I got tired of fighting with the feet of my bigger name brand one that cost 4 times as much so I figured I would give this a go. They could easily charge another 40 for this and even that price point would seem reasonable for this quality. The height thing again is something I overlooked, if this was 3 inches shorter I would have 5 stars. Great product and I will definitely try more in their line. ... show more
Reviewed in the United States on March 15, 2024 by Just another Carpenter
    • love this stand
Got a new 12" miter saw and wanted a worth stand - this one is great. Easy to assemble, very sturdy, the extension bars are terrific and offer support for wood at least 14' long. It is a bit heavy, but well worth it for the job it does and the price.
Reviewed in the United States on March 9, 2024 by Alan M
    • Great value!
Easy to assemble, surprisingly functional and sturdy. Very good price compared to others we considered.
Reviewed in the United States on February 21, 2024 by Paul
    • Make sure to use the mounting bolts the right way up!
I've been looking for a cheap, sturdy, no frills miter saw stand for a month or so. I finally pulled the trigger on this Bora after I got tired of my DeWalt DW-780 miter saw sitting on the floor all the time. I can now store my shop vac and some other stuff underneath this and reclaim a little space. Overall, after unboxing and minor assembly, the quality of this seems above-average for what I would expect at this price point. Okay, so I would have liked wheels, but I'd rather decent quality and pay less and add my own wheels later, so this suits me well. Small niggles - the paint is reasonably thin, and once you install your saw, tightening the screws down will probably scrape through the paint. I also imagine it will chip off with time if moved frequently. However, the general sturdiness and function is decent, so I'm not going to complain. Also, one of the support arms doesn't quite fit into the main rail it is stored in. I'm fairly sure if I get a rasp and file the swarf or solder spatter off the inside of the tube, it will slide in like the first one did. Also, before installing the saw, the legs weren't quite all flat on the floor. With the weight of the saw on top of this all evened out. I may yet make some screw-out leveling leveling feet to fit inside the tube legs, but that's a project for another day. Things I like: - Price - Sturdines - the way the legs swing out for a larger footprint when down, yet come back up in line with the thinner saw mounting rails. - The support arms are almost un-noticeable once stowed yet give you a good six-ish extra feet of wingspan to support whatever you are cutting. Really useful when working on your own - The mounting hardware includes three different lengths of bolts to accommodate different thicknesses of miter saw bed. - Instructions are clear, and printed in well written English. With pictures. The first time I fitted the saw to the mounting rails, I mounted the saw too far forward, and had to loosen all the bolts and slide it backwards. There is some tomfoolery involved in getting the bolts clear of the clips and handles underneath. Or least, there is when you use the upside down. I didn't cotton onto the square shoulder underneath the head to begin with. It was only after my second fitting of the saw, I looked at the instructions and realized they needed to be the other way up such that the square shoulder lined up with the square cutout in the mounting rails. *Sigh*. Having written this review, I can now go and remove them all, and reinstall them the correct way up. If I'd done it the right way the first time I also wouldn't have needed to cut one down with the grinder. Hopefully this will save someone else from making the same mistake! Overall, I think this is a good buy for the price. Maybe when I get a proper shop I will graduate to a fancier setup with built in dust collection, but for my current apartment setup, this will suffice. ... show more
Reviewed in the United States on July 14, 2018 by Compass
    • It was better than expected
I got this for my 12" miter saw and was pleased with how sturdy it was for the price. Works well and makes cutting trim a lot easier. The unit is not too heavy and fairly versatile as it will un hook from stand and be used on a table top with out having to remove bolts. Totally happy
Reviewed in the United States on February 14, 2024 by Quinn

Can't find a product?

Find it on Amazon first, then paste the link below.