bestarc Plasma Cutter, [Pilot Arc] [Large LED Display] [Air Sensor] 80A bestarc Plasma Cutter Machine 110/220V Dual Voltage, 7/8 Inch Clean Cut 1.38 Inch Max Cut, Post Flow 2T/4T for Beginners DIY
Condition: New
Notify me when this product is back in stock
Buy Now, Pay Later
As low as
/ mo
Learn more
- – Up to 36-month term if approved
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
Unavailable
Recently Viewed
Style: BTC800DP 9GEN 110/220
Features
- [Powerful Cutting Ability] Dual voltage 110/220V good for home, workshop and hardware shop use. Professional performance 7/8 clean cuts on Iron, Steel aluminum and copper with Inverter IGBT Technology. Very powerful for DIY and heavy duty project. The Maximum cutting thickness is recommended to 18mm@40A 110V 50PSI; 35mm@80A 220V 65PSI. Dry and compressed air is required. Power breaker up to 60A@110V 35A; Up to 50A@220V 50A.
- [Pilot Arc]: bestarc plasma cutter with the pilot arc function. It is a high-frequency non-touch arc starting mode. The torch head does not need to touch the metal plate, making it effective on rusted, painted, or dirty metal surfaces. Adjustable PA function for extended pilot arc duration, reduced energy consumption in non-cutting work, reduced electrode burning, and extended consumables cutting life.
- [Air Sensor Technology]: The air sensor built in machine displays air pressure on front panel of the machine. Users can adjust the air pressure manually through the air regulator (air pressure cannot be automatically adjusted). Air filter is installed in the machine, equipped with a quick-connect 1/4 NPT air connector, ready for use right out of the box. Once connected to an air compressor, the recommended air pressure should be within 70PSI, with a flow rate of 250 liters per minute. Note: The compressor needs to be purchased separately.
- [LED Screen Display]: The screen centrally displays parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If the plasma cutter cannot work, the screen comes with an error code, making it easy to find out the problems.
- [2T/4T/PA/PT Function]: Post time adjustable from 3-15s to cool the torch. Adjust the cooling time of the torch head to extend the service life of consumables. We recommend a cooling time of 4-8 seconds. The PA function allows pilot arc timing adjustment up to 15s; longer times are ideal for mesh cutting, shorter times help extend consumable life. 2T/4T automatic cutting release your finger.2T is a semi-automatic cutting control, and 4T is an automatic cutting control.
Manufacturer: bestarc
Part Number: BTC800DP-9GEN-1122
Item Weight: 41.5 pounds
Product Dimensions: 7.72 x 13.7 x 18.11 inches
Item model number: BTC800DP-9GEN-1122
Size: 80A
Color: Cyan
Style: BTC800DP 9GEN 110/220
Material: iron
Power Source: ac
Voltage: 110220 Volts (AC)
Wattage: 12000 watts
Included Components: 35mm Max cutting thickness @220V 70PSI, 80Amps Pilot Arc Plasma cutting torch, Portable, Built-in Regulator, Air sensor, Set up within 1 min, Easy to use, Powerful performance
Batteries Included?: No
Batteries Required?: No
Date First Available: March 13, 2024
Frequently asked questions
This product is currently out of stock. Please check back later for shipping info.
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Style: BTC500DP 8GEN 110/220
This machine is awesome! Works like a champ and cuts cleanly, quickly, and accurately. Great value, great product!
Reviewed in the United States on November 26, 2025 by B Stan
This is a great non-touch plasma torch. The design makes it easy to set up all cutting parameters. It’s lightweight, with all external connections done without tools. It’s equipped with an air dryer, which should extend the torch expendable parts life. All controls are on the front panel, easily set and read, except for on/off switch. It can be flipped on or off from the front, once you know it’s located. I’ve cut metal with for years but I’m a first time plasma user. I quickly cut various thickness and conditions of steel, and found it intuitive how to set up the pressure and current. There’s a chart with recommendations, but I found thinner metal below 3/8” could be cut cleanly and quickly with the same setting. All you need to do is cut at the best rate, and that’s learned quickly within the first inch of cutting. I did find it more difficult to punch a hole through thicker metal with plasma than Oxy-acetylene (3/8” and thicker), but the thinner metal was as easy as Oxy-acetylene. I’m sure when I developed the proper technique, the thicker gauge metal will punch easily. I felt so confident after 15 minutes of playing with my new torch, I started and finished two projects I’d been waiting to do because my acetylene bottle was empty. With plasma; all you need is an air compressor, and electricity. And this unit will work on 110 or 220, and both have a 50% duty cycle. For my two projects I was cutting with 220, and it cut both 7/16 and 16 gauge quickly and cleanly by only changing air pressure and current. With Oxy-acetylene I would have had to change tips and played with torch settings and pressures as well. Plasma is so much easier, with no expense of gas, and bulk of the torch and hoses. I’ll never go back! If anyone that reads this wants to buy an Oxy-acetylene system lock-stock-and barrel call me;-).
...
show more
Reviewed in the United States on April 14, 2025 by Chip
Works as advertised. Works on 120 volt and 240 volt which is nice. Very portable. Cuts very well.
Reviewed in the United States on February 9, 2026 by Amazon Customer
For an inexpensive entry level plasma cutter, this is pretty great. Now I will say, it is great as far as it's cutting capabilities and ease of use (and boy do I use it). There are a few reasons for 4 starts and not 5 though. 1. The handle part feels a bit cheap. Still, if you are just a small shop who needs to cut metal on occasion or a weekend warrior like myself, it'll do. If you are a shop doing a lot of metal fabrication, maybe spend a few bucks more on something more durable. 2. It claims to work with a small pancake compressor. I set this up immediately and yes, it does work, however a small pancake compressor is only good for small cuts with breaks in-between for the compressor to refill. I found that to maintain 45 PSI for what I was cutting, I has to set the compressor to 60 PSI and it ran out pretty fast. I changed to my slightly bigger 3 gal Harbor Freight compressor and it was waaaayyy better with the ability to cut for longer periods at a time. Just think of how long each blast will be and make sure you have a compressor that can keep up. For small holes and cuts, the pancake is probably ok. For larger cuts or long use cuts, bigger is better. 3. It can run on 110, but... you know. So I hooked it up to a regular 110 outlet and it worked great for light gauge metal. I worked my way up and by the time I got to lawnmower blades, it started having some issues keeping up. I switched to my 220 outlet and BAM!!!... it cut like a hot plasma knife through butter. Overall, know the application you will be using it for and make sure you have a setup that can accommodate. As long as you have the right power and air for the job you are doing, I have not had any issues with this thing keeping up. If you have been thinking of playing with plasma cutting but are on a budget and don't want to worry about gases and stuff, this is a great option.
...
show more
Reviewed in the United States on January 10, 2026 by Will-Yum
Fantastic little machine! Never owned a Plasma Cutter in my life, until this one. Have been greatly impressed by this unit!
Reviewed in the United States on February 1, 2026 by RickN
This thing works just fine for the few times I have used it. Pretty nice for the price.
Reviewed in the United States on January 7, 2026 by Sam
Let me start by saying I bought this with my.own money. About 20 years ago, I worked in a welding fabrication shop. They had a plasma cutter back then. It cost probably 10 to 20 times what this machine cost and it didn't work nearly as good as this bestarc. Technology has improved tremendously in 20 years. Obviously. I had no idea that such a quality machine could be bought for so little money nowadays. I am no longer a professional fabricator, an amateur at best nowadays. Even so, I was able to put this cutter together and start cutting in minutes. Just hook up the lines and power and air. I didn't even have to mess with the settings much. If it didn't cut I just turned up the air and amps and voila, it cut great. I bought this for one job of installing floor pans in an old jeep and I am really glad I did. It was literally like taking a magic pencil and drawing a cut line on the pan and it just falling out. It was much easier than any other method of cutting. It made trimming the new pan easy as well. If I needed a hole, forget the drill, I just started the arc up and plunged cut a hole. The floor pans where very thin, like 20 gauge so they were easy for this machine to cut. I tried some 1/4 inch plate and had great results as well with a 220v power supply. I wish I would have bought one of these years ago and gave my oxy-acetalyne torch away. This plasma cutter is better in every way as long as you have power. I love it, buy it, you won't regret it. Oh and I didn't even mess one tip up while using it on this job. That says a lot to it design and durability.
...
show more
Reviewed in the United States on November 2, 2023 by roger slone roger slone