Search  for anything...
bayite

bayite 12V DC Water Transfer Pump with 2 Hose Clamps 12 Volt Diaphragm Pump Self Priming Sprayer Pump with Pressure Switch 4.5 L/Min 1.2 GPM 80 PSI Adjustable for Weed ATV Marine Boat

    • Based on 3,739 reviews
Condition: New
Checking for product changes
$29.99 Why this price?
Save $3.00 was $32.99

Buy Now, Pay Later

As low as $7 / mo
  • – 4-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Tuesday, May 21
Order within 2 hours and 26 minutes
Available payment plans shown during checkout

Recently Viewed

Features

  • The patented design delivers smooth & consistent flow at all ranges of operation, while drawing low current
  • Inlet and Outlet: 3/8-inch hose barb ports. Vertical Suction Lift: 6.6ft (2m). Adjustable CUT-OFF Pressure: Default 80-85PSI, MAX 100 PSI(5.5Bar). It doesn't mean 4.5L/min jet at 100PSI. Comes with 2 tube clamps
  • The pump body is sealed to prevent incidental moisture and dust from entering. The pump can not run continuously more than 6 hours. Able to operate in a wet environment. Self priming function allows it to be mounted above water tank
  • Sealed switches and electro coating to inhibit corrosion. Soft rubber mounting tabs to reduce vibrations. When installed correctly, Marine Duty Fresh Water Pumps provide years of quiet operation
  • The pump in combination with a low backpressure water system can exceed all expectations

Brand: ‎Bayite


Color: ‎Black(3/8'' Inlet/Outlet)


Material: ‎Plastic


Style: ‎12V DC Sprayer Pump


Power Source: ‎12V DC (60W)


Item Weight: ‎400 Grams


Maximum Flow Rate: ‎4.5 Liters Per Minute


Maximum Lifting Height: ‎6.6 Feet


Voltage: ‎12 Volts (DC)


Product Dimensions: ‎6.5"L x 4"W x 2.2"H


Manufacturer: ‎bayite


Part Number: ‎BYT-7A108


Item Weight: ‎14.1 ounces


Country of Origin: ‎China


Item model number: ‎BYT-7A108


Is Discontinued By Manufacturer: ‎No


Size: ‎3/8 inch Inlet/Outlet


Batteries Included?: ‎No


Batteries Required?: ‎No


Warranty Description: ‎1-Year Warranty from purchase date. FREE replacement or full refund.


Date First Available: August 8, 2017


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Tuesday, May 21

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • It works
Made in China so its throw away. So far works ok
Reviewed in the United States on June 9, 2023 by glen
    • Perfect for homemade camping shower/small job utility hose in the winter.
Review Image by Prof Daddy Prof Daddy
Review Image by Prof Daddy Prof Daddy
Review Image by Prof Daddy Prof Daddy
Review Image by Prof Daddy Prof Daddy
Review Image by Prof Daddy Prof Daddy
Review Image by Prof Daddy Prof Daddy
Review Image by Prof Daddy Prof Daddy
Review Image by Prof Daddy Prof Daddy
Review Image by Prof Daddy Prof Daddy
Review Image by Prof Daddy Prof Daddy
I was going to buy one of those battery powered camping showers but they all seemed to have issues so I bought this and made my own. It is killa. The water pressure is fantastic. The shower is pretty close to my home shower in terms of water pressure. I bought this pump (it comes with two hose clamps), a Home Depot bucket with lid, 10 feet of 1/2 inch reinforced vinyl hose (clear vinyl hose is cheaper but only has working pressure of 20 psi), a kes shutoff valve (has to shut water off completely to work properly otherwise the pump will stutter/keep coming on and shutting off immediately to keep up water pressure), 10 feet of Landscape wire 16/2 AWG, an in line rocker switch (I put the switch in just in case of a temporary leak so I could shut off the pump) from Lowe's. I used a set of alligator clamps which are fused (had these from Yuasa battery maintainer (but you can buy them separately on Amazon). I drilled a 3/4 inch hole in the lid (near the edge of the lid). I used a Forstner bit so it cut a nice neat hole (but spade bit would work as well) so that the suction hose can go through to the bottom of the bucket. Lid will keep debris out of the shower water as well as hold the pump. I screwed the pump to the lid. To make the wire harness to clip to my truck battery (you might be able to use cigarette lighter/accessory plug but those might be too wimpy so I didn't want to chance it. I decided to go straight to the battery for power. I used a hand held shower head I already had which had a 5 foot hose adding length to the roughly 8 feet of reinforced vinyl output hose (cut off about 2 feet for the suction hose). I read that people had trouble keeping this reinforced vinyl hose from leaking even cranking on the hose clamps. I used a heat gun on low 600 watts to heat up (not burn) the hose before slipping it on the hose barbs then clamped it down while it was still warm. It seals really well when it has been heated so it's soft. No issues with leaking. I think it must form fit around the barbs because it still spins but doesn't leak at all. You will hear it if there are any leaks. The pump will make quite a racket shutting on and off. It reminds me of anti-lock brakes when they go off. It is pretty quiet when working properly. I bought several adapters for the shower head end of the hose. I bought 3/8" hose barb to 1/2" MIP (male straight pipe thread). The hand held shower hose has it's own gasket and screws on to this fitting. To be able to use a regular garden hose nozzle for washing vehicle, dogs, etc., you can get either 1/2" FIP to 3/4" garden hose adaptor to attach to the end of the reinforced vinyl hose (might need Teflon tape to seal these threads) or if you want to just remove the hand held shower head (which has its own gasket) you can use a 1/2" MIP (threads into the hand held shower hose) to 3/4" garden hose. This would give you longer hose and no possibility of needing to use Teflon tape every time you attach a hose nozzle adapter. I soldered and sealed the wire connections with Marine heatshrink (it has epoxy glue which melts and makes completely waterproof seal. If you look closely at the close up of the wire connections you can see the epoxy glue oozing out around the wires) all the wire connections. I could have soldered the alligator clamp assembly directly to the Landscape wire but I want to be able to use the alligator clamps for battery tenders if I need them. I guess I could also attach the ring assembly for a battery tender directly to my battery so I could just plug the flat 2 pin connector directly to my battery but then it would only work with my truck. With the alligator clips I can hook them to any 12 volt battery. I think just to be safe I will get an inline filter to go in the suction line in the bucket in case debris happens to get in there somehow. My plan is to keep bucket full of cold water, leaving it out in the sun tosee if sun warms it at all but remove a big pot of water and boil it, pouring it back into the bucket, for showering. The pump can handle water temperatures up to 140 degrees F. I have been using solar showers but even with pretty good sun, showering is an all day affair and rarely did I get more than a tepid shower if I was lucky. This will always provide a hot shower. FYI you really can't put boiling water in a solar shower. All in all I think this will be a better solution for car camping. I already used it to wash a scooter. It's still too cold to bring the hose out and leave it out. This was much easier. Filled the bucket in the shower with warm water, attached to a battery, and it couldn't have been simpler. 5 gallons of water was plenty. I don't know why this couldn't be used with a 12 volt transformer (as long it puts out more than 5 amps) for a temporary shower if there are plumbing issues. The pump draws 5 amps and produces 80-85 psi outputting 1 gallon a minute (no Hollywood showers). I am glad I didn't send a baby to buy the beer. I was going to get a 35 psi pump. This one puts out the perfect water pressure. ... show more
Reviewed in the United States on April 5, 2019 by Prof Daddy Prof Daddy
    • priming it is the only issue and once you do it, its good
works as advertised
Reviewed in the United States on May 22, 2023 by Scott Westin
    • Replacement
Off brand replacent to a fimco. Motor puts out more gpm than the factory one even though they say the same. Great product
Reviewed in the United States on September 14, 2023 by Amazon Customer
    • Pressure to high.
Works but pressure preset to 80 lb adjustment can be reduced to 60lb. Would be great at 40lb. Had to adjust hose clamps to stop leaks. Using for hunting shower so it's OK.
Reviewed in the United States on August 19, 2023 by rick
    • Easy to install
My Ironton sprayer pump die I purchase this pump fit perfect. Great pressure
Reviewed in the United States on September 11, 2023 by B. Edmund Rumrey
    • 12v Shower
We had a broken hot water pipe under our foundation, and no hot water for weeks. I bought this for a quick shower setup. This review is for the the 1.2 gal/m model. It's a diaphragm pump, of course it makes noise; volume increases with load. It's a lower frequency buzzing/vibrating sound which gets amplified if the pump is mounted on something that resonates. The actual noise volume is pretty low, but it drones and I can see how people might find it annoying. Mount it in a foam box and you can barely hear it. The feet are rubber, and mounted on a dovetail. They don't "break off" as other users posted. If they fall off, you just slide them back on. Good design. They help with damping the noise. The connectors do not leak. If they leak, it's because of incorrect usage or a defective unit. I used 3/8 medical grade silicone tubing for pickup and output, and a single zip tie on the output side; no clamp on the input side. Zero leaks. A zip tie worked because I had minimal pressure on the output side with a shower head. I tested with full pressure though by putting the shower head in trickle mode, and still no leaks. It handles shower temp water no problem - about 110 degrees F. Power usage depends on load. It draws less than 1 amp while showering - around 10 watts. Again, power usage increases with load, so you will see full power draw at full capacity. I am using this pump for a makeshift shower, as we have a major plumbing issue in hour house which will take weeks to fix. It's connected to a standard shower wand (a spare one I had), and I use a 12 gallon tank that sits in the far end of the tub. Power comes from a small-ish power bank through a 12v cigarette lighter plug and a waterproof switch. Works fantastic. Waaaay better than one of those battery powered camp showers, easily twice the flow and pressure, and gives you a "normal" shower experience using a normal shower head. ... show more
Reviewed in the United States on December 9, 2022 by welder314
    • PERFECT!
This was just what I needed, perfect fit and price. Would definitely buy this one again.
Reviewed in the United States on August 25, 2023 by Tarsha

Can't find a product?

Find it on Amazon first, then paste the link below.