That product is currently unavailable. Please try a different product or see this article for help.
Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle
Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle
Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle
Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle
Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle
Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle
Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle
Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle

Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle

Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle
Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle
Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle
Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle
Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle
Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle
Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle
Adam's UV Ceramic Paint Coating Kit - 9H Ceramic Coating 5+ Years Of Protection | Stronger Than Car Wax | Apply After Car Wash, Clay Bar, Car Polisher | Car Detailing Kit Boat RV Motorcycle
$159.50
$99.00 Why this price?
Checking for changes Product info up-to-date Product info updated We've detected that this product is out of stock. Enter your email below and we will notify you when it is available.
Buy Now, Pay Later
As low as $ / mo
- month term
- No impact on credit score
- Quick & easy checkout
- Legal stuff:
Promotional Offer
Estimations exclude tax, and assume no other Klarna balances. Non-promotional balances have a 19.99% APR and a $2 monthly minimum interest charge. Accounts are subject to credit approval, and issued by WebBank, member FDIC.

Free shipping on this product


Availability: In Stock
Fulfilled by Amazon


Get it by Sunday, Sep 27
Order within 6 hr 10 min

Features

  • ✅ THE MOST ADVANCED PAINT PROTECTION FOR YOUR VEHICLE! Adam’s Ceramic Paint Coating is a clear, nanocrystalline coating that protects your vehicle from weather, chemicals, and UV rays while repelling water, dirt and other contaminants. Providing 9H hardness, 5+ years of protection even in the harshest conditions.
  • ✅ PATENT PENDING UV TRACING TECHNOLOGY! Infused with patent-pending Ceramic Glow Technology. This feature acts as an application aid allowing users or professionals the ability to never miss a spot and make sure the coating is perfect every time you apply it!
  • ✅ ULTRA HIGH GLOSS! The key to the coatings unbeatable “shine” is in the preparation stage. You’ll want to wash, clay, and remove any contaminants from the paint before polishing the paint to perfection. Then using the provided Coating Prep, you can wipe the vehicle down to remove any waxes or sealants left behind! Next, you can apply the ceramic coating using 50/50 overlapping to ensure full coverage.
  • ✅ EXTREMELY HYDROPHOBIC! Adam's New Ceramic Paint Coating is a super durable barrier to protect paint from dirt and bonded contaminants, with outstanding water beading that makes water almost jump off the surface! This nano coating is safe on clear coat, single stage, vinyl wraps, and lacquer paint finishes and can minimize the chances of creating swirl marks and scratches while washing and drying.
  • ✅ 110% SATISFACTION GUARANTEE! Proudly crafted in the USA, this state of the art nano ceramic car coating kit is specially designed using the most advanced technologies available. We pride ourselves on customer service and satisfaction and believe that this is THE BEST Ceramic Paint Coating on the market! If you don’t agree, we’ll do everything we can to make it right.

Description

When looking at our 3 different offerings of coatings, it’s best to think of them in terms of thickness/ overall durability. Our Spray Coating and Wheel Coating are varying formulations of coatings, Wheel being the thicker of the two, but designed especially to hold up against the harshest elements. With Adam’s UV Ceramic Paint Coating, it’s the slickest and glossiest of the formulations to have the most premium form of protection for your paint. As with all of Adam’s Ceramic formulations, these products are tested to the harshest alkaline and acid conditions prior to any real-life testing, meaning you’re getting a durable, versatile, and long lasting coating! Adam’s UV Ceramic Paint Coating is a simple, ready to use system that combines versatility with ease of use. Throughout the time that we have offered a Ceramic Paint coating, we currently have offered single soft towels or borderless grey towels depending on the kit, but we’ve learned the plusher the towel the more oils are taken away during the process. Adam’s Ceramic Paint Coating with UV removes the risks of missed sections and improper application. Upon application, you will use the same process as usual except now you have the ability to shine a UV light and indicate where you’ve applied product, uneven areas, and final wipe down inspection to ensure no spots are left behind. This technology and unique chemistry was developed to make the process of ceramic coatings easier for the everyday user, and more thorough for the professional to ensure a thorough application is utilized. Not only will you be saving time during your ceramic coating process, but this technology will help you to master your skills and assurance in your craft. In the kit you’ll find: Key Features: For Use on Paint: Remove the 4oz bottle of Adam’s Surface Prep and supplied Towel and fold towel into fourths. Prepare your paint and use the supplied 4oz bottle of Adam’s Surface Prep and Surface Prep towel to clean and degrease the surface of any existing protection or residual films. Spritz each surface with a direct spray and once into the towel to optimally clean the surface. For Use on Plastic & Trim: Remove the 4oz bottle of Adam’s Surface Prep and supplied Edgeless Utility Towel and fold towel into fourths. Prepare your trim and use the supplied 4oz bottle of Adam’s Surface Prep and edgeless utility towel to clean and degrease the surface of any existing protection or residual films. Spritz each surface with a direct spray and once into the towel to optimally clean the surface. For heavily contaminated trim and plastic, use a deep cleanse with Tire & Rubber Cleaner and an edgeless utility towel. For Use on Paint: Remove the supplied UV Ceramic Paint Coating bottle from the packaging and the pair of supplied gloves. With the gloves on, open and begin to dispense the coating onto the supplied Micro Silk applicator and begin the coating process. Begin to work the product into the surface, ensuring full coverage over the desired area. Cross hatching motions are favored during this process and overlapping your previous pass by 50%. During your time between passes, utilize Adam’s UV Handheld light for inspections. For Use on Plastic & Trim: Remove the supplied UV Ceramic Paint Coating bottle from the packaging and the pair of supplied gloves. With the gloves on, open the bottle and begin dispensing the chemical onto the supplied micro silk applicator to begin the coating process. Begin to work the product into the surface, ensuring full coverage over the desired area. For Use on Paint: To begin the removal process, remove 1 of the supplied coating removal towels from the packaging and fold the towel into fourths. Begin wiping the coating and applying minimal pressure to the towel. Once fully removed, allow the coating to fully cure for 24 hours, free from elements or weathering. Not allowing optimal time will force the coating to cure with whatever elements touches it during the curing process. Once fully cured, you’re free to enjoy the open road and have coated, perfected paint no matter how harsh the conditions. For Use on Plastic & Trim: Allow coating to fully cure for 1-2 hours, free from elements or weathering. Not allowing optimal time will force the coating to cure with whatever elements touches it during the curing process. Once cured, you’re free to enjoy the open road and have clean, dressed plastic & trim no matter how harsh the conditions. For Use on Paint: To give your coating that extra pop after application, spray Adam’s Ceramic Boost to the coating to top the coating with an added layer of silica enhancement. Apply as needed. “Can I layer this product to make it last longer?”Yes, of course, but that doesn’t mean layering this product 10 times will make it 10x longer— any application after 3 rounds will render the product redundant and still provide the same hydrophobic effects. “What is Ceramic Glow Technology?”Ceramic Glow Technology is Adam’s Polishes Patent-Pending chemistry. It’s a crystalline form of an optical brightener that absorbs energy and emits light as it relaxes back down to a lower energy state. “What’s the difference between fluorescence and phosphorescence?”Length of time that the light is emitted. Said another way, the amount of time it takes for the electrons to relax and quit releasing energy in the form of photons or light. “Does the UV Coating act as a durability indicator?” No, it doesn’t. It’s currently offered as an application aid and utility for visualizing the coating. Lack of glow does not indicate lack of coating. “Why does the product glow more intensely on some substrates than others?”Differences in porosity and the ability of the coating to penetrate and bond to different surfaces will cause different levels of film thickness. The thicker the film, the more intense the glow typically. “Will my car glow blue in the sunlight?”No, because this coating is completely invisible and clear under standard light, the coating will only glow a bluish hue under the 395 NM UV light. “Will this coating glow after being “charged” with the UV light?”No, since this coating is fluorescent and not phosphorescent, it will excite and glow only when the light is shone. Contrarily, “glow in the dark” items have a yellow/greenish hue from phosphorescent dyes-- these slowly become excited under any light and will diminish over the course of a few minutes. “What can I use this on? Can I just use this on the whole car?”Adam’s UV Ceramic Paint Coating provides protection to an extreme range of areas on your vehicle. Painted surfaces, Trim, Bed Rail Covers, Plastic Engine Bay Components,Headlights, Bed liners, Tonneau covers, Canvas tops, Floor mats— All are safe to be protected. “What happens if I forget a spot or end up with a high-spot?”If you forget a spot and you catch it in time (10-20 minutes after removal) simply reapply to that area and wipe off after 1-2 minutes. Reactivating the product will allow for easier removal. If left on for longer, we recommend Brilliant Glaze and a microfiber applicator, or machine polishing with Correcting Polish to fully remove the imperfection. In the detailing world, it’s become testament that preparation is key. Caring for your towels properly, polishing paint to perfection before ceramic coatings, claying the surface before applying wax… Detailing is a combination of compounding steps to ensure a perfect finish is achieved and properly maintained. The highest achievable rank of protection we have to offer is our state-of-the-art ceramic coatings, which require multiple steps to ensure a flawless application. The last step before the ceramic coating process is a thorough wipe with an IPA (Isopropyl Alcohol) based solution to remove any existing residues or surface contaminants left behind during the polishing process. If this step isn’t executed properly, all the hard work and efforts you’ve previously performed can all go to waste.


Manufacturer Adam's Polishes


Brand Adam's Polishes


Item Weight 1.8 pounds


Package Dimensions 10.25 x 5.25 x 5.25 inches


Is Discontinued By Manufacturer No


Manufacturer Part Number CPC-kit


Folding No


ASIN B01NA7LKEO


Customer Reviews 4.4 out of 5 stars 113 ratings 4.4 out of 5 stars


Best Sellers Rank #8,829 in Automotive (See Top 100 in Automotive) #40 in Exterior Sealants


Date First Available November 18, 2016


Shipping

This product includes free shipping to all US addresses.


Delivery

Unless otherwise stated above, most products arrive within 2-3 business days. Larger items may take 6-9 business days. Tracking information will be automatically provided as soon as your order ships.


View our full shipping policy here.

Returns

This product can be returned within 30 days of delivery for a full refund. Please visit our returns center to begin a return.

View our full returns policy here.

Features

  • ✅ THE MOST ADVANCED PAINT PROTECTION FOR YOUR VEHICLE! Adam’s Ceramic Paint Coating is a clear, nanocrystalline coating that protects your vehicle from weather, chemicals, and UV rays while repelling water, dirt and other contaminants. Providing 9H hardness, 5+ years of protection even in the harshest conditions.
  • ✅ PATENT PENDING UV TRACING TECHNOLOGY! Infused with patent-pending Ceramic Glow Technology. This feature acts as an application aid allowing users or professionals the ability to never miss a spot and make sure the coating is perfect every time you apply it!
  • ✅ ULTRA HIGH GLOSS! The key to the coatings unbeatable “shine” is in the preparation stage. You’ll want to wash, clay, and remove any contaminants from the paint before polishing the paint to perfection. Then using the provided Coating Prep, you can wipe the vehicle down to remove any waxes or sealants left behind! Next, you can apply the ceramic coating using 50/50 overlapping to ensure full coverage.
  • ✅ EXTREMELY HYDROPHOBIC! Adam's New Ceramic Paint Coating is a super durable barrier to protect paint from dirt and bonded contaminants, with outstanding water beading that makes water almost jump off the surface! This nano coating is safe on clear coat, single stage, vinyl wraps, and lacquer paint finishes and can minimize the chances of creating swirl marks and scratches while washing and drying.
  • ✅ 110% SATISFACTION GUARANTEE! Proudly crafted in the USA, this state of the art nano ceramic car coating kit is specially designed using the most advanced technologies available. We pride ourselves on customer service and satisfaction and believe that this is THE BEST Ceramic Paint Coating on the market! If you don’t agree, we’ll do everything we can to make it right.

Description

When looking at our 3 different offerings of coatings, it’s best to think of them in terms of thickness/ overall durability. Our Spray Coating and Wheel Coating are varying formulations of coatings, Wheel being the thicker of the two, but designed especially to hold up against the harshest elements. With Adam’s UV Ceramic Paint Coating, it’s the slickest and glossiest of the formulations to have the most premium form of protection for your paint. As with all of Adam’s Ceramic formulations, these products are tested to the harshest alkaline and acid conditions prior to any real-life testing, meaning you’re getting a durable, versatile, and long lasting coating! Adam’s UV Ceramic Paint Coating is a simple, ready to use system that combines versatility with ease of use. Throughout the time that we have offered a Ceramic Paint coating, we currently have offered single soft towels or borderless grey towels depending on the kit, but we’ve learned the plusher the towel the more oils are taken away during the process. Adam’s Ceramic Paint Coating with UV removes the risks of missed sections and improper application. Upon application, you will use the same process as usual except now you have the ability to shine a UV light and indicate where you’ve applied product, uneven areas, and final wipe down inspection to ensure no spots are left behind. This technology and unique chemistry was developed to make the process of ceramic coatings easier for the everyday user, and more thorough for the professional to ensure a thorough application is utilized. Not only will you be saving time during your ceramic coating process, but this technology will help you to master your skills and assurance in your craft. In the kit you’ll find: Key Features: For Use on Paint: Remove the 4oz bottle of Adam’s Surface Prep and supplied Towel and fold towel into fourths. Prepare your paint and use the supplied 4oz bottle of Adam’s Surface Prep and Surface Prep towel to clean and degrease the surface of any existing protection or residual films. Spritz each surface with a direct spray and once into the towel to optimally clean the surface. For Use on Plastic & Trim: Remove the 4oz bottle of Adam’s Surface Prep and supplied Edgeless Utility Towel and fold towel into fourths. Prepare your trim and use the supplied 4oz bottle of Adam’s Surface Prep and edgeless utility towel to clean and degrease the surface of any existing protection or residual films. Spritz each surface with a direct spray and once into the towel to optimally clean the surface. For heavily contaminated trim and plastic, use a deep cleanse with Tire & Rubber Cleaner and an edgeless utility towel. For Use on Paint: Remove the supplied UV Ceramic Paint Coating bottle from the packaging and the pair of supplied gloves. With the gloves on, open and begin to dispense the coating onto the supplied Micro Silk applicator and begin the coating process. Begin to work the product into the surface, ensuring full coverage over the desired area. Cross hatching motions are favored during this process and overlapping your previous pass by 50%. During your time between passes, utilize Adam’s UV Handheld light for inspections. For Use on Plastic & Trim: Remove the supplied UV Ceramic Paint Coating bottle from the packaging and the pair of supplied gloves. With the gloves on, open the bottle and begin dispensing the chemical onto the supplied micro silk applicator to begin the coating process. Begin to work the product into the surface, ensuring full coverage over the desired area. For Use on Paint: To begin the removal process, remove 1 of the supplied coating removal towels from the packaging and fold the towel into fourths. Begin wiping the coating and applying minimal pressure to the towel. Once fully removed, allow the coating to fully cure for 24 hours, free from elements or weathering. Not allowing optimal time will force the coating to cure with whatever elements touches it during the curing process. Once fully cured, you’re free to enjoy the open road and have coated, perfected paint no matter how harsh the conditions. For Use on Plastic & Trim: Allow coating to fully cure for 1-2 hours, free from elements or weathering. Not allowing optimal time will force the coating to cure with whatever elements touches it during the curing process. Once cured, you’re free to enjoy the open road and have clean, dressed plastic & trim no matter how harsh the conditions. For Use on Paint: To give your coating that extra pop after application, spray Adam’s Ceramic Boost to the coating to top the coating with an added layer of silica enhancement. Apply as needed. “Can I layer this product to make it last longer?”Yes, of course, but that doesn’t mean layering this product 10 times will make it 10x longer— any application after 3 rounds will render the product redundant and still provide the same hydrophobic effects. “What is Ceramic Glow Technology?”Ceramic Glow Technology is Adam’s Polishes Patent-Pending chemistry. It’s a crystalline form of an optical brightener that absorbs energy and emits light as it relaxes back down to a lower energy state. “What’s the difference between fluorescence and phosphorescence?”Length of time that the light is emitted. Said another way, the amount of time it takes for the electrons to relax and quit releasing energy in the form of photons or light. “Does the UV Coating act as a durability indicator?” No, it doesn’t. It’s currently offered as an application aid and utility for visualizing the coating. Lack of glow does not indicate lack of coating. “Why does the product glow more intensely on some substrates than others?”Differences in porosity and the ability of the coating to penetrate and bond to different surfaces will cause different levels of film thickness. The thicker the film, the more intense the glow typically. “Will my car glow blue in the sunlight?”No, because this coating is completely invisible and clear under standard light, the coating will only glow a bluish hue under the 395 NM UV light. “Will this coating glow after being “charged” with the UV light?”No, since this coating is fluorescent and not phosphorescent, it will excite and glow only when the light is shone. Contrarily, “glow in the dark” items have a yellow/greenish hue from phosphorescent dyes-- these slowly become excited under any light and will diminish over the course of a few minutes. “What can I use this on? Can I just use this on the whole car?”Adam’s UV Ceramic Paint Coating provides protection to an extreme range of areas on your vehicle. Painted surfaces, Trim, Bed Rail Covers, Plastic Engine Bay Components,Headlights, Bed liners, Tonneau covers, Canvas tops, Floor mats— All are safe to be protected. “What happens if I forget a spot or end up with a high-spot?”If you forget a spot and you catch it in time (10-20 minutes after removal) simply reapply to that area and wipe off after 1-2 minutes. Reactivating the product will allow for easier removal. If left on for longer, we recommend Brilliant Glaze and a microfiber applicator, or machine polishing with Correcting Polish to fully remove the imperfection. In the detailing world, it’s become testament that preparation is key. Caring for your towels properly, polishing paint to perfection before ceramic coatings, claying the surface before applying wax… Detailing is a combination of compounding steps to ensure a perfect finish is achieved and properly maintained. The highest achievable rank of protection we have to offer is our state-of-the-art ceramic coatings, which require multiple steps to ensure a flawless application. The last step before the ceramic coating process is a thorough wipe with an IPA (Isopropyl Alcohol) based solution to remove any existing residues or surface contaminants left behind during the polishing process. If this step isn’t executed properly, all the hard work and efforts you’ve previously performed can all go to waste.


Manufacturer Adam's Polishes


Brand Adam's Polishes


Item Weight 1.8 pounds


Package Dimensions 10.25 x 5.25 x 5.25 inches


Is Discontinued By Manufacturer No


Manufacturer Part Number CPC-kit


Folding No


ASIN B01NA7LKEO


Customer Reviews 4.4 out of 5 stars 113 ratings 4.4 out of 5 stars


Best Sellers Rank #8,829 in Automotive (See Top 100 in Automotive) #40 in Exterior Sealants


Date First Available November 18, 2016


Shipping

This product includes free shipping to all US addresses.


Delivery

Unless otherwise stated above, most products arrive within 2-3 business days. Larger items may take 6-9 business days. Tracking information will be automatically provided as soon as your order ships.


View our full shipping policy here.

Returns

This product can be returned within 30 days of delivery for a full refund. Please visit our returns center to begin a return.

View our full returns policy here.

Features

  • ✅ THE MOST ADVANCED PAINT PROTECTION FOR YOUR VEHICLE! Adam’s Ceramic Paint Coating is a clear, nanocrystalline coating that protects your vehicle from weather, chemicals, and UV rays while repelling water, dirt and other contaminants. Providing 9H hardness, 5+ years of protection even in the harshest conditions.
  • ✅ PATENT PENDING UV TRACING TECHNOLOGY! Infused with patent-pending Ceramic Glow Technology. This feature acts as an application aid allowing users or professionals the ability to never miss a spot and make sure the coating is perfect every time you apply it!
  • ✅ ULTRA HIGH GLOSS! The key to the coatings unbeatable “shine” is in the preparation stage. You’ll want to wash, clay, and remove any contaminants from the paint before polishing the paint to perfection. Then using the provided Coating Prep, you can wipe the vehicle down to remove any waxes or sealants left behind! Next, you can apply the ceramic coating using 50/50 overlapping to ensure full coverage.
  • ✅ EXTREMELY HYDROPHOBIC! Adam's New Ceramic Paint Coating is a super durable barrier to protect paint from dirt and bonded contaminants, with outstanding water beading that makes water almost jump off the surface! This nano coating is safe on clear coat, single stage, vinyl wraps, and lacquer paint finishes and can minimize the chances of creating swirl marks and scratches while washing and drying.
  • ✅ 110% SATISFACTION GUARANTEE! Proudly crafted in the USA, this state of the art nano ceramic car coating kit is specially designed using the most advanced technologies available. We pride ourselves on customer service and satisfaction and believe that this is THE BEST Ceramic Paint Coating on the market! If you don’t agree, we’ll do everything we can to make it right.

Description

When looking at our 3 different offerings of coatings, it’s best to think of them in terms of thickness/ overall durability. Our Spray Coating and Wheel Coating are varying formulations of coatings, Wheel being the thicker of the two, but designed especially to hold up against the harshest elements. With Adam’s UV Ceramic Paint Coating, it’s the slickest and glossiest of the formulations to have the most premium form of protection for your paint. As with all of Adam’s Ceramic formulations, these products are tested to the harshest alkaline and acid conditions prior to any real-life testing, meaning you’re getting a durable, versatile, and long lasting coating! Adam’s UV Ceramic Paint Coating is a simple, ready to use system that combines versatility with ease of use. Throughout the time that we have offered a Ceramic Paint coating, we currently have offered single soft towels or borderless grey towels depending on the kit, but we’ve learned the plusher the towel the more oils are taken away during the process. Adam’s Ceramic Paint Coating with UV removes the risks of missed sections and improper application. Upon application, you will use the same process as usual except now you have the ability to shine a UV light and indicate where you’ve applied product, uneven areas, and final wipe down inspection to ensure no spots are left behind. This technology and unique chemistry was developed to make the process of ceramic coatings easier for the everyday user, and more thorough for the professional to ensure a thorough application is utilized. Not only will you be saving time during your ceramic coating process, but this technology will help you to master your skills and assurance in your craft. In the kit you’ll find: Key Features: For Use on Paint: Remove the 4oz bottle of Adam’s Surface Prep and supplied Towel and fold towel into fourths. Prepare your paint and use the supplied 4oz bottle of Adam’s Surface Prep and Surface Prep towel to clean and degrease the surface of any existing protection or residual films. Spritz each surface with a direct spray and once into the towel to optimally clean the surface. For Use on Plastic & Trim: Remove the 4oz bottle of Adam’s Surface Prep and supplied Edgeless Utility Towel and fold towel into fourths. Prepare your trim and use the supplied 4oz bottle of Adam’s Surface Prep and edgeless utility towel to clean and degrease the surface of any existing protection or residual films. Spritz each surface with a direct spray and once into the towel to optimally clean the surface. For heavily contaminated trim and plastic, use a deep cleanse with Tire & Rubber Cleaner and an edgeless utility towel. For Use on Paint: Remove the supplied UV Ceramic Paint Coating bottle from the packaging and the pair of supplied gloves. With the gloves on, open and begin to dispense the coating onto the supplied Micro Silk applicator and begin the coating process. Begin to work the product into the surface, ensuring full coverage over the desired area. Cross hatching motions are favored during this process and overlapping your previous pass by 50%. During your time between passes, utilize Adam’s UV Handheld light for inspections. For Use on Plastic & Trim: Remove the supplied UV Ceramic Paint Coating bottle from the packaging and the pair of supplied gloves. With the gloves on, open the bottle and begin dispensing the chemical onto the supplied micro silk applicator to begin the coating process. Begin to work the product into the surface, ensuring full coverage over the desired area. For Use on Paint: To begin the removal process, remove 1 of the supplied coating removal towels from the packaging and fold the towel into fourths. Begin wiping the coating and applying minimal pressure to the towel. Once fully removed, allow the coating to fully cure for 24 hours, free from elements or weathering. Not allowing optimal time will force the coating to cure with whatever elements touches it during the curing process. Once fully cured, you’re free to enjoy the open road and have coated, perfected paint no matter how harsh the conditions. For Use on Plastic & Trim: Allow coating to fully cure for 1-2 hours, free from elements or weathering. Not allowing optimal time will force the coating to cure with whatever elements touches it during the curing process. Once cured, you’re free to enjoy the open road and have clean, dressed plastic & trim no matter how harsh the conditions. For Use on Paint: To give your coating that extra pop after application, spray Adam’s Ceramic Boost to the coating to top the coating with an added layer of silica enhancement. Apply as needed. “Can I layer this product to make it last longer?”Yes, of course, but that doesn’t mean layering this product 10 times will make it 10x longer— any application after 3 rounds will render the product redundant and still provide the same hydrophobic effects. “What is Ceramic Glow Technology?”Ceramic Glow Technology is Adam’s Polishes Patent-Pending chemistry. It’s a crystalline form of an optical brightener that absorbs energy and emits light as it relaxes back down to a lower energy state. “What’s the difference between fluorescence and phosphorescence?”Length of time that the light is emitted. Said another way, the amount of time it takes for the electrons to relax and quit releasing energy in the form of photons or light. “Does the UV Coating act as a durability indicator?” No, it doesn’t. It’s currently offered as an application aid and utility for visualizing the coating. Lack of glow does not indicate lack of coating. “Why does the product glow more intensely on some substrates than others?”Differences in porosity and the ability of the coating to penetrate and bond to different surfaces will cause different levels of film thickness. The thicker the film, the more intense the glow typically. “Will my car glow blue in the sunlight?”No, because this coating is completely invisible and clear under standard light, the coating will only glow a bluish hue under the 395 NM UV light. “Will this coating glow after being “charged” with the UV light?”No, since this coating is fluorescent and not phosphorescent, it will excite and glow only when the light is shone. Contrarily, “glow in the dark” items have a yellow/greenish hue from phosphorescent dyes-- these slowly become excited under any light and will diminish over the course of a few minutes. “What can I use this on? Can I just use this on the whole car?”Adam’s UV Ceramic Paint Coating provides protection to an extreme range of areas on your vehicle. Painted surfaces, Trim, Bed Rail Covers, Plastic Engine Bay Components,Headlights, Bed liners, Tonneau covers, Canvas tops, Floor mats— All are safe to be protected. “What happens if I forget a spot or end up with a high-spot?”If you forget a spot and you catch it in time (10-20 minutes after removal) simply reapply to that area and wipe off after 1-2 minutes. Reactivating the product will allow for easier removal. If left on for longer, we recommend Brilliant Glaze and a microfiber applicator, or machine polishing with Correcting Polish to fully remove the imperfection. In the detailing world, it’s become testament that preparation is key. Caring for your towels properly, polishing paint to perfection before ceramic coatings, claying the surface before applying wax… Detailing is a combination of compounding steps to ensure a perfect finish is achieved and properly maintained. The highest achievable rank of protection we have to offer is our state-of-the-art ceramic coatings, which require multiple steps to ensure a flawless application. The last step before the ceramic coating process is a thorough wipe with an IPA (Isopropyl Alcohol) based solution to remove any existing residues or surface contaminants left behind during the polishing process. If this step isn’t executed properly, all the hard work and efforts you’ve previously performed can all go to waste.


Manufacturer Adam's Polishes


Brand Adam's Polishes


Item Weight 1.8 pounds


Package Dimensions 10.25 x 5.25 x 5.25 inches


Is Discontinued By Manufacturer No


Manufacturer Part Number CPC-kit


Folding No


ASIN B01NA7LKEO


Customer Reviews 4.4 out of 5 stars 113 ratings 4.4 out of 5 stars


Best Sellers Rank #8,829 in Automotive (See Top 100 in Automotive) #40 in Exterior Sealants


Date First Available November 18, 2016


abunda_amazon_reviews After reading up on the ceramic coating craze, and getting several estimates from local shops ($1300-1500!), I decided to take the plunge and explore this technology on a do-it-yourself basis, being reasonably handy and having worked on, and even painted, my own cars. Pretty obvious that surface prep is key, but given that I was starting with a brand new car, with few paint defects (other than a couple of very minor factory mistakes that I wasn't going to correct), surface prep wasn't too exhausting. Once it had been polished, scrubbed, and alcohol-wiped, I started with just doing the front bumper area. It was surprisingly easily. In several minutes after a slow and repetitive application process, the ceramic application material sets up quickly and gets really tacky, and comes off easily. The results are visible from the get-go. Very deep and enhanced gloss. Even did the front glass, and where you can really see the difference in how the glass looks afterwards. Working my way through the rest of the body panels slowly. We will see about durability, but it's clear, for example, that after a short road trip, bugs and other road junk comes off much more easily. Nothing seems to stick to the car. More later after I've had a chance to see about how well it lasts. Really worth it, and roughly 10% of the professional price. So far, results look great, and the work level isn't back breaking. I'm sure I'll get better at this as I do more - and I will do our other car for sure.;;Reviewed in the United States on December 6, 2018;;5.0 out of 5 stars;;Viable alternative to the $1300 professional ceramic coatings;;D. F. Watt;;;Took me 4 days in total to perform the entire process. Strip wash>clay bar>correcting polish>finishing polish>coating prep>ceramic coating application> cure 24 hours in garage> ceramic boost. Taking the time to really follow and understand each step of the process is crucial. After making your paint as bare and close to perfect as possible you have to let the ceramic coating set for 3-5 minutes, not the 30 seconds many other brands require before wiping it off with your microfiber. Vehicle must be garage kept for 24 hours after application to ensure a proper bond without moisture contamination. This is an extremely labor intensive and time consuming process but the results are worth every second. Shout out to Adam's for another exceptional product.;;Reviewed in the United States on September 22, 2018;;5.0 out of 5 stars;;Exceptional product. Take you're time.;;Ian Douglas;;;Reading Adam's promotion , and instructions had me thinking this would be the way to go , but actually the application should be done by someone that has experience . I ended up with streaks all over my truck . Very disappointed , and a costly mistake .;;Reviewed in the United States on April 12, 2019;;1.0 out of 5 stars;;Not happy;;Mort Seligman;;;This ceramic is the real deal. The kit comes with everything you need to fully coat 2 midsize sedans. After all the prep work, your car will look gorgeous, then this coat can do its job to maintain that. This stuff is not meant to hide or correct imperfections, you have to put in the work to fix your paint. If you don’t fix any imperfections, they’ll be frozen in time under the ceramic. As directed, wash, fully dry, clay, machine polish (preferably DA), and then remove all the residue from the previous steps. The ceramic coat goes on smooth, comes off with a tactile drag and begins to buff out to a smooth glass-like surface. Took me the better part of a day from wash to complete coat. That’s the reason it costs so much to have ceramic applied by a pro. Take your time and apply the coating to a small area at a time. On a mid size sedan, I’d say a quarter to a third of the area of the hood at a time, or the top half of a door. Don’t get it on glass, trim, or tail lights; it won’t come off without a fight. Masking off those things is a good idea. Don’t try to do too much at once. This stuff flashes pretty quick in warm weather and is ready to be hand wiped no longer than 30 seconds. Get ahead of yourself, and you may miss application or wiping off of a spot. If it cures, it’s on there for good. The only way to correct it is to machine polish it off of the whole panel, remove all compound residue and reapply. If you’re not ready to do all this, stick with wax. Ceramic is not forgiving, but well worth it in longevity compared to true wax or polymer waxes.;;Reviewed in the United States on August 23, 2019;;5.0 out of 5 stars;;It’s the real deal, but take your time for best results.;;Daniel A. Mcarthur;;;A month after applying, I am impressed with the results. The shine is incredible and makes my car easier to maintenance just in time for bug season this spring. I deducted a star due to the impressionable inconsistencies in their documentation and the inability to apply multiple coats. Details are below: 1. Instructions provided conflict with their web page regarding time to allowing 9H coating to sit before wiping. 2. Only one layer can be applied. Adams states that stocking multiple layers does not prolong use. I personally does feel this statement is accurate but I don’t want to argue with Adams regarding it. Other product manufacturers support this. 3. Dry time in provided instructions differs from Adams You Tube video.;;Reviewed in the United States on April 18, 2019;;4.0 out of 5 stars;;Superior Shine;;cOOkiE MonSTeR;;;I am impressed with the coating. I must admit it took a lot of prep work to get the car ready. I tried it as I spent $600 dollars having my new truck coated immediately after purchase so paint prep would be minimal. This product had a much more reasonable price. My commuter car has paint damage but I saw it as an opportunity to practice if I get another vehicle. While I believe I made some minor mistakes with overlap in small areas the process was easy enough. I let it cure as required and applied the included Ceramic Boost per instructions. While it is not the best looking car, I am pleased with the results it gave. I will not hesitate to use it again. I hope it lasts as long as advertised.;;Reviewed in the United States on April 22, 2019;;4.0 out of 5 stars;;Practice for the real deal;;Paul T.;;;This was going to be my first coating but after reading more about all the prep and how long I'd have to live with it, I went back to my sealant ways. So I'm not going to say anything bad about it. At least I got some really nice microfiber out of the deal. Oh well.;;Reviewed in the United States on May 31, 2019;;5.0 out of 5 stars;;I actually chickened out;;kevin;;;This stuff is amazing! Took me 8 hours to complete the process, but I couldn’t be happier with the results.;;Reviewed in the United States on February 3, 2019;;5.0 out of 5 stars;;Great product!;;Ryan

Shipping

This product includes free shipping to all US addresses.


Delivery

Orders placed now will arrive in 6-9 business days. Tracking information will be automatically provided as soon as your order ships.


View our full shipping policy here.

Returns

This product can be returned within 30 days of delivery for a full refund. Please visit our returns center to begin a return.

View our full returns policy here.

Top Amazon Reviews


5.0 out of 5 stars
By D. F. Watt - Reviewed in the United States on December 6, 2018
Viable alternative to the $1300 professional ceramic coatings
After reading up on the ceramic coating craze, and getting several estimates from local shops ($1300-1500!), I decided to take the plunge and explore this technology on a do-it-yourself basis, being reasonably handy and having worked on, and even painted, my own cars. Pretty obvious that surface prep is key, but given that I was starting with a brand new car, with few paint defects (other than a couple of very minor factory mistakes that I wasn't going to correct), surface prep wasn't too exhausting. Once it had been polished, scrubbed, and alcohol-wiped, I started with just doing the front bumper area. It was surprisingly easily. In several minutes after a slow and repetitive application process, the ceramic application material sets up quickly and gets really tacky, and comes off easily. The results are visible from the get-go. Very deep and enhanced gloss. Even did the front glass, and where you can really see the difference in how the glass looks afterwards. Working my way through the rest of the body panels slowly. We will see about durability, but it's clear, for example, that after a short road trip, bugs and other road junk comes off much more easily. Nothing seems to stick to the car. More later after I've had a chance to see about how well it lasts. Really worth it, and roughly 10% of the professional price. So far, results look great, and the work level isn't back breaking. I'm sure I'll get better at this as I do more - and I will do our other car for sure.

5.0 out of 5 stars
By Ian Douglas - Reviewed in the United States on September 22, 2018
Exceptional product. Take you're time.
Took me 4 days in total to perform the entire process. Strip wash>clay bar>correcting polish>finishing polish>coating prep>ceramic coating application> cure 24 hours in garage> ceramic boost. Taking the time to really follow and understand each step of the process is crucial. After making your paint as bare and close to perfect as possible you have to let the ceramic coating set for 3-5 minutes, not the 30 seconds many other brands require before wiping it off with your microfiber. Vehicle must be garage kept for 24 hours after application to ensure a proper bond without moisture contamination. This is an extremely labor intensive and time consuming process but the results are worth every second. Shout out to Adam's for another exceptional product.

1.0 out of 5 stars
By Mort Seligman - Reviewed in the United States on April 12, 2019
Not happy
Reading Adam's promotion , and instructions had me thinking this would be the way to go , but actually the application should be done by someone that has experience . I ended up with streaks all over my truck . Very disappointed , and a costly mistake .

5.0 out of 5 stars
By Daniel A. Mcarthur - Reviewed in the United States on August 23, 2019
It’s the real deal, but take your time for best results.
This ceramic is the real deal. The kit comes with everything you need to fully coat 2 midsize sedans. After all the prep work, your car will look gorgeous, then this coat can do its job to maintain that. This stuff is not meant to hide or correct imperfections, you have to put in the work to fix your paint. If you don’t fix any imperfections, they’ll be frozen in time under the ceramic. As directed, wash, fully dry, clay, machine polish (preferably DA), and then remove all the residue from the previous steps. The ceramic coat goes on smooth, comes off with a tactile drag and begins to buff out to a smooth glass-like surface. Took me the better part of a day from wash to complete coat. That’s the reason it costs so much to have ceramic applied by a pro. Take your time and apply the coating to a small area at a time. On a mid size sedan, I’d say a quarter to a third of the area of the hood at a time, or the top half of a door. Don’t get it on glass, trim, or tail lights; it won’t come off without a fight. Masking off those things is a good idea. Don’t try to do too much at once. This stuff flashes pretty quick in warm weather and is ready to be hand wiped no longer than 30 seconds. Get ahead of yourself, and you may miss application or wiping off of a spot. If it cures, it’s on there for good. The only way to correct it is to machine polish it off of the whole panel, remove all compound residue and reapply. If you’re not ready to do all this, stick with wax. Ceramic is not forgiving, but well worth it in longevity compared to true wax or polymer waxes.

4.0 out of 5 stars
By cOOkiE MonSTeR - Reviewed in the United States on April 18, 2019
Superior Shine
A month after applying, I am impressed with the results. The shine is incredible and makes my car easier to maintenance just in time for bug season this spring. I deducted a star due to the impressionable inconsistencies in their documentation and the inability to apply multiple coats. Details are below: 1. Instructions provided conflict with their web page regarding time to allowing 9H coating to sit before wiping. 2. Only one layer can be applied. Adams states that stocking multiple layers does not prolong use. I personally does feel this statement is accurate but I don’t want to argue with Adams regarding it. Other product manufacturers support this. 3. Dry time in provided instructions differs from Adams You Tube video.

4.0 out of 5 stars
By Paul T. - Reviewed in the United States on April 22, 2019
Practice for the real deal
I am impressed with the coating. I must admit it took a lot of prep work to get the car ready. I tried it as I spent $600 dollars having my new truck coated immediately after purchase so paint prep would be minimal. This product had a much more reasonable price. My commuter car has paint damage but I saw it as an opportunity to practice if I get another vehicle. While I believe I made some minor mistakes with overlap in small areas the process was easy enough. I let it cure as required and applied the included Ceramic Boost per instructions. While it is not the best looking car, I am pleased with the results it gave. I will not hesitate to use it again. I hope it lasts as long as advertised.

5.0 out of 5 stars
By kevin - Reviewed in the United States on May 31, 2019
I actually chickened out
This was going to be my first coating but after reading more about all the prep and how long I'd have to live with it, I went back to my sealant ways. So I'm not going to say anything bad about it. At least I got some really nice microfiber out of the deal. Oh well.

5.0 out of 5 stars
By Ryan - Reviewed in the United States on February 3, 2019
Great product!
This stuff is amazing! Took me 8 hours to complete the process, but I couldn’t be happier with the results.

Recent Reviews


5.0 out of 5 stars
By D. F. Watt - Reviewed in the United States on December 6, 2018
Viable alternative to the $1300 professional ceramic coatings
After reading up on the ceramic coating craze, and getting several estimates from local shops ($1300-1500!), I decided to take the plunge and explore this technology on a do-it-yourself basis, being reasonably handy and having worked on, and even painted, my own cars. Pretty obvious that surface prep is key, but given that I was starting with a brand new car, with few paint defects (other than a couple of very minor factory mistakes that I wasn't going to correct), surface prep wasn't too exhausting. Once it had been polished, scrubbed, and alcohol-wiped, I started with just doing the front bumper area. It was surprisingly easily. In several minutes after a slow and repetitive application process, the ceramic application material sets up quickly and gets really tacky, and comes off easily. The results are visible from the get-go. Very deep and enhanced gloss. Even did the front glass, and where you can really see the difference in how the glass looks afterwards. Working my way through the rest of the body panels slowly. We will see about durability, but it's clear, for example, that after a short road trip, bugs and other road junk comes off much more easily. Nothing seems to stick to the car. More later after I've had a chance to see about how well it lasts. Really worth it, and roughly 10% of the professional price. So far, results look great, and the work level isn't back breaking. I'm sure I'll get better at this as I do more - and I will do our other car for sure.

5.0 out of 5 stars
By Ian Douglas - Reviewed in the United States on September 22, 2018
Exceptional product. Take you're time.
Took me 4 days in total to perform the entire process. Strip wash>clay bar>correcting polish>finishing polish>coating prep>ceramic coating application> cure 24 hours in garage> ceramic boost. Taking the time to really follow and understand each step of the process is crucial. After making your paint as bare and close to perfect as possible you have to let the ceramic coating set for 3-5 minutes, not the 30 seconds many other brands require before wiping it off with your microfiber. Vehicle must be garage kept for 24 hours after application to ensure a proper bond without moisture contamination. This is an extremely labor intensive and time consuming process but the results are worth every second. Shout out to Adam's for another exceptional product.

1.0 out of 5 stars
By Mort Seligman - Reviewed in the United States on April 12, 2019
Not happy
Reading Adam's promotion , and instructions had me thinking this would be the way to go , but actually the application should be done by someone that has experience . I ended up with streaks all over my truck . Very disappointed , and a costly mistake .

5.0 out of 5 stars
By Daniel A. Mcarthur - Reviewed in the United States on August 23, 2019
It’s the real deal, but take your time for best results.
This ceramic is the real deal. The kit comes with everything you need to fully coat 2 midsize sedans. After all the prep work, your car will look gorgeous, then this coat can do its job to maintain that. This stuff is not meant to hide or correct imperfections, you have to put in the work to fix your paint. If you don’t fix any imperfections, they’ll be frozen in time under the ceramic. As directed, wash, fully dry, clay, machine polish (preferably DA), and then remove all the residue from the previous steps. The ceramic coat goes on smooth, comes off with a tactile drag and begins to buff out to a smooth glass-like surface. Took me the better part of a day from wash to complete coat. That’s the reason it costs so much to have ceramic applied by a pro. Take your time and apply the coating to a small area at a time. On a mid size sedan, I’d say a quarter to a third of the area of the hood at a time, or the top half of a door. Don’t get it on glass, trim, or tail lights; it won’t come off without a fight. Masking off those things is a good idea. Don’t try to do too much at once. This stuff flashes pretty quick in warm weather and is ready to be hand wiped no longer than 30 seconds. Get ahead of yourself, and you may miss application or wiping off of a spot. If it cures, it’s on there for good. The only way to correct it is to machine polish it off of the whole panel, remove all compound residue and reapply. If you’re not ready to do all this, stick with wax. Ceramic is not forgiving, but well worth it in longevity compared to true wax or polymer waxes.

4.0 out of 5 stars
By cOOkiE MonSTeR - Reviewed in the United States on April 18, 2019
Superior Shine
A month after applying, I am impressed with the results. The shine is incredible and makes my car easier to maintenance just in time for bug season this spring. I deducted a star due to the impressionable inconsistencies in their documentation and the inability to apply multiple coats. Details are below: 1. Instructions provided conflict with their web page regarding time to allowing 9H coating to sit before wiping. 2. Only one layer can be applied. Adams states that stocking multiple layers does not prolong use. I personally does feel this statement is accurate but I don’t want to argue with Adams regarding it. Other product manufacturers support this. 3. Dry time in provided instructions differs from Adams You Tube video.

4.0 out of 5 stars
By Paul T. - Reviewed in the United States on April 22, 2019
Practice for the real deal
I am impressed with the coating. I must admit it took a lot of prep work to get the car ready. I tried it as I spent $600 dollars having my new truck coated immediately after purchase so paint prep would be minimal. This product had a much more reasonable price. My commuter car has paint damage but I saw it as an opportunity to practice if I get another vehicle. While I believe I made some minor mistakes with overlap in small areas the process was easy enough. I let it cure as required and applied the included Ceramic Boost per instructions. While it is not the best looking car, I am pleased with the results it gave. I will not hesitate to use it again. I hope it lasts as long as advertised.

5.0 out of 5 stars
By kevin - Reviewed in the United States on May 31, 2019
I actually chickened out
This was going to be my first coating but after reading more about all the prep and how long I'd have to live with it, I went back to my sealant ways. So I'm not going to say anything bad about it. At least I got some really nice microfiber out of the deal. Oh well.

5.0 out of 5 stars
By Ryan - Reviewed in the United States on February 3, 2019
Great product!
This stuff is amazing! Took me 8 hours to complete the process, but I couldn’t be happier with the results.