2.13inch E-Ink Display HAT V4 Version, Black/White Two-Color 250x122 Pixel E-Paper Module for Raspberry Pi 5/ 4B/3B+/3B/2B/A+/Zero W/WH/Zero 2 W/Jetson Nano SPI Interface, Support Partial Refresh
Buy Now, Pay Later
- – 4-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Recently Viewed
Features
- This is 2.13inch E-Ink display HAT with Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi series boards, Jetson Nano. 250x122 resolution, Black and White Two Display colors, with embedded controller, communicating via SPI interface, supports partial refresh.
- No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
- SPI interface, for connecting with controller boards likeArduino/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs.
- Version Notice: The driver board is Rev2.1 (Version 2.1), which is independent of the screen version. Currently, there is only Rev2.1 (Version 2.1) for the driver board and QC label V4 is for the screen version, QC label V4 is currently being shipped.
- Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32): bit.ly/3hZh77i
Features
- This is 2.13inch E-Ink display HAT for Raspberry Pi,250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
- No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
- Preserved solder pads for SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.Onboard voltage translator, compatible with 3.3V/5V MCUs
- Operating voltage: 3.3V/5V. Interface: SPI. Outline dimension: 65mm x 30.2mm. Display size: 23.71mm x 48.55mm. Dot pitch: 0.194 x 0.194. Resolution: 250 x 122. Display color: black, white. Grey level: 2. Partial refresh time: 0.3s. Full refresh time: 2s. Refresh power: 26.4mW(typ.). Standby power: 170.
Description
Overview This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250x122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Package Content 2.13inch e-Paper HAT x1 RPi screws pack (2pcs) x1 PH2.0 20cm x1 Version 2 and Version 3 Attention: Due to the chip upgrade, the 2.13inch e-Paper V2 (only raw panel) will be upgraded to the 2.13inch e-Paper (only raw panel)V3 version. Old and new demos are not compatible. Compared with the V2 version, the V3 version is compatible with other appearances and functions except for the chip and driver. For the regulart customers, if you need to purchase a new screen,please pay attention to the update program. For the new customer,if you purchase for the first time,there is a V3 label on the back of the screen, just use the V3 demo directly. (December 2021). If the screen with the partial mode of the V3 is slow, you can change the refreshing speed by modifying the waveform in EPD_2in13_V3.c. If the value is reduced, the speed will be accelerated. However, when the refreshing speed is improved, the color of the screen with the partial mode will fade. Driver Board: The version of the driver board and the screen are independent. The current version of the driver board is Rev2.1, with power-off function and level conversion function. The driver to be used is mainly selected according to the screen version.
Product Dimensions: 1.18 x 0.79 x 0.79 inches
Item Weight: 1.9 ounces
Manufacturer: Waveshare
Item model number: 2.13inch e-Paper Display HAT
Date First Available: October 12, 2019
Brand: waveshare
Model Name: 2.13inch E-Paper HAT V4 Version
Connectivity Technology: GPIO
Included Components: 2.13inch e-Paper HAT, RPi screws pack (2pcs), PH2.0 20cm
Operating System: Linux
Connectivity Technology: GPIO
Operating System: Linux
Processor Brand: ARM
Compatible Devices: Raspberry Pi 2B, 3B, Zero, Zero W, Jetson Nano
RAM Memory Technology: LPDDR2, LPDDR4
Item Dimensions L x W x H: 1.18"L x 0.79"W x 0.79"H
Brand: waveshare
Model Name: 2.13inch E-Paper HAT V4 Version
Built-In Media: 2.13inch e-Paper HAT, RPi screws pack (2pcs), PH2.0 20cm
UPC: 778365986658
Model Number: 2.13inch e-Paper Display HAT
Mfr Part Number: 2.13inch e-Paper Display HAT
Manufacturer: Waveshare
Frequently asked questions
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Top Amazon Reviews
