1 Roll 13mm X 33m 108ft Heat Vinyl Press Tape,Heat Resistant Sublimation Tape for Heat Transfer,High Temperature Tape for Electronics Masking,Soldering, Protecting Circuit Board
Checking for changes
Product info up-to-date
Product info updated
We've detected that this product is out of stock. Enter your email below and we will notify you when it is available.
Promotional Offer
Estimations exclude tax, and assume no other Klarna balances. Non-promotional balances have a 19.99% APR and a $2 monthly minimum interest charge. Accounts are subject to credit approval, and issued by WebBank, member FDIC.
Heat resistant tape is a polyester film tape with a high temperature resistant adhesive.
Maximum heat resistance: 482 F (250C),comes off clean,easy peal and no residue.
It's really indispensable when sublimating and the tape can do the job very well.
The width of the tape is 13mm (1/2inch),it is 33 meters (108 feet) long.
1 roll of tape in 1 package.
Description
Goldfinger tape, also known as polyimide tape, is a
polyimide film used as a substrate to coat high-performance silicone pressure-
sensitive adhesives on one side. High-precision coating reaches ± 2.5um, no
scratches, drawing and other phenomena, good shear, easy punching die-cutting
process, with excellent high temperature resistance and solvent resistance!
Product Features Heat resistant tape is a polyester film tape with a high
temperature resistant adhesive.Maximum heat resistance: 482 ℉ (250℃)，comes off
clean，easy peal and no residue. The width of the tape is 13mm (1/2
inch)/20mm（4/5 inch）,it is all 33 meters (108 feet) long. Read more Why do we
choose this tape? It's really indispensable when sublimating and the tape can
do the job very well.It is a must have if you make shirts, hats, or anything
with htv or sublimation.This is a very good tape width for use. Not too wide,
and not too narrow.The length of the tape is really long, and the tape rolls
looks very “strong”. Read more Tape is widely used in various industries
Suitable for wave soldering shield of electronic circuit board, protection of
gold finger and electrical insulation, motor insulation, and positive and
negative pole of lithium battery.Ideal for protecting sensitive printed
circuit board components such as gold leads and gold fingers during the
process of wave soldering.Also extensive use as electrical insulation for
transformer, motor, coil, capacitor and frequency conversion power supply in
electronic industry. Read more
Is Discontinued By Manufacturer : No
Product Dimensions : 5.51 x 5.12 x 0.59 inches; 1.45 Ounces
Date First Available : July 4, 2018
Manufacturer : EQUTY BAYMERS
Best Sellers Rank: #137 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #1 in Adhesive Transfer Tape
#1 in Adhesive Transfer Tape:
Customer Reviews: 4.8 out of 5 stars 7,989 ratings
This product includes free shipping to all US addresses.
Delivery
Unless otherwise stated above, most products arrive within 2-3 business days. Larger items may take 6-9 business days. Tracking information will be automatically provided as soon as your order ships.
Heat resistant tape is a polyester film tape with a high temperature resistant adhesive.
Maximum heat resistance: 482 F (250C),comes off clean,easy peal and no residue.
It's really indispensable when sublimating and the tape can do the job very well.
The width of the tape is 13mm (1/2inch),it is 33 meters (108 feet) long.
1 roll of tape in 1 package.
Description
Goldfinger tape, also known as polyimide tape, is a
polyimide film used as a substrate to coat high-performance silicone pressure-
sensitive adhesives on one side. High-precision coating reaches ± 2.5um, no
scratches, drawing and other phenomena, good shear, easy punching die-cutting
process, with excellent high temperature resistance and solvent resistance!
Product Features Heat resistant tape is a polyester film tape with a high
temperature resistant adhesive.Maximum heat resistance: 482 ℉ (250℃)，comes off
clean，easy peal and no residue. The width of the tape is 13mm (1/2
inch)/20mm（4/5 inch）,it is all 33 meters (108 feet) long. Read more Why do we
choose this tape? It's really indispensable when sublimating and the tape can
do the job very well.It is a must have if you make shirts, hats, or anything
with htv or sublimation.This is a very good tape width for use. Not too wide,
and not too narrow.The length of the tape is really long, and the tape rolls
looks very “strong”. Read more Tape is widely used in various industries
Suitable for wave soldering shield of electronic circuit board, protection of
gold finger and electrical insulation, motor insulation, and positive and
negative pole of lithium battery.Ideal for protecting sensitive printed
circuit board components such as gold leads and gold fingers during the
process of wave soldering.Also extensive use as electrical insulation for
transformer, motor, coil, capacitor and frequency conversion power supply in
electronic industry. Read more
Is Discontinued By Manufacturer : No
Product Dimensions : 5.51 x 5.12 x 0.59 inches; 1.45 Ounces
Date First Available : July 4, 2018
Manufacturer : EQUTY BAYMERS
Best Sellers Rank: #137 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #1 in Adhesive Transfer Tape
#1 in Adhesive Transfer Tape:
Customer Reviews: 4.8 out of 5 stars 7,989 ratings
This product includes free shipping to all US addresses.
Delivery
Unless otherwise stated above, most products arrive within 2-3 business days. Larger items may take 6-9 business days. Tracking information will be automatically provided as soon as your order ships.
Heat resistant tape is a polyester film tape with a high temperature resistant adhesive.
Maximum heat resistance: 482 F (250C),comes off clean,easy peal and no residue.
It's really indispensable when sublimating and the tape can do the job very well.
The width of the tape is 13mm (1/2inch),it is 33 meters (108 feet) long.
1 roll of tape in 1 package.
Description
Goldfinger tape, also known as polyimide tape, is a
polyimide film used as a substrate to coat high-performance silicone pressure-
sensitive adhesives on one side. High-precision coating reaches ± 2.5um, no
scratches, drawing and other phenomena, good shear, easy punching die-cutting
process, with excellent high temperature resistance and solvent resistance!
Product Features Heat resistant tape is a polyester film tape with a high
temperature resistant adhesive.Maximum heat resistance: 482 ℉ (250℃)，comes off
clean，easy peal and no residue. The width of the tape is 13mm (1/2
inch)/20mm（4/5 inch）,it is all 33 meters (108 feet) long. Read more Why do we
choose this tape? It's really indispensable when sublimating and the tape can
do the job very well.It is a must have if you make shirts, hats, or anything
with htv or sublimation.This is a very good tape width for use. Not too wide,
and not too narrow.The length of the tape is really long, and the tape rolls
looks very “strong”. Read more Tape is widely used in various industries
Suitable for wave soldering shield of electronic circuit board, protection of
gold finger and electrical insulation, motor insulation, and positive and
negative pole of lithium battery.Ideal for protecting sensitive printed
circuit board components such as gold leads and gold fingers during the
process of wave soldering.Also extensive use as electrical insulation for
transformer, motor, coil, capacitor and frequency conversion power supply in
electronic industry. Read more
Is Discontinued By Manufacturer : No
Product Dimensions : 5.51 x 5.12 x 0.59 inches; 1.45 Ounces
Date First Available : July 4, 2018
Manufacturer : EQUTY BAYMERS
Best Sellers Rank: #137 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #1 in Adhesive Transfer Tape
#1 in Adhesive Transfer Tape:
Customer Reviews: 4.8 out of 5 stars 7,989 ratings
Shipping
This product includes free shipping to all US addresses.
Delivery
Orders placed now will arrive in 6-9 business days. Tracking information will be automatically provided as soon as your order ships.
By Carmie - Reviewed in the United States on February 13, 2019
Great for HTV and heat press!!!
Wish I had discovered this stuff earlier! I used today for the first time and it made making shirts with HTV and my heat press much easier. I was able to tape different colors for the same shirt together making the process quicker. Tape was easily removed and left absolutely no residue on my shirt. Also, some HTV transfer sheets (like for glitter) aren’t very sticky. I will be able to tape the sheet down to my shirt to ensure it doesn’t move during transport to the heat press.
4.0 out of 5 stars
By TerriJ - Reviewed in the United States on May 5, 2019
Not as pleased as I was hoping I would be
For many years now I have used the blue colored heat transfer tape. It has always worked well and given me no trouble. I purchased the gold colored tape because I felt the bright contrast may be easier to see. Well, yes, it's easier to see but the tape is so thin it is very difficult to remove once heated - and not heated for that matter. I think I also prefer a wider tape. I obviously didn't check the width before purchasing. I suppose I will throw it in my "in case I run out" drawer and go back to the blue heat tape. Not the seller's fault, I just prefer a thicker tape as it's easier to remove after being heated.
5.0 out of 5 stars
By Brenda w - Reviewed in the United States on November 12, 2019
Works perfectly
Worked perfectly. Stayed in place and was just like a Teflon sheet very heat resistant. Works perfectly with my cricut mini press to keep things in place while pressing on small items like baseball caps. Will order again when I’m running low, but might be a minute since I received nice big rolls of tape. Great value for your money!
5.0 out of 5 stars
By Heather *•* - Reviewed in the United States on June 17, 2019
Must have for use with heat press!
Love this tape! It is a must have if you make shirts, hats, or anything with htv or sublimation. (Or use a heat press for any reason) also if you do htv shirts or anything with htv and have diff layers to press you can use the same pieces of tape over and over. (I like to squeeze every penny out of a product lol) but I’ve never had an issue using the same pieces of tape I start with throughout layering all the colors on one shirt. will reorder when I need more!
5.0 out of 5 stars
By Amazon Customer - Reviewed in the United States on August 24, 2019
nathing
Dear Manager Jenefer I answer your request. The thermal film I ordered was quickly and well repacked. This film corresponds to the quality declared on the seller’s website. but this impression is primary, I just started using it. From experience I can say that there shouldn’t be any problems with it As long as I am satisfied with the quality. I hope for our further cooperation. Sincerely, N. L.
5.0 out of 5 stars
By Plain Jane - Reviewed in the United States on December 22, 2019
Why I use heat press tape.
I have used this product for over a year and I did not have this problem n hand when heat pressing a child t-shirt. I immediately had to order this product. I prefer this width. It holds the vinyl without needing any larger size. I also use a small piece when I want a special distance below the neck, or on the sleeve, or other uses. This is an important product for me when I working with vinyl.
5.0 out of 5 stars
By TGG18 - Reviewed in the United States on June 25, 2020
Happy with this purchase
So far I have no complaints. I have been using this with HTV with my heat press on fabrics to stabilize designs before pressing. I can use the pieces of tape multiple times before they lose stickiness which is a plus. I haven't seen any residue or anything on my garment after using the tape. There's not a ton to say about the tape other than it is doing it's job effortlessly and successfully. Highly recommended
5.0 out of 5 stars
By GEvans - Reviewed in the United States on November 15, 2018
This tape is great!
It's really indispensable when sublimating. Now I just wish I could find a tape dispenser for rolls of this diameter. It would make things much simpler. Also, so far this seems to be a very good tape width for general use. Not too wide, and not too narrow.
Top Reviews
5.0 out of 5 stars
By Carmie - Reviewed in the United States on February 13, 2019
Great for HTV and heat press!!!
Wish I had discovered this stuff earlier! I used today for the first time and it made making shirts with HTV and my heat press much easier. I was able to tape different colors for the same shirt together making the process quicker. Tape was easily removed and left absolutely no residue on my shirt. Also, some HTV transfer sheets (like for glitter) aren’t very sticky. I will be able to tape the sheet down to my shirt to ensure it doesn’t move during transport to the heat press.
4.0 out of 5 stars
By TerriJ - Reviewed in the United States on May 5, 2019
Not as pleased as I was hoping I would be
For many years now I have used the blue colored heat transfer tape. It has always worked well and given me no trouble. I purchased the gold colored tape because I felt the bright contrast may be easier to see. Well, yes, it's easier to see but the tape is so thin it is very difficult to remove once heated - and not heated for that matter. I think I also prefer a wider tape. I obviously didn't check the width before purchasing. I suppose I will throw it in my "in case I run out" drawer and go back to the blue heat tape. Not the seller's fault, I just prefer a thicker tape as it's easier to remove after being heated.
5.0 out of 5 stars
By Brenda w - Reviewed in the United States on November 12, 2019
Works perfectly
Worked perfectly. Stayed in place and was just like a Teflon sheet very heat resistant. Works perfectly with my cricut mini press to keep things in place while pressing on small items like baseball caps. Will order again when I’m running low, but might be a minute since I received nice big rolls of tape. Great value for your money!
5.0 out of 5 stars
By Heather *•* - Reviewed in the United States on June 17, 2019
Must have for use with heat press!
Love this tape! It is a must have if you make shirts, hats, or anything with htv or sublimation. (Or use a heat press for any reason) also if you do htv shirts or anything with htv and have diff layers to press you can use the same pieces of tape over and over. (I like to squeeze every penny out of a product lol) but I’ve never had an issue using the same pieces of tape I start with throughout layering all the colors on one shirt. will reorder when I need more!
5.0 out of 5 stars
By Amazon Customer - Reviewed in the United States on August 24, 2019
nathing
Dear Manager Jenefer I answer your request. The thermal film I ordered was quickly and well repacked. This film corresponds to the quality declared on the seller’s website. but this impression is primary, I just started using it. From experience I can say that there shouldn’t be any problems with it As long as I am satisfied with the quality. I hope for our further cooperation. Sincerely, N. L.
5.0 out of 5 stars
By Plain Jane - Reviewed in the United States on December 22, 2019
Why I use heat press tape.
I have used this product for over a year and I did not have this problem n hand when heat pressing a child t-shirt. I immediately had to order this product. I prefer this width. It holds the vinyl without needing any larger size. I also use a small piece when I want a special distance below the neck, or on the sleeve, or other uses. This is an important product for me when I working with vinyl.
5.0 out of 5 stars
By TGG18 - Reviewed in the United States on June 25, 2020
Happy with this purchase
So far I have no complaints. I have been using this with HTV with my heat press on fabrics to stabilize designs before pressing. I can use the pieces of tape multiple times before they lose stickiness which is a plus. I haven't seen any residue or anything on my garment after using the tape. There's not a ton to say about the tape other than it is doing it's job effortlessly and successfully. Highly recommended
5.0 out of 5 stars
By GEvans - Reviewed in the United States on November 15, 2018
This tape is great!
It's really indispensable when sublimating. Now I just wish I could find a tape dispenser for rolls of this diameter. It would make things much simpler. Also, so far this seems to be a very good tape width for general use. Not too wide, and not too narrow.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
