Zeapon Micro 3 E1000 Double Distance Motorized Camera Slider,42''/107cm Travel Distance,DSLR Slider with Carrying case, Motor Quick Switching, 10-26Lbs Payload and Adjustable Sliding Damping Design

Features

• Hellaflush Design: 4 KG Payload: Micro3 uses a new 45-degree angled track design, inspired by the Hellaflush car modification, resulting in a stable platform with an amazing 4 kg payload in any direction and the horizontal load is up to 12 kg
• Adjustable Damping: The Fluid Damping technology allows you to create extremely smooth and consistent camera movements. The damping knob can be adjusted from 1 to 5 resistance from low to high and solves the problem of stucking caused by low temperatures
• Fast Switching Motor: The slider and motor are independent and driven by a high-strength stainless steel Arri gear. The motor can be assembled easily by using the quick-release screws. It's effortless to switch between M/E Mode to handle any production
• Triple Support System: With standard screw ports added to both sides of the slider, the Zeapon Micro3 is mounted upside down, it comes with tripod support rods, no need to purchase them separately, preventing the slider from tilting when moving to the end
• After Service: If you have any questions or concerns regarding products, our friendly and knowledgeable customer service team is always ready to assist you in any way possible.

Description

Micro3 is not just an evolution, its a re-V-olution! The new V-shaped track design is inspired by the popular car modification culture - Hellaflush. Just like those modified cars with negative camber and lowered suspension, the Micro3 slider has exterme low centre of gravity and the ability to handle very high payload. Inspired by the design of Hellaflush car modification, Micro3 uses a new 45-degree angled track design. It disperse weight to both vertical and horizontal direction, resulting in a stable platform with amazing 4 kg payload limit in any direction and the horizontal load is up to 12 kg. The vacuum structure combined with special damping grease not only provides a solid damping smoothness, but also allows stepless adjustment of the slider movement resistance. The damping setting can be adjusted between 1 and 5. The higher the number, the higher the resistance. The slider body and motor are independent and driven by a high-strength stainless steel Arri gear. The motor can be integrated and removed easily by using the quick release screws. It’s effortless to switch between a manual and motorised slider to handle different shooting conditions. The stress point of the tripod support rods has been shifted from the center of the slider to the support components at both ends where standard 1/4" and 3/8" screw ports are added as well. You can have the Zeapon Micro3 mounted upside down or you can mount the Micro3 on a car easily. The entire Micro3 Series sliders come with tripod support rods, no need to purchase them separately. The Zeapon Micro3 comes with many improvements and upgrade that addressed every single area. The belt lock uses a large-diameter mechanical knob, no need to worry about damaging the belt or triggering it by accident. ZEAPON's unique nesting screw is compatible with both 1/4 and 3/8 inch standard, just press the screw and rotate it slightly, then the screw can be fully hidden to avoid scratching other devices and camera bags. The mounting base of Micro3 is approximately three times the size of the previous generation, it significantly increased the contact surface and allows your camera to be installed more securely and improves the stability. When your battery runs out of power, or you need extreme long shooting time, you could power the Micro3 using either a power bank or a power adapter with 5V and 2A standard. The extremely smooth of the Micro3 will fearlessly amplify the probe lens against jitter. Double distance slide can hide itself extremely well, so that the equipment is not easy to out of camera wear. Micro3 series slider powerful motor allows you to film vertically, 4kg payload actually takes a huge advantage in most gear setups. Using Zeapon lab to set the waypoints and speed up your motorized slider. With one click, your slider is ready to work, once connected you can operate the slider within 15 meters wirelessly. Start a timelapse, just this simple, connect shutter release cable with slider, and you are good to go! More functions wait for you to explore! ZEAPON, was founded in 2016. Invented the Micro series double distance camera sliders, which once became Internet-famous product reviews by photographers and filmmakers, and television professionals around the world, also hold many fans on Facebook and Youtube. So far, it has formed an intelligent multi-axis shooting system based on motorized controlled sliders and motorized pan and tilt heads.

Color: Black

Brand: ZEAPON

Compatible Devices: Camera, DSLR, Smartphone, iPhone

Item Weight: 15 pounds

Folded Size: 14.135 inches (L) x 6.5 inches (W) x 2.5 inches (H)

UPC:

Number of Items: 1

Brand: ZEAPON

UPC: 719081556244 719081556206

Number of Items: 1

Built-In Media: Micro 3 M1000 slider ×1, Micro 3 Motor ×1, Micro3 M1000 Carring case ×1, Micro3 M1000 tripod support rods ×2, Micro3 Motor Carring case ×1

Item Type Name: Camera slider.

Manufacturer: ZEAPON

Model Name: Micro3 E1000

Manufacturer Part Number: SD-E6

Warranty Description: 1 YEARS

Model Number: SD-E6

Color: Black

Compatible Devices: Camera, DSLR, Smartphone, iPhone

Screen Size: 107 centimeters

Media Type: SupportingEquipment

Viewfinder Type: LCD screen

Water Resistance Level: Not Water Resistant

Item Weight: 15 pounds

Folded Size: 14.135 inches (L) x 6.5 inches (W) x 2.5 inches (H)

Maximum Weight Recommendation: 26 pounds