Search  for anything...
Welacer

DTF Transfer Film Roll 11.8 Inch x 328 FT for Sublimation Double-Side Clear Pretreat Sheets, PET Heat Transfer Paper for Epson Inkjet Printer Direct Print on T Shirts Textile

    • Based on 1,134 reviews
Condition: New
Checking for product changes
$66.99 Why this price?
Save $8.99 was $75.98

Buy Now, Pay Later

As low as $11.17 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

Eligible for Return, Refund or Replacement within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Sunday, May 19
Order within 20 hours and 34 minutes
Available payment plans shown during checkout

Recently Viewed

Size: 11.8inch x 328FT Roll


Features

  • INDUSTRY FAVORITE & ALL FABRIC ALL COLOR. The UV DTF transfer paper sheets work for all colored garments including Dark Black Light White Color etc, also for all material fabric including Cotton, Jeans, Leather, Blends, spandex, nylon, Canvas, Polyester etc. An industry favorite products.
  • THICK DOUBLE SIDE & COLD AND HOT PEEL. The white DTF transfer film Sheets Starter Kit is thick double side, evenly coated, so suitable for all DTF printer. For Cold and Hot Peel, the effect of cold peel is better than hot peel so far.
  • NO WEEDING & EASY TO USE. You can create, print and cut to size you want, NO WEEDING. The DTF transfer film for sublimation matte can be Direct printed on any blanks such as T-shirts, pillows, caps , gloves, sneakers etc)
  • COMPATIBLE & VIVID COLOR. The DTF DTG transfer film Sheets work with Epson Inkjet Printers DTG DTF Printers L1800 F2100 ET4700 XP15000 Printer, work with DTF transfer ink and DTF powder. Vivid, Clearly color.
  • SAVE MONEY AND TIME & SERVICE. The direct to vinyl DTF film iron on does not have to be pretreated, save your money and time. Please apply full refund if any unsatisfied, we will try our best to make you satisfied.

Description

Welacer DTF Transfer Film Roll 11.8inch x 328 FT for Sublimation Double-Side Clear Pretreat Sheets, PET Heat Transfer Paper for Epson Inkjet Printer Direct Print on T Shirts Textile

Brand: Welacer


Color: Clear


Paper Finish: Coated


Sheet Count: 220


Paper Weight: 120


Manufacturer: ‎Welacer


Brand: ‎Welacer


Item Weight: ‎8.18 pounds


Package Dimensions: ‎12.4 x 5.79 x 5.71 inches


Color: ‎Clear


Size: ‎11.8inch x 328FT Roll


Paper Weight: ‎120


Paper Finish: ‎Coated


Manufacturer Part Number: ‎DTFF08US


Date First Available: December 7, 2023


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Sunday, May 19

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • This and this alone!
Size: A4 25 Sheets
This product is very consistent! Especially for my Epson 2850 printer. You will need DTF powder for the sublimation ink to have its proper effect. Soon as the print comes out, you should coat the design on the film with tour DTF powder of choice. This powder needs to cure on the ink which is done by the powder heating up on the ink. I use a small toaster oven on the broil setting so only the top heating element turns on. (Don’t Use Bake Setting) the transfer rate is amazing. I’ve tried another film that offered more sheets at a discounted price and regretted it. Now I’m back to this and won’t be switching back. I just order the 100! Sheets pack. Hope this helps. Do NOT use regular ink for this film. Sublimation Ink only. I use Hippo Ink. Great product! ... show more
Reviewed in the United States on February 11, 2024 by Melanie Jackson
    • Works GREAT with sublimation inks - See Tips and Samples
Size: A4 25 Sheets
Review Image by Zulema - PRINTSMART, LLC Zulema - PRINTSMART, LLC
Review Image by Zulema - PRINTSMART, LLC Zulema - PRINTSMART, LLC
Review Image by Zulema - PRINTSMART, LLC Zulema - PRINTSMART, LLC
Review Image by Zulema - PRINTSMART, LLC Zulema - PRINTSMART, LLC
Review Image by Zulema - PRINTSMART, LLC Zulema - PRINTSMART, LLC
Review Image by Zulema - PRINTSMART, LLC Zulema - PRINTSMART, LLC
Review Image by Zulema - PRINTSMART, LLC Zulema - PRINTSMART, LLC
Review Image by Zulema - PRINTSMART, LLC Zulema - PRINTSMART, LLC
Review Image by Zulema - PRINTSMART, LLC Zulema - PRINTSMART, LLC
The product will most likely produce the best quality with a DTF printer, but they are extremely expensive for the amount of fabric printing I do. I tested using an Epson Sublimation printer and after perfecting the temperature and pressing time, I was super happy with the results. So, contrary to manufacture's statement, which reads, "Must use with DTF ink. Regular ink, sublimation ink can not be used, with the same brand DTF transfer film, DTF ink and hot melt powder, the transfer effect is more perfect." While that may be true, for a more "perfect" transfer, I disagree entirely that "sublimation ink can not be used". YES! Sublimation ink can be used. :-) What did I use: Epson SureColor F170 sublimation printer with genuine Epson Sublimation inks WELACER DTF Transfer Film Sheets Godora Transfer Powder (DTF White Powder Hot Melt Adhesive) - You can not skip this step! VEVOR Heat Press (12" x15") Tips: PRINTING ON THE TRANSFER SHEETS: This slowed down the process but made it fool-proof 100% of the time. These sheets are very thin. Putting a single (or multiple sheets) in the printer tray caused a misfeed, and printing started midway down the sheet which ruined that sheet. When that happened, I didn't want to ruin any more sheets, so I taped the top of the sheet to copier paper (glossy side of transfer sheet against the paper so it prints on the dull side of the sheet). I used only a sliver of tape (about 3/8" in length) on the top left and top right. I place only one set of taped sheets at a time in the tray. It fed perfectly each time. I prepared all sheets with the copy paper so it was ready to use when I needed it) APPLYING THE HOT MELT POWDER: Immediately after printing, carefully and quickly remove the copy paper, lay the transfer sheet on a flat surface (I use a 3" deep 11 x 14" bin), shake the transfer powder over the entire printed area, fully covering it. Let it rest on top for a few seconds; at least 15. Grab the sides of the sheet firmly, lift the sheet and curl the sheet, allowing the powder to roll from side to side, top to bottom over the printed image; don't agitate, you might smear the printed image. Slide all excess powder off the sheet and into the bin. Holding the sheet firmly along the edges, Gently tap the edge of the sheet inside the bin to release remaining excess powder. Visually examine the sheet. If you see excess powder on the non printed areas, gently tap again. CURING THE POWDER before the transfer: The powder needs to "set". There are special ovens for this, but you don't need the additional expense. I use the heat press, about an inch away from the platen, and place the transfer sheet (of course, powder side up) and leave it under there (380 degress) for 3 minutes. PLEASE TEST YOUR OWN SETTINGS! During these 3 minutes, I empty the bin of the powder, into a small plastic container so I can re-use it. I see people (on DIY videos), emptying it back into the original container. Why? You might end up mixing unwanted particles with the unused powder. In a small container you can see and remove any unwanted particles. But, that's just me. TRANSFER IMAGE ONTO SUBSTRATE: I highly recommend you "sacrifice" an actual garment that you plan to transfer onto, and test small areas at a time, multiple times on the test garment until you find the best temperature and timing. For my equipment, 380 degrees, at slightly more than medium pressure for 40 seconds yielded the very best results. Always press the garment first for about 6 seconds to remove wrinkles and moisture. Even though the powder has been baked, it can still be damaged if touched. So, eyeball the placement carefully before placing the transfer sheet onto the garment. It can be very slightly nudged if you need to reposition it, but I would not recommend it. REMOVING THE TRANSFER SHEET. Welacer states that the transfer can be removed while it is still hot (or cold). This may be true for DTF inks, but I found that for sublimation inks, WAIT until it is fully cooled off. Removing warm tugs at the fabric and takes a bit of effort to remove. It generally doesn't damage the image, but it will pull on the fabric and can nick off part of the image. When fully cool, it lifts off effortlessly, and no tugging at the garment. Important to note about this Seller: This is my second order of this product. I needed more sheets to finish a job and was thrilled that they were offering a nice discount this time around. Unfortunately, the discount was most likely offered because ALL OF SHEETS had fingerprint marks along two of the edges. Luckily, it did not interfere with print area, but, I am extremely disappointed. I would rather have paid full price if I thought the discounted product would be defective. The worst part: They inserted the sheets INCORRECTLY into the cellophane wrapper. There's a sticker on the wrapper that states "Print Side". The print side is dull and the non-print side is shinny. However, the difference between the 2 is very slight, so you have to view it at an angle to make sure. Well, these were inserted wrong. Had I NOT already worked with my first order (which was packaged correctly) I would have ruined a sheet or two. This would have been disastrous for a first-time user. There are other DTF Transfer sheets out there... I will try others before I trust this vendor again. ... show more
Reviewed in the United States on April 8, 2023 by Zulema - PRINTSMART, LLC Zulema - PRINTSMART, LLC
    • Amazing Quality
Size: 13inch x 328FT Roll
I have tried many different films I was needing some film fast wasn’t sure if this would be good or not and once I got it in I was incredibly happy with it. So, after purchasing over 10 rolls now this is all I buy and won’t buy. The color is opaque enough for my printer to see it and its hot peels beautifully. And my colors are incredible. You won’t be disappointed. I don’t write a lot of reviews but this product it definitely worth sharing about how happy I am with it. ... show more
Reviewed in the United States on March 6, 2024 by Jake
    • Impress
Size: A4 25 Sheets
Awesome it does what it says works very well
Reviewed in the United States on December 6, 2023 by Jacqueline
    • Very good dtf
Size: 8.5x14 100 Sheets
Review Image by kyle dodson kyle dodson
Love loves direct transfer film thank you amazon
Reviewed in the United States on March 11, 2024 by kyle dodson kyle dodson
    • pooled ink and did not work at all.
Size: A4 100 Sheets
I thought I was doing something wrong when using this product. I have an epson xp 15000 I use for DTF. I printed on both sides to make sure and both times my ink just pooled and mixed together. I tried a different film and had no issues.
Reviewed in the United States on February 23, 2024 by Angela Aguirre
    • Surprisingly Great Film! Better than other DTF sites
Size: A3 100
This was some great film. I've always been leary of buying film on Amazon because of the reviews I saw when DTF first came out. BUT THIS FILM here is probably the best I've ever used. It melts the powder perfectly and Peels off the shirt as smooth as butter once you've pressed it. There is ZERO resistance when peeling, unlike other films that feel like I'm going to peel the whole print off with the film. I've never seen any leftover Ink or powder left on the film and there hasn't been any moisture retained in the ink either. This was a great buy and I will definitely get some more! ... show more
Reviewed in the United States on December 3, 2023 by Rose Simon
    • Easy to use
Size: A4 100 Sheets
I’m still learning but I’ll be purchasing more in the future
Reviewed in the United States on February 4, 2024 by Pam

Can't find a product?

Find it on Amazon first, then paste the link below.