Superpunch Water Soluble Topping for Embroidery, Clear, 9 in x 25 yd

Ideal to leave your stitches on top of your garment. This product works by holding the stitches above the fabric during the embroidery sewout process. Applied on towels, polar and other soft sinking fibrous fabrics. Available in different sizes: - 9" x 10 yards roll (White) - 9" x 25 yards roll (White) - 19" x 25 yards roll (White) A TRUE INSTANT WASH AWAY. This stabilizer soft and sheer is a complete wash away stabilizer, leaving no residue. It dissolves easily in tap water leaving to a far tighter definition, while being less messy than firm stabilizers, as fibers hold stitches. Eau Gone is a fibrous wash away stabilizer for free standing lace, fleece and pashmina. Spray water after application and it dissolves. Ideal for lingerie, baby clothing, free standing lace (FSL), Emblems, Napkins, etc. Available in different sizes: - 12" x 10 yards roll (White) - 12" x 25 yards roll (White) - 15" x 25 yards roll (White) - 15" x 100 yards roll (White) - 19.25" x 25 yards roll (White) This product is NOT an instant wash away. It will wash away after a few washes and dissolves faster than a regular tear away. Stitch and rinse is a water soluble tear away that is designed for open embroidery on light cottons and linens. When the embroidery is finished, the excess tears easily away from the stitches and the rest dissolves in water with the first wash. Only some of the stabilizer dissolves leaving the non soluble fibers under the stitching to give the embroidery the support it needs to keep the design looking sharp and crisp throughout the life of the garment. Available in different sizes: - 11.5" x 10 yards roll (White) - 14" x 25 yards roll (White) Measure the area you need and cut with the help of scissors. Place on top of the piece to be embroidered and start embroidery. After embroidery is done, peel off excess stabilizer by hand. Rub gently with a damp cloth or spray water to remove the rest. Cut away stabilizer must be removed by cutting it away and the rest behind the stitch will remain on the fabric for the life of the design. Cut away stabilizer is considered the most stable stabilizer. It is typically recommended for unstable and stretchy fabric such as knits and high-stitch count design. Tear away stabilizers are used when you wish to remove most of the excess stabilizer from the back of the project after embroidery. It was recommended to be used on woven fabrics that have no stretch like quilted fabrics, 100 percent cotton, poly cotton fabrics, linen, vinyl, leather… Fusible Iron On stabilizer has a side with shiny coating which can be ironed to the wrong side to the fabric, so it can be fix to the fabric without a hoop. Using Fusible Iron On stabilizer will prevent stretching of the fabric during the hooping process. No Show Mesh is also a kind of cutaway embroidery stabilizer which will remain forever fixed to your fabric but it is sheer and semi-transparent which is not for very heavy design. It is extremely soft for baby garment and some fabric when soft is a very important consideration.