TotalBoat 2lb Density Expanding Closed Cell Polyurethane Boat Foam - 2 Qt

Features

• LIGHTWEIGHT, TWO PART POLYURETHANE FOAM: Ideal for adding buoyancy, thermal insulation, soundproofing, and filling gaps or voids; for nonstructural applications only; tested in accordance with U.S. Coast Guard Regulation # 33 CFR 183.114
• EASY TO USE: Liquid urethane pour foam has a simple 1:1 mix ratio, expands rapidly & hardens in place in about 5 min. at 70-80F; to build multiple layers for filling under boat decks, pour expanding foam in separate batches
• 94% CLOSED CELL FOAM: Perfect for marine applications; resists water absorption and damage from gas, oil or solvents; once cured, foam can be coated with polyester, epoxy or vinyl ester resin; can also be easily cut or carved to shape
• IDEAL WORKING TEMPERATURE IS 75-85F; proper temperature, timing, mixing and venting are critical for proper foam expansion; below 75F expansion decreases; after mixing, the foam expands rapidly and becomes rigid, so clean the surface in advance and be ready to pour
• AVAILABLE IN A 2 QUART KIT AND A 2 GALLON KIT; Yield: 2 Quart Kit 2 cubic ft; 2 Gallon Kit 8 cubic ft; Flotation Range for 2lb foam: 75 lbs per mixed 2 quart kit, and 300 lbs per mixed 2 gallon kit; shelf life is 6 months from date of manufacture

Description

Be safer and more comfortable on your boat with Total Boat Two Part Polyurethane Marine Expanding Foam. This US Coast Guard compliant pour foam is commonly used to add buoyancy to keep a boat afloat if hull integrity is compromised. Its closed cell foam structure enables it to resist water absorption for many years, making it ideal for filling pontoons and cavities in kayaks and beneath boat decks. 2 Lb. density expanding urethane foam kit mixes to form a fast-setting, pourable liquid foam that cures to a rigid, lightweight material that's also great for filling gaps, soundproofing, and providing thermal foam insulation and nonstructural support in a variety of marine, household and art applications. Two part flotation foam has a simple 1:1 mix ratio that makes it easy to use. Warm conditions of 75-85°F are very important, as are accurate measuring, thorough mixing, and proper venting of the area where the foam is to be applied, because it expands tremendously by volume. Just mix one part resin and one part activator, stir vigorously for about 25 seconds to mix completely and pour immediately into the prepared area. Expanding foam will distribute itself evenly - even into irregularly shaped areas. Cured foam hardens into shape, with minimal shrinkage, and can be cut to shape easily. Once fully cured, any areas exposed to sunlight should be laminated or painted over with polyester, epoxy or vinyl ester coatings. For best results filling larger areas, pour in multiple layers to allow proper cure and maximum strength bonding between layers. Always wear proper eye, face and clothing protection when you mix and pour two part marine foam. Compare to Evercoat Marine Foam-It, FGCI Polyurethane Foam, Polymer Planet Liquid Urethane Foam, Morris Materials Urethane Pour Foam, True Composites Pour Foam, and System Three Flotation Foam for boats. All TotalBoat products provide great value and great results. 100% made in the USA.

Material: 2-Part Polyurethane

Brand: TotalBoat

Recommended Uses For Product: Boatbuilding & Repair, Casting, Cosplay, Craft, Fiberglass Plug Making, Gap & Void Filling, Marine Flotation, Sculpture & Prop Making, Sound Dampening, Thermal Insulation See more

Global Trade Identification Number: 97

Number of Packs: 1

Brand Name: TotalBoat

Global Trade Identification Number: 97

Number of Packs: 1

Manufacturer: TotalBoat

Number of Items: 1

Item Highlight: 2-Part Pourable Foam; Marine Flotation, Insulation & Filling Voids; Use in Molds or Under Boat Flooring; Coast Guard Approved

UPC: 811932022097

Unit Count: 64 Fluid Ounces

Included Components: 1 Quart Resin, 1 Quart Activator

Item Type Name: polyurethane foam

Model Number: TB-FOAM

Manufacturer Part Number: TB-FOAM

Coverage: 2 cubic feet (2 Quart Kit), 8 cubic feet (2 Gallon Kit)

Material Type: 2-Part Polyurethane

Recommended Uses For Product: Boatbuilding & Repair, Casting, Cosplay, Craft, Fiberglass Plug Making, Gap & Void Filling, Marine Flotation, Sculpture & Prop Making, Sound Dampening, Thermal Insulation