Search  for anything...
Sovol

Sovol SV06 3D Printer Open Source with All Metal Hotend Planetary Dual Gear Direct Drive Extruder 25-Point Auto Leveling PEI Build Plate 32 Bit Silent Board Printing Size 8.66x8.66x9.84 inch

    • Based on 524 reviews
Condition: New
Checking for product changes
$249.00 Why this price?
Save $24.99 was $273.99

Buy Now, Pay Later

As low as $41.50 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: Only 10 left in stock, order soon!
Fulfilled by Amazon
Arrives Saturday, May 25
Order within 23 hours and 44 minutes
Available payment plans shown during checkout

Size: SV06


Features

  • Classic I3 Structure Combines with Sovol New DesignDifferent from most 3D printers run by wheels in the market, SV06 has a classic I3 structure which avoids wear and tear of wheels and multiple replacements and it is widely applied into industry. We did something new to make it more applicable for household use. Modular design allows you to assemble SV06 within 5 steps easily. Working with SV06 Klipper screen (does not come with the printer, need to purchase additionally), SV06 can reach a fast and upgraded printing speed of 250mm/s.
  • Planetary Dual Gear Direct DriveSovol self-developed All Metal Direct Drive Extruder with planetary dual gear set, provide SV06 with higher drive ratio and a lighter motor, helps to achieve more accurate extrusion. Add large external knob for easy feeding.
  • 300C High Temp PrintingAll metal Hotend Setup makes it possible to print up to 300C. No need to deal with PTFE replacement anymore, and even no need to flash the firmware, you can print with different materials better and more easily. ( Enclosure is still needed if you want to print over 260C.)
  • 25-point Auto LevelingWith inductive sensor, detect the metal print bed through 25 points automatically and compensate the unevenness of the heated bed. The fast, smart, precise detection and compensation help you to get the bed leveled perfectly and get an fantastic first layer. Note: Set the height of initial layer to 0.3mm when you slice that would help you to printer better initial layer and make the filament stick to the plate better.
  • PEI Build PlateThe flexible PEI-coated build plate with mesh surface design makes the prints can be removed easily without any tools. 220*220*250mm print size, enough for daily use and household use.
  • Self-developed 32-Bit Silent BoardWith TMC2209 drivers, makes the printer works stably and quietly. UART mode is available, so that more modifications can be done easily for advanced users.
  • Customer ServiceSovol 3d printers come with one-year warranty and lifetime technical support. Any question on Sovol SV06 3d printer, just click "Ask a question" through our storefront's page, report an issue through the "Your Orders" page. We will fast respond within 24 hours and try our best to resolve your every issue.

Brand: Sovol


Material: Aluminum


Color: Black


Product Dimensions: 15.3"D x 19.6"W x 24"H


Compatible Devices: Laptop, Smartphone


Product Dimensions: 24.02 x 19.29 x 14.96 inches


Item Weight: 23.2 pounds


Item model number: SV06


Date First Available: October 20, 2022


Manufacturer: Sovol


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Saturday, May 25

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • At this price point, best build volume, quality, speed and features in a very respectable package.
Size: SV06 Plus
Review Image by Ken Keene Ken Keene
Review Image by Ken Keene Ken Keene
Review Image by Ken Keene Ken Keene
Review Image by Ken Keene Ken Keene
Review Image by Ken Keene Ken Keene
Review Image by Ken Keene Ken Keene
Review Image by Ken Keene Ken Keene
Review Image by Ken Keene Ken Keene
Review Image by Ken Keene Ken Keene
Review Image by Ken Keene Ken Keene
The media could not be loaded. Short(ish) version: I'm a medium-level 3D printing enthusiast, 3 years of mixed experience/results with an Ender 3 since 2020. I picked up the SV01 Pro in October 23 and it was so easy to build and use, but I wanted more build area, plus a second printer so I could run concurrent print jobs. I did a fair bit of research and determined the SV06 PLUS to be a solid value. Purchased this guy November of 23, and holy cow was that it a good decision. I mean, here are some of the important boxes this printer checks for me: 1) More build volume 2) Higher print speed capable 3) Self-leveling (not perfect but shockingly good!) 4) Pause/Resume when it runs out of filament (more details below how this saved my six-day print) and 5) In general terms, for my uses, this was a wonderful next step in my 3D printing hobby. Honestly, I can say my new printers have made printing FUN again, and I get to spend time printing again instead of constantly calibrating in between prints. More details: I'm not here to trash Enders, especially since my Ender got me into the hobby (January 2020). I did however eventually get tired of the bed leveling, failed prints, and constant babysitting. To tell the truth, I was hardly printing any more come 2023. My coworker was talking about this SV01 Pro he got cheap and how reliable it was. I said why not, got myself an SV01 and was just instantly having a GREAT time! My only problem - I had the desire to print larger stuff. I joined the Sovol groups on Reddit and FB, and did a lot of reading. The clear consensus was that the SV06+ is one of the best bang for the buck printers available in general. I chose the standard (read: non Klipper) model. Klipper is a whole other (and interesting) topic but I'm not looking to address that in this context, I may tinker with it on my Raspberry Pi later, but I'm just running things stock. So the SV06 arrives, and within about 30 minutes I had assembled it and started the leveling process. As soon as that was done I connected my Raspberry Pi with OctoPi and set up a printer profile so I could print from my PC instead of using the SD slot. I'll go ahead and mention the con I have with this printer because this is where you'll notice it too: The power supply has a significantly loud fan. It's not a deal breaker for my situation because my printers are in the basement, but trust me about the noise of the power supply in case that would be a problem for you. Anyway, It's been about 4-5 weeks of non stop printing for me. I've shared several photos, and one video for this review. I printed a cool marble track model but should have scaled it up in size because it would only fit smaller ball bearings. Turns out the SV06 was big enough to increase the model to a size where I could use regular marbles! The model took up most of the build volume on the SV06 and would provide a great stress test. This beast was a 6-day print and on day 4 when the spool of filament ran out, the filament sensor on the printer paused it automatically, moving the hot end to the side so I could mount a new spool and load the filament. Then I hit resume (holding my breath because I hadn't actually tried this before) and it just picked up where it left off. If you check my video, you can see the finished product which is pretty cool - it has an Archimedes screw that lifts the marbles back up where they randomly fall out to the 4 different tracks and down again. Summary - I hope this helps someone that's on the fence! Potential buyers should be aware of the loud fan on the power supply, but I can sincerely recommend my SV06 plus based on my experience. It's fast, it has been reliable, it successfully printed a monster print for me (hopefully the first of many), and it's been easy and fun to use. I still don't know if I'd call it a "beginner" printer, but I've been teaching my son and he picked it up right away. We're having a blast printing organizers and accessories for a bunch of our favorite tabletop games. Two thumbs up! ... show more
Reviewed in the United States on January 9, 2024 by Ken Keene Ken Keene
    • What a fantastic 3D printer this is!
Size: SV06
Review Image by dpgfla dpgfla
Review Image by dpgfla dpgfla
Review Image by dpgfla dpgfla
Review Image by dpgfla dpgfla
Review Image by dpgfla dpgfla
Review Image by dpgfla dpgfla
Review Image by dpgfla dpgfla
Review Image by dpgfla dpgfla
Review Image by dpgfla dpgfla
The media could not be loaded. I've just recently gotten back into 3D FDM printing and I was interested in purchasing a new printer that had some of the latest bells and whistles. When I began researching the purchase I became a bit overwhelmed due to countless brands, types, sizes and price ranges of printers that are on the market Needless to say I had a difficult time deciding on which to buy. I ended up stumbling across a video on youtube reviewing the Sovol SV06 which led me to finally make a decision. I thought the price was great and it has all of the features that I was looking for in a printer. I made the purchase on a Thursday night and it was on my doorstep by Saturday morning. Unboxing impressions - This printer comes packaged very well.... It's packaged so well that I didn't see the extruder assembly in the foam packaging and almost threw it out with the foam. All parts and pieces are tightly packed and there was no sign of possible damage to any of the components. Good job Sovol. Assembly impressions - Getting this printer put together and ready for printing was easy and quick (15-20 minutes). The instructions are simple to understand and the packages of screws used for assembly are all labeled based on which step you're on in the process. It couldn't have been easier. Getting it ready to print - The instructions show you how to level this bed properly using the mesh leveling. First you level the Z, which is automatic. Then you auto home and set your z offset using a piece of A4 paper. You then tell the printer to run mesh leveling which takes a couple of minutes but then you're ready to go. No more fiddling with knobs to level the bed (Amen!) Print quality impressions - Like most folks my initial print was the file that's included on the SD card - in this case it was the Boat Benchy. I'm not used to having perfect first prints on a brand new 3d printer but this one comes really close. There were a few whisps of filament on the model but nothing I'd go so far as to call "stringing" and one quick blast of heat from the heat gun made all whisps disappear. (Photo attached shows the whisps.) Ever since then I've had nothing but fantastic prints. Some models have whisps, others do not so I think it has more to do with me not having settings dialed in for the different filaments that I've been using. Regardless, the prints turn out looking great! After several successful prints on this machine I wanted to really test how level the bad was by loading it up and watching the first layer and I've attached an image to this review that shows just how well that layer went down. It was perfect and consistent across the entire bed. Adhesion was good throughout the entirety of the print and all parts turned out excellent (the parts in the photo were used to make the robot hand which is also pictured) The few failures that I've had on this machine have been while attempting to print with old Sainsmart TPU that's been sitting around my house for a year or two. I've attempted to dry it but I haven't yet to dialed in the settings but I expect that I'll have better results once I do. Filaments that I've used to print with so far - TPU, PLA, PLA+ and PETG. This is my first time attempting to print with PETG as I've always heard that it was a difficult filament to get quality prints with and surprisingly I've had NO issues and it turns out I really like printing with PETG now (go figure). Inland PLA+ has also been a really good filament to print with on this thing. The only minor thing that this printer is missing is a filament runout sensor. I've never had to rely on one but it's a nice feature to have, just in case. Sovol has addressed this with the release of the SV06 Plus that just recently came out and you bet I also ordered that printer for the larger build volume. . So, all in all I would absolutely recommend this printer to anyone. Ease of use and the high quality prints right out of the box makes this a great buy for beginners as well as those that have experience. For the price you can't go wrong with this machine. Mine has been going nonstop since I put it together! ... show more
Reviewed in the United States on March 30, 2023 by dpgfla dpgfla

Can't find a product?

Find it on Amazon first, then paste the link below.