Search  for anything...
SEALIGHT

SEALIGHT 9005/HB3 LED Fog Light Bulbs, 9005 Halogen Replacement Kit with Plug and Play, 6000K Xenon White, Pack of 2

  • Based on 4,448 reviews
Condition: New
Checking for product changes
$39.99 Why this price?
Save $6.00 was $45.99

Buy Now, Pay Later

As low as $9 / mo
  • – 4-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: 20 left in stock
Fulfilled by Amazon
Arrives Monday, Jun 30
Order within 7 hours and 51 minutes
Available payment plans shown during checkout

Recently Viewed

Size: 9005


Features

  • See Clearly at Night: SEALIGHT 9005 LED fog light bulbs are 6 times brighter than halogen bulbs, providing 6000K xenon white light that helps you see the deer and wild animals in advance while driving at night
  • 50000 Hours Lifespan: External driver separates the power supply and the bulb body, which helps dissipate the heat of the LED fog light beads, reduces light decay, and extends service life up to 5 years
  • 10 Mins Easy Installation: With non-polarity socket and plug and play design, you can finish installation in minutes without modification or wiring while replacing the stock bulbs. Warm tip: we are upgrading our packaging and you may receive one of two boxes randomly
  • 99% Vehicles Adaptability: External drivers ensures SEALIGHT 9005 HB3 LED fog bulbs compatible with 99% of vehicles system. Also work as HB3 LED fog bulbs. Wide compatibility works without annoying error code
  • Safe and Reliable: Focus beam pattern ensures higher on the passenger side to illuminate road signs and lower on the driver's side to prevent blinding other drivers. The wider and farther visibility increases response time, reducing risk of accidents

Brand: SEALIGHT


Light Source Type: /


Included Components: /


Wattage: 100 watts


Fit Type: Universal Fit


Manufacturer: ‎SEALIGHT


Brand: ‎SEALIGHT


Model: ‎9005


Item Weight: ‎12.3 ounces


Package Dimensions: ‎4.45 x 4.37 x 3.31 inches


Item model number: ‎9005


Is Discontinued By Manufacturer: ‎No


Exterior: ‎Painted


Manufacturer Part Number: ‎‎AHDX19005-E


Position: ‎Front


Bulb Type: ‎/


Special Features: ‎Waterproof


Mirror Lighting Type: ‎/


Voltage: ‎12 Volts


Wattage: ‎100 watts


Date First Available: September 18, 2017


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Monday, Jun 30

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Small hands would help, but with patience you can succeed!
Size: 9005
The lights work great and look great once installed. It is not technically hard to replace the factory OEM lights with these LED lights. I wish I had made a video to share on YouTube because there are none in good detail to show or explain the process, but I did not make one. So, I'll try to give an explanation of it... for someone with small hands, this task would be quick and easy for the Nissan Juke, but for someone like myself who wears at least a size X-Large gloves it was not easy to get my hands into the very tight spaces for changing the lights. And, I was only able to get 2 to 3 fingers through the housing holes to reach the lights, but I managed to complete the task. The task is the same for both the dim and the bright lights... You do not have to remove any parts of the front end (bumper, grill, ECT) like you do on some vehicle types and you do not have to remove the headlight housing. As you look under the hood, look down to where you will see the back of the plastic headlight housing. There you will see two large rubber caps which are about 3" diameter each. The dim light will be the rubber cap which is the higher one and directly behind where that dim light is positioned in the headlight housing. The rubber cap for the bright light will be a hair lower and angled towards the engine. Each rubber cap pulls off of the housing easily and will easily push back onto the housing once you are finished. The dim light is easier to reach than the bright light due to the tight space and the angle of the housing hole for the bright light. So, I started with the easy one (dim light) first. Reach inside the headlight housing hole and you will feel the wiring harness for the light. Do NOT pull on the wires! Connected to those wires you will feel the back of the light. Leave the wiring harness connected for now. The wires will pull out with the bulb once you pull it from the housing. Grip the back of the light bulb firmly with your fingers and twist counter-clockwise about 1/4 turn. Do NOT pull or push on the back of the light bulb at an angle! Twist it evenly and you will feel the light loosen from its locked position. Once it is lose, guide it out of its position straight back towards the back of the car. Once it is completely out of it's position, then you can easily pull the light bulb out of the housing with the wires still attached. The wiring harness is short, so you will have to hold it close to the housing hole. Now you will look at the wire connection of the bulb. You will see a small tab which you will press as you easily pull the wire connection from the bulb. If it does not separate easily, then you are not pressing the tab enough to release it from the locking notch on the bulb. Once you have disconnected the old bulb, set the bulb aside and do NOT let the wiring harness fall back into the housing. If the wiring harness falls back into the housing, you may have a heck of a time getting it back out again as it may be hard to reach without the aid of a small claw grabbing tool which I keep in my tool box. Now to connect the LED light, avoid touching the several tiny LEDs. The LED light will connect only one way, so you won't get it wrong. Align the small locking notch on the light wire with the locking tab on the wiring harness and slide them together until the tab clicks as it locks onto the small notch. Before you put the new light into the headlight housing turn on the headlights for only a few seconds to make sure the new LED light is working properly. If working, turn off headlights and insert the new light into the housing the exact opposite of what you did when removing the old light. As you insert the light into the housing also guide wiring harness and light wire into the housing, but be careful not to let the wires get into the hole of the light's position hole. Again, be careful to not touch the small LEDs AND be careful to not scrape the small LEDs against anything as you're inserting the LED light into the housing or into it's position hole. Once you have the light inside the housing and inserting it into it's locking position hole, make sure that you properly lineup the locking notches (notice that one of the 3 notches is smaller than the other 2) of the light with the notch slots of the light position inside the housing. Once you are sure it is lined up properly and is straight, firmly push the light straight into it's position (towards the front of the car) even further as you twist it clockwise to lock the light into it's position. MAKE SURE that you do NOT push the light at an angle as you're trying to lock it in! Once the light is properly secured into it's position try giving it a gentle wiggle and pull to make for sure that it is locked into it's position properly. Now turn the headlights on again for another quick check to make sure the new light is still working. If all is good, make sure all of the wiring is inside the housing as it will just rest there inside the housing. You can now press the rubber cap securely back onto the hole at the back of the housing. This process is the same for dim and bright lights on both left and right sides. If you are replacing both the dim and the bright lights, you will notice they are designed differently, so make sure you're using the correct type when installing the new light. There is no left or right bulb. If you're changing out the bright lights, when you turn on the headlights to test them, make sure your brights are actually turned on to the bright headlights position on the driver's controls. Good luck and remember that when changing the bright light, it will be more difficult than the dim light (mainly when trying lock in the light into it's position), but it can be done. To aid you in this task you might need a small mirror which you can adjust the angle and a flashlight, so that if need be you can shine the light onto the mirror as you look into the housing to see what you're trying to do, but you will not be able to look with the mirror at the same time your hand or fingers is/are reaching into the housing hole. ... show more
Reviewed in the United States on February 17, 2018 by Mike
    • Good product, not too difficult to install.
Size: 9005
Good product, not so hard to install. Brightness is at a decent level. Used for 3-4 month, will see how long they last.
Reviewed in the United States on June 22, 2023 by Joe Narapongporn
    • Love
Size: 9005
These have made such a difference when driving after dark. Would buy again for sure
Reviewed in the United States on November 7, 2023 by Amber Leffel
    • So far so good
Size: 9005
Great customer service I either ordered the wrong one or the car defaulted to the wrong one. But Customer service gave me a refund and then told me which one I actually did and made sure that I ordered the correct one. I would definitely buy from this company again.
Reviewed in the United States on October 11, 2023 by Jeff
    • Not Bright
Size: 9005
33% better than my 2013 Explorer OEM headlights. Better light down in front. Wish they had been a little brighter.
Reviewed in the United States on October 28, 2023 by BUZ
    • Fits perfectly
Size: 9005
Got these to upgrade my 2012 Prius. I had already replaced the low beams with a more expensive brand. The low beam halogens were burning out frequently, but the leds have lasted. So I decided to try this less expensive brand for the high beams. They went in easily, and seem to work fine. Satisfied so far. ... show more
Reviewed in the United States on October 3, 2023 by J. Alberts
    • Super bright!
Size: 9005
Oh my god. They are amazing!
Reviewed in the United States on October 15, 2023 by J E N I S E Dom. D.
    • Much Brighter
Size: 9005
Review Image by Rosie Rosie
The new light is much whiter and brighter than my old one. The picture really doesn't give it justice. I know nothing about cars but the installation was very easy. I watched quick minute n a half video on YT and got it done. The box contains a decent pair of gloves and everything you need. 10 out of 10. Would recommend. ... show more
Reviewed in the United States on September 12, 2023 by Rosie Rosie

Can't find a product?

Find it on Amazon first, then paste the link below.