Screen Replacement kit for iPhone 13 mini, 5.4" LCD Digitizer Assembly

1.Confirm Your Model Before ordering, check your exact iPhone model and confirm screen compatibility. 2.Inspect on Arrival Check the screen, flex cables and connectors for damage. If anything looks wrong, contact the seller before installation. 3.Read the Guide Read the full installation manual or watch the video for your model before you begin. 4.Test Before Final Assembly Follow the guide to connect and test the screen. Confirm display and touch functions before securing it. 1. Basic Step Follow iFixit tutorials for screen replacement (steps + safety tips). 2. Pre-Installation Must-Do Test the new screen by connecting it to the motherboard first to ensure it works. 3. Safety Warnings 1. Disconnect battery/power before removing the old screen (prevents motherboard short circuit). 2. Use correct screw sizes (wrong screws damage the screen). 3. Carefully transfer earpiece, ambient light sensor and proximity sensor from the old screen. 4. Troubleshooting If issues occur (no power, touch failure, flickering, lines): 1. Disconnect and reconnect the screen and battery. 2. Force restart: Volume Up → Volume Down → Hold Side button (10–15 sec) until Apple logo appears. 3. If problems persist, apply for free replacement. FAQ Q: Is it difficult to install? Can I replace it as a beginner? A: The package includes all professional installation tools. You can download the guide on the product page. Beginners can finish installation in 30–60 minutes by following the steps. Q: Is this screen fully compatible with my iPhone? A: It only supports the listed models. Please check your model in Settings > General > About before ordering. Q: Is it original quality? How about the display and touch? A: The screen has resolution, color and brightness close to the original. It supports True Tone and responds to touch smoothly without delay. Q: Will there be gaps, poor fit or Face ID failure after installation? A: Every screen is strictly tested for perfect fit. Install correctly, connect cables well and tighten screws, then Face ID works normally with no fitting issues. Q: What if installation fails or the screen is defective? A: If the screen is faulty or parts are missing, you can apply for a free replacement in your order. Give your phone a fresh new look!