Michigan Motorsports LS3 Rocker Arms - With Bronze Trunion Bushing Kit Installed L99 L76 L92 LS9 LSA

Features

• LS3 Rocker Arms with Bronze Trunion Bushing Bearings Professionally Installed These Performance LS3 Intake Rocker Arms feature offset fulcrum for use on LS3,L99 L76 L92 LS9 LSA "square port" cylinder heads. They have New Trunion Bearings Professionally Installed and include new bolts for installation.
• Whether you have a stock LS motor or a highly modified LS motor, replacing your rockers with a true roller bearing setup is highly recommended. The stock bearings have a tenancy to fail. These rocker arms are a must have for any aggressive heads and cam combo and are the same rockers we utilize on our 1,000 hp Turbo Motor.
• We utilize rocker arms and new LS rocker arm retro-fit trunion kit that replaces the cageless, loose OEM needle bearings and powdered metal trunion with a premium 8620 steel alloy trunion and caged roller bearings for added durability. The new design utilizes caged roller bearings that greatly reduce the possibility of the bearing failure experienced with stock LS needle bearings, which can send loose needles throughout the engine upon failure.
• This kit includes: 16 LS3 Series Rocker Arms 16 rocker arm trunnions- LS3-type retrofit 32 rocker arm bearings- LS3-type retrofit 32 rocker arm retaining rings- LS3-type retrofit 16 bolts for LS3 trunnion kit
• Install the upgraded rocker arms to the cylinder heads using the new socket head cap screws supplied. Be sure to rotate the trunion so that the flat recess side of the trunion's center hole faces upward (the socket head cap screw must seat against this recessed flat side of the hole). Tighten the cap screw to a value of 22 ft-lbs, following the OE installation procedure.

Description

This kit includes: 16 LS3 Series Rocker Arms 16 rocker arm trunnions- LS3-type retrofit 32 rocker arm bearings- LS3-type retrofit 32 rocker arm retaining rings- LS3-type retrofit 16 bolts for LS3 trunnion kit Install the upgraded rocker arms to the cylinder heads using the new socket head cap screws supplied. Be sure to rotate the trunion so that the flat recess side of the trunion's center hole faces upward (the socket head cap screw must seat against this recessed flat side of the hole). Tighten the cap screw to a value of 22 ft-lbs, following the OE installation procedure.

Manufacturer: ‎Michigan Motorsports

Brand: ‎Michigan Motorsports

Is Discontinued By Manufacturer: ‎No

Manufacturer Part Number: ‎24500-8+F7500-8+74300+assembly

Date First Available: February 17, 2018