iJDMTOY (2 Smoked Lens LED DRL Turn Signal Assembly Compatible with 07-17 Jeep Wrangler (White LED Vertical Bars as Daytime Running Lights & Amber LED Dots as Turn Signal Lights)

These are a "near miss" from being a good product. While they aren't all that expensive, for 40 bucks they were almost more hassle than they were worth. The instructions completely skip over how to wire the running lights in any meaningful fashion, and while they provided photos for simple tasks like unclipping the existing signal, they leave the wiring of the running lights to your own imagination. Suddenly, a 5-minute swap-out becomes as long as it takes for you to figure out the middle wire of the harness (white w/green on my 2014 JK) is the running light. I was able to stuff the wire into the center slot of the stock clip and squeeze 'em back together and worked fine. (Once again, it would have been simple enough to tell/show is in the instructions!). From there, the fitment issues are the next waste of your time... if you haven't thrown the lights back in the box for a refund at this point, kudos to you and your stick-to-it-iveness. The wiring out of the back for the relay and the driving light is in the worst possible spot, in the way of your stock signal connector, so prepare to be frustrated by that a tiny bit on the driver's side and quite a bit on the passenger's side. Speaking of the passenger's side, you will need to perform a little surgery on the light in order to get the connector to fit - I just used a razor blade to cut off the plastic stop that prevents you from turning the connector to the proper direction in order to allow the light to fit. Since these are purely aesthetic - c'mon, there is no real advantage to these over the stock ones, it's all for looks - the install should be just as easy as the clear lenses I installed last year which took less than 3 minutes including opening the package. These took about a half hour of unneeded frustration for a trivial install and were about 2 minutes away from being returned. Finished product looks good, but too much of a hassle.

These came today and package really well. To install take the top 6 screws out of the grill, then take the bulbs out of the parking lights. Then the grill will come right off. To get the old parking lights out push in clip and push light out of grill. Then take new lights and put them in, they are marked left and right. Mine fit good. Just took some pushing in to get the clips to lock. On the wiring take out the old bulb and insert in the clip in from the new lights. They come with resistors and all you do is plug them in, the resistors have tape on them, peel backing off and I stuck them on the frame of my jeep. To make the parking lights work I spliced the red wire in to the middle wire of the harness. (I turned on the parking lights and with a tester; I made sure that the middle wire was for parking lights. The black was ground and the right was blinker) When done I snapped in the bottom of grill and then put the 6 screws in the top and tested lights. I am happy with them. Parking lights light up the 2 vertical parts up white, the turn signals light up amber when on. Notice in the pics I had my 4 ways on and took a pic when they lit up, the Amber only lights up when turn signal is on and blinking Overall I would definitely recommend these item!!! Here is how I break down my star rating: 5 stars – I love it! It is awesome and I have no complaints whatsoever. I highly recommend everyone to purchase this product! You will not be disappointed! 4 stars – I like it, but it's not perfect. The issues with it though are very insignificant and have not swayed me from thinking it was a good buy. I would purchase again. 3 stars - It was okay. I like it well enough but I would probably not buy it again. That being said I am still happy I purchased it and will continue to use it. (I would also probably still recommend it with the disclaimer that it is decent but not amazing.) 2 stars – Well... this product is not so great. I am sure you could find a better one without much trouble (and probably at a similar price as this one.) 1 star – I don't the product. It does not stand up to my expectations and I wish I had not purchased it and (if applicable) will be returning it. I would not recommend it to anyone and think it was a waste of money.

They are Awesome. We have black grill inserts in our 2012 JK wrangler that have louvers that go up and down, so the look of these match really well. I wired the white LED lights that run up and down to turn on when the marker lights are suppose to be on. Because unless you do that or hook up a daytime running light setup they will never turn on. It is easy on the Wrangler There are three wires running to your stock marker light harness. The middle one is for the marker lights the black one on the end is the ground and the one opposite of the ground is the turn signal(colors of the wires may vary except for the ground it is black). So I spliced into the middle one and connected it to the extra single wire that is sticking out of the back of the fixture(not the one with the connector that's for the capacitor). I tried a few other led markers they sell on Amazon and sent them back most of them you have to chose either marker or turn signal because they use the same LEDs so when the headlights are on they won't blink.

So the lights work fine, wiring was not difficult but installing them was not so simple! The tabs did not lign up with the grill slots so I had to modify the grill also the tab latch did not catch so had to modify that as well! Also the wires for the hyper flash capasitor and DRL come out the back exactly between the light and grill bucket, so that had to be modified!!!!! Other than that I like them however its unxecusable that the fit was such a hassle!!!

These looked so cool and I was so excited when I had found them as I was looking for something that didnt look like a flower when on. Well after doing a test to make sure they worked wesadly couldn't install. They don't line up with OEM specs. I was super disappointed as I thought I had found the perfect light. I emailed the company to ask if there was a newer version that does and they responded there is not. They should do research and fix this issue so we could buy and use them.