Genmitsu 3020-PRO MAX V2 CNC Router Machine, Upgraded 3 Axis Engraver for Metal, Wood, Acrylic, PCB MDF, New Structure & Offline Controller & 6pcs Limit Switches, Working Area 11.8 x 8.1 x 3.1 inch
Condition: New
Buy Now, Pay Later
As low as
/ mo
Learn more
- – Up to 36-month term if approved
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Zip, Apple Pay, and Google Pay. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Thursday, Aug 6
Recently Viewed
Style: 3020-PRO MAX
Features
- Upgraded Structure: The 3020-PRO MAX V2 builds upon the solid foundation of its original frame with its robust 4040 Y-axis profile and one-piece machined and molded aluminum spoilboard with measurement scale. Now featuring an upgraded dual steel X-axis guide rail with an enclosed mold material and a new X-axis back plate, resulting in a significantly more stable design.
- New Z Axis Assembly: The integrated molded Z-axis C-mount significantly improves stability compared to the previous design.The new Z-axis structure makes upgrading the spindle easier than before.
- Convenient Setup: Optimized layout with the power supply conveniently installed on the backplate of the X-axis, maximizing workspace utilization. A pre-assembled XZ Axis Gantry module and Base Assembly dramatically saves you time. Pre-organized wiring and a pre-assembled drag chain save time and effort, requiring only final connections to the ports for a hassle-free CNC experience.
- Expanded Functionality: While remaining based on open-source Grbl V1.1, the 3020-PRO MAX V2 CNC router has been upgraded with high-powered Toshiba TB6S109 drivers featuring 32-bit chips, resulting in improved performance. The upgrades include the addition of extended function ports, such as a dedicated 3 Pin Laser Port, Air Assistance Pump Port, and MPG Port, providing users with enhanced versatility and options for various applications.
- All-inclusive Package: The Genmitsu 3020-PRO MAX V2 CNC router offers a comprehensive solution with everything you need included in one package. It features upgraded components, including an upgraded offline controller, 6pcs XYZ axis limit switches, emergency stop switches, photoelectric Z-probe, and more, providing exceptional return on investment.
Description
3020-PRO MAX V2 3020-PRO Ultra 3030-PROVer Ultra Cubiko This kit extends the Y-axis of your CNC to 460mm. When the extended aluminium spoilboard is installed, the effective working travel of Y-axis is 400mm. A MDF spoilboard is a disposable workbench that protects your CNC router machine and provides a flat and level surface for your workpiece. Pre-cut vent port access for dust collection. Don't worry about dust flying everywhere while your CNC is working. Keeps your workshop clean. Control your CNC Router or Laser Engraver without connecting a computer. Your machine could be placed wherever you want and run your projects untethered. This clamp accommodates material up to 35mm (1.38'') thick and holds it firmly in position. It can hold a variety of materials for desktop CNC router machines. Equipped with nylon brush to maximize vacuum suction and help act as a dust sweep with high dust removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving. Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Visit the Store Here at SainSmart we have been serving the maker community for years, starting in the early days with high-quality electronic parts and into today with our Genmitsu line of CNC mills for every experience level. We love making, we are just a bit different than the people we make our products for. Our passion is making the best, most affordable tools available and getting them out to the maker community at large to do their thing!
Brand: Genmitsu
Material: Aluminum
Power Source: Corded Electric
Product Dimensions: 11.8"W x 3.1"H
Voltage: 230 volts
Power Source: Corded Electric
Voltage: 230 volts
Maximum Rotational Speed: 12000 rpm
Base Type: Fixed
Battery Description: Corded Electric
Material Type: Aluminum
Item Dimensions W x H: 11.8"W x 3.1"H
Item Weight: 14.86 kg
Brand Name: Genmitsu
Model Number: 3020-PRO
Global Trade Identification Number: 23
Unit Count: 525.6 Ounce
UPC: 816550025123
Included Components: CNC Router Machine
Item Type Name: Upgraded 3 Axis Engraver for Metal, Wood, Acrylic, PCB MDF, New Structure & Offline Controller & 6pcs Limit Switches, Working Area 11.8 x 8.1 x 3.1 inch
Manufacturer: Genmitsu
Manufacturer Part Number: 351220550
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Thursday, Aug 6
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- Zip Pay in 4
- Financing through Apple Pay
- Financing through Google Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Style: 3018-PRO
I was just like you, reading reviews and contemplating if I should meander in to the world of CNC machines, a world that I know nothing about. If you're searching for these machines, you're already interested - so the only thing I can tell you is - get it. I have basic knowledge when it comes to electronics/hardware/software, if you're completely new to these things, the setup and usage may be slightly intimidating, but it IS easy enough that anyone can do it by following basic instructions. Like most mention - instruction manuals aren't the easiest to understand (for anything) but there are a ton of user videos all across the interwebs showing you how to set up/run the 3018. (seriously, if you need to learn anything, ever, about anything, ever, just YouTube or TikTok that ish) Out of box - I was a bit anxious. Any time you're opening a package that has hundreds of tiny parts it can seem like an uphill battle. If you dedicate a half hour or so of watching a set up video (all the way through), then setting it up while watching it again, it makes this set up a breeze. I had mine completed in about an hour, and after a minor issue was up and running. The V Bits that come with the machine are what I use most for cutting out designs. I also purchased some straight bits to use which, to me, are necessary if you're cutting out large pockets of material. As far as while this machine is running, people have mentioned noise quite often in reviews. I did not find the noise to be overwhelming. I have the 3018 set up in a room inside my house, and with the door shut, it doesn't disturb us at all. I use a Mac currently. I hate it, I was born and raised on a PC. So far I have found that Easel (it's a free application from inventables) is the easiest and most user friendly application to send G-Code, or your designs, to the machine. It's also incredibly user friendly for creating new designs for your 3018 if you're less than a novice and don't use any number of graphic suites (inkscape, illustrator, photoshop) along with Fusion 360 to create toolpaths for your designs. Windows users have a ton of more options to utilize your machine while connected to a computer, or you can upload your codes to the controller that comes with the machine to create your projects. I have used the 3018 quite often in the month I have had it. As always, there is trial and error involved. There is a learning curve when it comes to types materials to cut/carve at what speeds, and what types of bits to use. As you try a few projects here and there, you'll get much more comfortable about what to cut, and how to cut it. You can research and read about spindle speeds/materials/bits as much as you want, but you'll inevitably learn more from trial and error after having that basic knowledge from your prior research. So far I have mainly used MDF for my projects, though when attempting to use it on acrylic and copper, I can see the vast potential this machine has. CUSTOMER SERVICE for this product awesome. I had an minor issue during set up, and I was sent a replacement part incredibly quick. I was up and running the same week I received the machine. I have seen reviews complaining, but my experience reflects all of the glowing reviews about the help I received. This isn't a plug and play machine. You have to set it up. You have to learn it. At the price point, and with the capabilities this machine has - it is the PERFECT starter machine to get into the world of CNCs. All I can say is that you won't regret this if you try it. I'll upgrade the bed of the machine for larger projects, and eventually invest in the laser module to play with that as well. I would definitely recommend this machine and I would buy it again.
...
show more
Reviewed in the United States on February 7, 2022 by ChuckD
Style: 3018-PRO
The 3018 router is neither a production machine nor a toy. It is a solid hobbyist tool that is capable of producing excellent results. Assembly is straight forward with an excellent pictorial guide. Expect to put it together in an hour to a few hours depending on your experience. The unit is well designed and constructed. Tolerances are tight and there is no flex in the frame. The travel along the x and y axes measured precisely to spec out of the box. The kit comes with everything you need to get started including some bits and a disk with software. A word on software: Some reviews criticize the machine based on "software". The fact is that the firmware (the code that lives inside the controller board) is a recent version of GRBL, an open source program that is behind the vast majority of desktop routers. Every CAM program you are likely to use supports GRBL, so you will have access to a plethora of design tools to create your projects. Keep in mind that CNC is a 3 step process: 1) design the piece in CAD and export to DXF 2D format; 2) use CAM software to prepare G code by providing information on the bit, depth and order of cuts, and travel and rotation speed of the bit; 3) send the G code to the router with G code sender software. Don't be confused by the fact that some applications can combine 2 or even 3 of these steps. Like with 3D printing, it is very gratifying to start with an idea and develop it into a physical object. If you have the maker mentality this machine will provide great enjoyment and utility. UPDATE: My controller board stopped working--a very common occurrence for desktop routers due to the heat the motor drivers generate. I sent an email to Sainsmart describing the problem and within a few days they had a new board in the mail to me. After I received the board, their representative even followed up with me to make sure everything was working. This is the kind of customer service you love to have, and so rarely get. Even if you pay a few dollars more to buy from Sainsmart, it's well worth it. They will stand by their products.
...
show more
Reviewed in the United States on July 24, 2019 by Stephen
Style: 3018-PRO
I have spent over 10 years in the CNC router world (building, servicing, installing, training, and running) so this little Sainsmart router kit was not my first rodeo. Here are my impressions: Packaging: Very nice, everything custom fit in foam and a nice box. For the price I was expecting everything thrown in a bag, so this was a good touch. Build quality: I was honestly pleasantly surprised by the quality of the components in this kit. The aluminum extrusions were cut cleanly and tapped properly, though be prepared to do a bit of cleaning; my extrusions were covered in cutting oil and metal shavings and I had to blow them out after wiping them down. I expected the plastic components to be cheap 3d printed parts but they are actually some sort of fairly tough cast resin. The uprights and the sides of the machine are made out of phenolic resin sheets (the instructions call it bakelite) and were cut well. The only thing that seemed to be poor quality were the fasteners and the included hex keys (more on that later). Assembly: Overall, the instruction booklet makes the assembly pretty clear and with a kit this simple there just isn't a whole lot that can go wrong. However, there are a few issues. The first is the aforementioned hex keys: throw them out and grab some decent ones, at least for the small screws. Mine were slightly undersized and I could not tighten down the set screws for the motor couplings at all. Luckily, I have piles of hex keys all over the house so I found a set that worked a little better. The next part is more important, so I'm giving it a couple carriage returns so it stands out: BUILD IT ON SOMETHING FLAT! There is enough play in the machine that you could easily get everything bound up or just have poor accuracy due to the machine being out of square. I used a granite surface block, but not everyone has one of those lying around so at least make sure you're using a flat table. Make sure everything is as flat and square as you can make it. Also, leave the screws for the guide rods slightly loose as you move the machine around, then tighten them incrementally so they don't bind. I did run into a couple assembly issues with my spindle, the first being that it really wasn't a good fit in the actual block. The spindle was too big for the hole and some prying ensued before it would fit. Once I had it mounted, I noticed that the motor didn't have a marking for which side should have the red wire. With a DC motor like this, it isn't a huge issue; if it's spinning the correct way, it's wired right. If it's spinning the other way, you have it backwards. "Correct" in this case means the bit spins clockwise when looking down from the top. Easy way to visualize this is to make a "thumbs up" with your left hand. See the way your fingers are curved? That's the way the bit should spin. Electronics & Software: Everything was plug and play on the electronics part. I liked that cable ties were included so I could keep the wires tidy. I would have appreciated having different size motor cables for each stepper but at least none of them were too short. The circuit board seems well built and was pre-flashed with the correct firmware. All you have to do is install the driver and then open up the software (the Candle GRBL controller software) and set it to the same serial port you see in your device manager. Once that's set up, it's easy to control and send files to. The visualization is a nice touch. All in all, I'd recommend this for anybody looking to get started in CNC routing and doesn't mind the small build volume and anemic spindle. You have to go low and slow with it but it will cut and the machine has good bones if you wanted to start upgrading it down the line. Well worth the ~$200.
...
show more
Reviewed in the United States on December 7, 2019 by John
Style: 3020-PRO MAX
I’ve never used a CNC Machine before purchasing the Genmitsu 3020-PRO MAX, and to be honest I didn’t know if I could figure it out. I have to say that I sure had a lot to learn. Granted I did watch a whole lot of YouTube and seen the different types of machines. The one thing that hooked me was the wood cravings that could be created that as a wood craftsman I could never accomplish with the limited experience I have. I chose this machine over others was first the price, ease of assembly (it comes mostly assembled already) and simplicity of the operation. I purchased my unit in July of 2022 but since I was not ready to start I didn’t open the box till June. Getting the 3020 was pretty easy. Learning the difference softwares and programs was the default part. The box it came in had all the parts and manuals to put it together but was missing a USB stick with the software! At first I was a bit taken back by this and sent an email to the customer service department. This is when I first realized I had made the right choice. A service member (Hong or Mr. Hong) was right on spot with sending me a link to download software. I used a Laptop with Windows 10 and was able to setup the comport and install Candle. A software that uses files called gcode (*.nc file) to tell the machine what to do. Also one of the files was a test file that craved a small 2.5D image. I know this now but didn’t know then that a machine with three axles will only crave 2.5D as the other 0.5 is the flat surface on the bottom. From this one file I was able to figure out the files needed to take a object (2.5D) and turn it into a work of art. To my surprise it actually takes three steps to complete first. 1st was finding the object files. Too my delight in found 1000’s of free files in a *.stl format online. As I’m not going to use these files or creations to sell I downloaded and modified using a software already available in Windows called 3D Build. I then downloaded a trial version of MeshCam. As my CNC machine is located in a spare room, I used another Laptop to modify the files, open these files with MeshCam to create the tool paths and convert the files from an STL file into a NC file that the Genmitsu 3020-PRO MAX uses. I only was able to convert 15 files using MeshCam before the trial version ran out. I have tried other softwares but after using MeshCam I will pay for the license ($250.00 one time payment) as other programs where not as easy to learn and the results as positive. I would have purchased the software already but ran into issues with the stepper motors. I started getting what I first thought was banding with the X and Y axis that increased very quickly, projects halfway completed were being ruined. I emailed Hong and told him my troubles and he sent 2 new stepper motors to me free of charge. I installed the new motors and it’s back to creating beautiful works of art. While the machine was down I was able to give the machine a good cleaning. My only drawback with the machine is that the manufacturer does not at this time offer a explanation kit for this model. I’m hoping one will come out in the near future. Overall I give this one an 4 1/2 Stars. It’s built strong, service is excellent and it’s a very good investment for anyone looking to get into using a CNC Machine.
...
show more
Reviewed in the United States on March 24, 2023 by Karl Corpus
Style: 3018-PRO
The Genmitsu CNC 3018-PRO is one of the more polarizing products I've purchased in recent memory. In case you suffer from TLDR; syndrome, I will tell you this: the 3018-PRO is an incredible value... especially if you get it on sale. It's also a bit of DIY PITA. So, now you know the summary... time for the details. The Genmitsu CNC 3018-PRO arrives in a very compact box. That's made possible since the unit is COMPLETELY disassembled. This shouldn't be a huge surprise, considering the price point, but I'm telling you just in case. An important thing to know is that the mill's pieces appear to have come straight off of whatever machines were used to fabricate them. The aluminum extrusions are covered in metal shavings. All of the parts, including the bakelite pieces, have some machine oil on them. For best results, blow everything off with air (or brush it), and wipe down everything. If you are the DIY type (and I am), then a fully disassembled machine isn't really an issue... unless the assembly instructions aren't any good. On the plus side, the manual is pretty extensive (24 pages) considering the other types of vendors and devices in this market space. The english is clear, the diagrams are well drawn and easy to see, and the instructions of what to do with the software are clear. So what's wrong? Well, the diagrams don't explain what you're doing on any particular step. That's not necessarily a big deal, but I did miss using a spring as a brass fitting. It only took a few minutes to get it right, but it was still inconvenient. From unboxing to flipping the machine on took me about 40 minutes. TIP #1: It's not super obvious how some of the locking nuts are supposed to work, but they drop into the guide channel and spin onto locking position when almost fully screwed in. TIP #2: There are no instructions on how your working material is supposed to be secured to the table in the documentation provided. I did figure it out what to do with the hardware provided, but you should just look at the product page photos, and you'll see how the bolt + plate + screw arrangement works. Once everything was assembled and ready to go, I went to SainSmart's page to download the driver, firmware, and secondary software. No dice... I couldn't find it, so I had to copy it from the included mini-CD (but seriously... what about all of the people that don't have an optical drive?) on to a flash drive. Everything installed in a few minutes, and the mill was controlled properly from the GRBL software. The mill works, but it good to have realistic expectations. How well it works is heavily influenced by the spindle speed, the motor positioning rate, plunge depth, and the cutting tool quality. I used the mill with acrylic and wood, which are pretty much the softest materials you can use. Even with those I had to use really low step values to make sure that the side loads didn't cause too much bit deflection. I'd imagine better bits would help here. I think you'd want a more substantial machine if you want to mill some of the softer metals (aluminum, copper, and the like). As an introduction to CNCs, the 3018-PRO is a nice starting point. The polarizing thing for me is the price... I'd been looking at this item for a while, but never pulled the trigger at its normal price. A week or two ago the price dropped in a lightning deal by $50. If you can get that deal, I think it's a no-brainer. Value is a very subjective thing, though, so you may like it at the current price, too (YMMV). Conditionally recommended.
...
show more
Reviewed in the United States on August 13, 2019 by Dad, the engineer
Style: 3018-PRO
This will be a lengthy review .. 1. Assembly was easy. There is a very nice instructional booklet and plenty of videos on YouTube on how to do it. Took me about 40min to 1 hr. 2. The item came well packaged and gives a bit of a WOW moment when you open it. I mean you pay under $200 and everything is nicely placed inside and no parts missing :) 3. The frame is sturdy, everything pretty much self levels and squares as you put it together. Assemble slightly loose and tighten up all bolts fully at the end. Honestly, by the time I was done with assembly and played with the software, I was surprised that there were any negative reviews lol 4. The USB stick was a nice touch but you still need a service/program to convert data to gcode. There is a learning curve with getting this to work but YouTube is your best friend again. I am very tech-savvy and had no issues at all. Others might have a different experience but give yourself time and you will get it; it's easy, I promise :) 5. The problem/s- The connection created by the Coupling&Set screws!!! This is a nightmare! The issue is that they can't hold tight enough to handle the tension created by the spindle w/bits against the surface your are milling/carving. They simply come loose and the job goes to trash. 6. Also, once assembled, there is no good access to keep tightening both ends (motor and rod) on all 3 axes. For X and Y, you need to detach the motors and reattach again. For the Z axes, you need to work on the one end at an angle. When one of those coupling screws gives in, the machine can't follow the code and move in the failed direction so your project is ruined. One would say hit the Stop button, adjust/fix/tighten and continue.. hm, it doesn't work like that. By the time you hit Stop, you either get a scratch or a hole dug into the material by the bit, depending on which axes fails. 7. I only used mdf and plywood, both 1/4 inch thick. Out of maybe 20 jobs, I had only 3 successfully completed. Can't imagine if I had to do work on a walnut piece. 8. Each successful attempt came after I fully unscrewed, disassembled, reassembled and freshly tightened the coupling screws. And this to me, is totally unacceptable. At least give me 3 good cuts before I need to go through the nonsense lol 9. The machine is noisy when in operation but I didn't expect it to be quiet, its a power tool after all. it's pretty much on par with my Vacmaster. So, is this machine usable? - yes, if you are willing to tighten all coupling&ser screws and bolts between each use. This deserves 1 star only because if you are determined to make it work, you POSSIBLY can. When I was watching tips/tricks/troubleshooting on YouTube, I came across a guy who suggested that one should put a drop of superglue when tightening the screws. Perhaps that would work to a degree, it might've actually given me the 3 good cuts i want lol But let's face it, how long would the superglue metal to metal bond hold when the machine is in constant vibration during operation?!? Yep, 3 good cuts then back to point 8 above :) Save your money, time, frustration and materials, and buy something better. I can't afford the $2k price tag so decided to give Foxalien Masuter a shot next. I'm truly hoping my experience is better with it because I have so many ideas and want to open a hobby shop on etsy. I am forever grateful for Amazon and their return policy. I've disassembled the cnc and sending it back.
...
show more
Reviewed in the United States on September 16, 2022 by Amazon Addict
Style: 3018-PRO
I have been looking for a desktop CNC router to make small parts for rc model aircraft and quadcopters. The materials which I use most often are 1/16" to 1/4" thick balsa, basswood, light-ply, aircraft grade plywood, spruce, cherry, maple, and occasionally, 3mm carbon fiber plate. I was skeptical that this machine could handle these materials, but after doing some reading on the internet, I decided to give it a try. What I like about it is this: (1) is is very well built, just use blue thread locker on the screws and grub screws holding the parts together because all machines like this are subject to vibration, not matter how well built or expensive they are. (2) Use the depth gauge on a vernier caliper to square the aluminum xy-table to the frame since this thing will, like all machines, be only as good as you put it together. Do this by measuring the distance between the xy-table and the frame on the diagonals from opposite corners of the xy-table. (3) The motor is relatively quite. Quieter than my Dremel 4000. (4) It includes an ER11 collet, and an off-line controller which is easy to use. (5) It has a variety of upgradable parts and spare parts are available. (6) It works particularly well with Easel and FreeCAD, and of course Candle. What I don't care for are the bakelite components, but they are more than strong enough for the machine and the makers had to economize somewhere. Some people complain that there is some flex in the rods supporting the motor carriage. I have not found this to be a noticable problem. In the bags of parts you will find an blue extra shaft coupling adapter. I finally realized that this is used to hold 1/8" bits to the motor's spindle if you don't use the ER11 collet. The ER11 collet is much easier to use.
...
show more
Reviewed in the United States on March 14, 2024 by Carl
Style: 3018-PRO
Headaches at first, was ready to send it back. but once I was done fine tuning the feed rate, depth and plunge rate this machine really impressed me. If you're running this with cut settings like it was a big professional model you're going to run into nothing but problems. Also make sure you are oiling the rails otherwise they will bind up and your stepper motor will skip.
...
show more
Reviewed in the United States on July 17, 2026 by Vinlandic Heathen