FUTABA 6PV-R404SBSE-F24J1DX 00008725-3 High Middle Class Propo Receiver Set for Cars

Features

• The middle class wheeler propo has been introduced to a large evolution
• [Receiver Set for Electric Cars] T6PV, R404SBS-E
• Power Supply: 4 x AA batteries (not included)

Description

The middle class wheeler propo has been introduced to a large evolution. [Receiver Set for Electric Cars] T6PV R404SBS-E [Full color display + function icons] Futaba Max Speed System F-4G+UR Mode Full color display Easy to read color function icon Can be used up to 6 channels Equipped with 6 systems of F-4G, T-FHSS, S-FHSS, MINI-Z EVO, MINI-Z EVO2, MINI-Z FHSS. The "Model Type" of the Normal Big Drift "Winch Mixing" for crawlers or "Drag Race" boom in the U.S.A It is packed with features such as "feeling" that can be adjusted from mild to aggressive. [Features/Specifications] [Setup Menu] Receiver settings (F-4G/T-FHSS/S-FHSS and MINI-Z compatible) MINI-Z is also compatible with MINI-Z EVO, MINI-Z EVO2, MINI-Z FHSS (Note 1). Telemetry function can only be used in F-4G and T-FHSS mode. S-FHSS,MINI-Z mode cannot be used. Note: 1 MINI-Z FHSS requires a MINI-Z FS-RM005 module (made by Kyosho Co., Ltd). Servo View: You can see servo operation on all channels. You can check the operation when you set the rudder angle adjustment, mixing function, etc. Throttle Mode: Neutral brake can be set to brake in the neutral position of the throttle trigger Reverse: A function that determines the direction of the servo and other equipment operates for transmitter steering, throttle, channel 3/4 and other reserve channels. Subtrim: Used when assembling the model, to fine-tune the center position of the standard servo horn in the linkage where the components are connected by a rod. End Point: This function is used for adjusting steering left and right rudder angle, adjusting the high side/brake side of throttle operation, and adjusting the upside/down side of channel 3/4 and other spare channels. Fail-safe function: The servo operating position is set if the receiver cannot receive the signal of the transmitter or the receiver battery voltage decreases. Fail-safe, hold, and OFF modes automatically unlock when you can receive a signal from the transmitter again. Acceleration: You can adjust the rising properties of the throttle forward / brake side neutral. Trim/Dial Setting: Digital Trim (DT1 ~ DT6) and Dial (DL1) operational functions can be set Switch Setting: Choose the function to operate push switch (SW1 to SW3) and set the operation method. Idle up: Used to increase engine startability by keeping idling up when engine car (boat) started. This function is also effective when you want to prevent brake phenomenon when you power off while driving due to gear ratio settings and the influence of motorized vehicles. However, if you are using the MC971CR, MC970CR, MC960CR, MC950CR, MC851C, MC602C, MC402CR, and similar to the neutral brake function, the ESC recognizes the neutral position and then switch the idle up function to ON after it is workable. D/R, ATL Channel Setting: Function to assign steering or throttle to any channel. Useful when you want to use steering or throttle on another channel, or just want other channels to perform the same action as a steering or throttle. Model Menu Model Select, Model Copy Model Name Model delete (inside SD card) Date Set Model Type: Allows you to take advantage of the original setup suitable for 1/5 models and drifts. [Mixing Menu] Steering Mixing Brake Mixing Gyro Mixing 4WS Mixing Dual ESC CPS Mixing (1, 2, 3): When using CPS-1 (optional), you can set the LED light pattern etc. Tank Mixing: Mixing for tanks and other shoe bands. Program Mixing (1, 2, 3, 4, 5): You can also set the master of mixing to telemetry. Winch Mixing: Crawler effective mixing [Racing Menu] Curve (EXP): You can set steering, throttle and brake individually. Speed: steering and throttle can be set separately. Traction Control: Intermittent throttle movement allows for smooth maneuverability and ideal lines In addition, the drift car can be used to intermittently operate the motor in the high point direction, so you can reproduce the simulated rev limitter. A.B.S:If you apply the brakes during the corner ring on a full-time 4WD car, it will be understeered, but this feature allows you to clear corners smoothly. START: Simply operate the throttle trigger slowly so you don't lose your grip, and it will automatically switch from the set trigger position to the preset point for a smooth start Engine Cut: This function allows the throttle servo to operate in preset position (engine cut position) to stop the engine with the switch. Feeling: This is a function to milden response when the servo is too sensitive and difficult to operate. The mild side will slow the response and the aggressive side will reduce the response. Feeling adjustment OFF is the fastest response state. Drag Racing (Transbrakes): When the throttle (trigger) is fully open, the car body is stopped and the transformer brake is released, resulting in sharp acceleration. [Accessory Menu] TIMER: Choose one of 4 timers: Up Timer, Fuel Down Timer, Lap Timer, and Lap Navigate Timer. Lap List: Calls when you check the lap memory data (each rounding time) remembered by the operation of the lap timer. S.BUS Servo: This is a special feature that allows you to change the parameters of the Futaba S.BUS / S.BUS2 servo. Change UR Servo Settings MC (ESC) link: ESC can be set up. Gyro Link: You can set the gyro Exponent table: Exponent table for DD cars. Gear Ratio Table: Calculates the final deceleration ratio from the secondary deceleration ratio of the input pinion gear, spargear, gearbox and display it in the table. END/DIR button setting: You can customize the END/DIR button as the call button on your favorite menu. Home Screen Display Settings: You can customize your home screen display. Custom Menu Editing: You can create your own frequently used functions. Warning Display: Low Battery Alarm, Forget Power Off, MIX Warning System Menu Display Settings: Set backlight brightness, dim time, etc. System information: You can choose the user name setting or use the display language and telemetry information using the jog key. It also displays the soft version. Buzzer: You can adjust the sound of switch/trim/jogkey and the alarm alarm tone Battery Setting: Set the battery type to ensure the correct battery alarm voltage. Total Timer: You can display the accumulation time when the power is turned on on the home screen. LED Settings: The brightness and lighting method of the pilot LED light can be set (steady on, off, and backlight linked). Adjuster: Allows you to adjust the neutral position of the steering wheel and throttle trigger and adjust the operating angle. Receiver Update: Updates through Propo. Accessories: 1 x Wheel Position Change Adapter APA-M 1 x Mounting Screw Bag 1 x Wheel Adapter 32° 1 x Large Brake Lever 1 x Angle Spacer 5° 1 x Large Diameter Steering Wheel UR / SR label 1 x User Manual Hex Wrench Power Supply: 4 x AA batteries (not included) Batteries are required to drive this product, but batteries are not included. This product does not include fuel, battery, charger, paint, glue, oil, grease, tools, etc.

Product Dimensions: 4.33 x 7.48 x 8.27 inches

Item Weight: 2.42 pounds

Item model number: 00008725-3

Manufacturer recommended age: 15 years and up

Release date: February 2, 2025

Manufacturer: 双葉電子工業(Futaba Denshi)