Search  for anything...
FAHREN

Fahren 9012/HIR2 LED Headlight Bulbs, 120W 20000 Lumens Bright LED Headlights, 6500K Cool White LED Headlight Conversion Kit IP68 Waterproof, Quick Installation, Pack of 2

    • Based on 10,437 reviews
Condition: New
Checking for product changes

Notify me when this product is back in stock

$41.88 Why this price?
Save $28.10 was $69.98

Buy Now, Pay Later

As low as $10 / mo
  • – 4-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: Unavailable
Fulfilled by Element 26
Available payment plans shown during checkout

Recently Viewed

Model: 9012/HIR2


Features

  • 600% BRIGHTER THAN HALOGENS: Superior LED bulbs with 120W, 20,000LM per pair. The 9012/HIR2 led headlight bulbs provideto 600% more light with a 6500K cool white clearer color. This6 times brighter than your original halogen bulb.
  • PERFECT BEAM PATTERN: The ultra-thin design makes the chipsour 9012 led bulb much closer for a Super-Focused beam, delivering wider angle and farther range lightthe road.glareoncoming traffic, anddark spots ensure a safer drive.
  • 10-MIN QUICK INSTALLATION: Almostidentical designthe original halogen bulbs which makes direct replacementfactory halogen bulbseasy plug and play.
  • OVER 50,000-HOURS LIFESPAN: Take aviation aluminumthe main body has a good heat dissipation, the carved heat sink designed and 1,2000RPM turbo cool fan provide super cooling ability. This 9012/HIR2 LED headlight can ensure a life spanto more than 50,000 hours, reducing the needreplace the bulb and reducing the numbertimes you willin the dark with a burnt out headlight.

Brand: FAHREN


Light Source Type: Light Emitting Diode (LED)


Included Components: LED Headlight Bulbs


Wattage: 60 watts


Fit Type: Vehicle Specific


Manufacturer: ‎Fahren


Brand: ‎FAHREN


Model: ‎9012/HIR2


Item Weight: ‎12 ounces


Package Dimensions: ‎7.09 x 4.72 x 1.93 inches


Item model number: ‎9012/HIR2


Manufacturer Part Number: ‎TX12ZW


Position: ‎Front


Bulb Type: ‎Light Emitting Diode (LED)


Mirror Lighting Type: ‎automotive-exterior-headlight-bulbs


Voltage: ‎12 Volts


Wattage: ‎60 watts


Date First Available: September 3, 2021


Frequently asked questions

This product is currently out of stock. Please check back later for shipping info.

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Minor switcheroo is required on 4Runner
Model: H11/H8/H9
This Bulb is very bright even during the day, to the point where people will ask why do you have a 22,000 Lumen light bulb on at 2pm. Yes, having a 22,000 Lumen bulb is crazy during the day but its the best during the night when you need to see what is ahead of you. Installing this bulb on a 2020 4Runner TRD OFF ROAD is quick and easy, but the blue rubber washer is too large. So, to those who wish to install this Bulb onto your 4Runner, the best is to remove the blue rubber washer and use the original Halogen rubber washer if that is what comes factory with your vehicle. It's that or get a whole LED headlight Housing unit. ... show more
Reviewed in the United States on August 12, 2023 by Amazon Customer
    • Bright! Compatible with all 3 (low/high/fog) lights in Nissan Altima 2013.
Model: H11/H8/H9
Great addition to Altima! The original headlights were trash, foggy and dark yellow-ish. They have been recalled by Nissan, but we missed this window to get the headlight assembly replaced, so we had to do that on our own. The new assembly together with these bulbs have shocked the installers, they were incredibly bright even in the day light. All I had to do is to take a very long screwdriver and adjust the height of the low beam spots because they were shooting to close to the car. It's is fantastic how everything works now, it's a big pleasure to drive this car at night after this improvement. It's not my first purchase of this brand, got another set for Odyssey and I'm very happy with it. I hope the set will last forever, because replacing these bulbs in Nissan Altima is a terrible pain, one needs to disassemble a front part of a car to get access to the bulbs, at least to remove a wheel and bend a plastic cover above it, stupid design, could expect more than that from Nissan! ... show more
Reviewed in the United States on July 29, 2023 by DSh
    • H11 FACTORY DEFECT
Model: H11+9005
Review Image by ALAN ALAN
Review Image by ALAN ALAN
Review Image by ALAN ALAN
Review Image by ALAN ALAN
Review Image by ALAN ALAN
Review Image by ALAN ALAN
Review Image by ALAN ALAN
Review Image by ALAN ALAN
****UPDATE 2**** I have installed them and sure enough the set screw caused my suspected issues on the H11, and a unexpected set screw issues on both 9005 & H11. The unexpected problem, was the set screw will not hold the collar as intended. As you should know, the proper installation require the LEDs to point to 9 & 3 o'clock so you're lights don't blind people and work as intended. The set screw and the collar is how you adjust this. When I was installing both sets, the force needed to push down the seals, was so great that once you turned the bulb to lock it in, the set screw slips and then your bulb is no longer where it should be. The fix I used was to use a cotton swab with a very thin layer of lube on the seals and mating surfaces, to lower the pressure needed to turn and lock bulb into socket. Also, I realigned the setscrew where it should be and tightened it up. Even with the fixes, I had to do it twice for each bulb. Also the reason I did it twice was part of my original complaint, the H11 set screw grabbed the seal and twisted it. The second try with the lube and it was ok. The low beams work incredibly well! Since I aimed them properly, they are not blinding yet I can see everything. The brights are unbelievably bright, but hard to aim. ________________________________________________________________ The 9005 pair appear to be ok, but I have not installed them yet. The H11 pair have a definite factory/engineer defect. I have not installed these yet, so an update will be coming. As most of you know, modern headlights need sealed to prevent moisture and dirt from clouding up the lens. So this factory defect may not seem to be a big deal to some, but it could allow moisture in around the seal/O-ring. Picture 1 shows the blue O-ring isn't straight/flat. It has a bump. At first I thought it was just out of the groove, but on further inspection the allen set screw used to align your LEDs at 9-3 o'clock is what's holding it up. I then thought maybe it's not screwed down all the way, but I used the supplied allen wrench to check tightness. They were already tight Picture 2 & 3 I pulled the O-ring up to fully expose the set screw. Picture 4 & 5 I took notice of the position of the seal, so I would place it back properly and only fixed one bulb at a time to be sure. I used fingernail clippers to cut a small notch to make room for the set screw. This was my choice to fix it, but you could always try to find a shorter set screw, or grind this one down if you're good at working on tiny parts. Of course you could always return them Picture 6 & 7 is where I reinstalled the O-ring. Notice I used a pen to mark the O-ring with a small line so it was easier to line up the notch I cut to the set screw. Be sure to get the O-ring set straight in the groove. Also I am worried the O-ring could slip when I install on my SUV, so I gently cleaned the O-ring and the groove with alcohol. I used a cotton swab on the groove, carefully so as not to get any alcohol on the bulb or circuits. I also plan to put just a tiny bit of dielectric grease on the contact surfaces when I install them, to help keep the seal I place while turning them . Picture 8 is of the positive and negative marks ( + - ) on the plug. For those that don't know, LED is a Diode, a Diode that is Light Emitting, hence the name LED. A Diode is used to only allow electricity to flow in one direction. If you see a plain one on a circuit board, it has an arrow on it showing the direction. Some LEDs you don't have to worry about which side is positive or negative, they may have circuitry that makes it work either way. Some LEDs must be wired/plugged in to the correct polarity. I'm not sure how these are, but the plug is marked to help you. If they don't work, just flip the plug around. If you have a multimeter, you can use it on the car side of the plug to figure out for sure which side is positive. I'm confident I chose good LEDs and my fix will work. I probably have ruined my warranty doing this, but it is what it is. Sorry for the long review. I am off work for now and it's too cold to go outside so I am bored. I'm hoping Fahren sees this and replies and/or fixes the issue. It seems to be difficult to navigate their website to look up product or contact information. When the weather gets warmer I will install these and update my review ... show more
Reviewed in the United States on February 7, 2022 by ALAN ALAN
    • Brightness
Model: 9003/H4
When I bought these bulbs I was looking for something that would be better and brighter then what I was already running On my car . I read a few reviews on these lights which pushed me to purchase them ,and man they didn’t disappoint at all . These things are powerful and light up the entire road on regular low beam , there’s very few products that actually do the what day they do .. ... show more
Reviewed in the United States on August 27, 2023 by Cleazo83
    • Super bright
Model: 9005/HB3
Best high beams I've tried in my 17' explorer sport. I have factory LEDs for low beam and dots but halogen for highs from factory. All LEDs are nice and white but the highs were yellowish and I couldn't stand it. Tried several others that got 5he similar whit light to match but weren't bright at all. These are incredible however. Highly recommend these you won't be sorry. These are only my high beams and aren't used for long periods of time but last few months they have been awesome and still going strong. Seem very high quality so I think they will last a long time. ... show more
Reviewed in the United States on August 9, 2023 by Ashley and Dan
    • Very bright as advertised
Model: 9005/HB3
Review Image by justin513 justin513
Review Image by justin513 justin513
Review Image by justin513 justin513
Installed the headlights to my 2019 chrysler 300 8/20/2023 So far so good , they have a built-in turbo fan ,which keeps them cool while in use . Based off the instruction I placed the headlights with the lighting chips facing 9 o clock , 3 o clock and from the picture above I drove down a dark road to really test them out , I was very impressed . ... show more
Reviewed in the United States on August 21, 2023 by justin513 justin513
    • Very bright and easy to install
Model: H11/H8/H9
These lights are bright and project very well on the road. Very pleased so far. I was not sure if to put the rubber cap back over the headlight enclosure since these lights look like they need air cooling. I did cover them in the end, but I will read up on that.
Reviewed in the United States on August 27, 2023 by HobbesTheTige
    • Feel like will get pulled over hahaha
Model: H7
I have some something else that are not so strong in the low beam, I only dare to put these fahren bulb in the high beam because I feel like the brightness on these will get me in trouble, they are almost too bright for everyday driving. If you are looking for something that are crazy bright, order them now, it comes with great packaging, well made, bright and clear at a very affordable price, buy them. ... show more
Reviewed in the United States on August 15, 2023 by Matt

Can't find a product?

Find it on Amazon first, then paste the link below.