That product is currently unavailable. Please try a different product or see this article for help.
Dremel EZ406 1-1/2" EZ Lock Rotary Tool Cut-Off Wheel & Mandrel Metal Cutting Starter Kit, Silver, (EZ406-02)
Dremel EZ406 1-1/2" EZ Lock Rotary Tool Cut-Off Wheel & Mandrel Metal Cutting Starter Kit, Silver, (EZ406-02)
Dremel EZ406 1-1/2" EZ Lock Rotary Tool Cut-Off Wheel & Mandrel Metal Cutting Starter Kit, Silver, (EZ406-02)
Dremel EZ406 1-1/2" EZ Lock Rotary Tool Cut-Off Wheel & Mandrel Metal Cutting Starter Kit, Silver, (EZ406-02)
Dremel EZ406 1-1/2" EZ Lock Rotary Tool Cut-Off Wheel & Mandrel Metal Cutting Starter Kit, Silver, (EZ406-02)
Dremel EZ406 1-1/2" EZ Lock Rotary Tool Cut-Off Wheel & Mandrel Metal Cutting Starter Kit, Silver, (EZ406-02)

Dremel EZ406 1-1/2" EZ Lock Rotary Tool Cut-Off Wheel & Mandrel Metal Cutting Starter Kit, Silver, (EZ406-02)

Dremel EZ406 1-1/2" EZ Lock Rotary Tool Cut-Off Wheel & Mandrel Metal Cutting Starter Kit, Silver, (EZ406-02)
Dremel EZ406 1-1/2" EZ Lock Rotary Tool Cut-Off Wheel & Mandrel Metal Cutting Starter Kit, Silver, (EZ406-02)
Dremel EZ406 1-1/2" EZ Lock Rotary Tool Cut-Off Wheel & Mandrel Metal Cutting Starter Kit, Silver, (EZ406-02)
Dremel EZ406 1-1/2" EZ Lock Rotary Tool Cut-Off Wheel & Mandrel Metal Cutting Starter Kit, Silver, (EZ406-02)
Dremel EZ406 1-1/2" EZ Lock Rotary Tool Cut-Off Wheel & Mandrel Metal Cutting Starter Kit, Silver, (EZ406-02)
Dremel EZ406 1-1/2" EZ Lock Rotary Tool Cut-Off Wheel & Mandrel Metal Cutting Starter Kit, Silver, (EZ406-02)
$28.29
$16.47 Why this price?
Checking for changes Product info up-to-date Product info updated We've detected that this product is out of stock. Enter your email below and we will notify you when it is available.
Buy Now, Pay Later
4 equal payments of $
- Zero interest
- No credit check
- Quick & easy checkout

Free shipping on this product


Availability: In Stock
Fulfilled by Amazon

Features

  • One-piece mandrel design eliminates the need for screw and screwdriver
  • Effortless locking and loading - no tiny mandrel screw to lose
  • Includes 1 mandrel and 5 cutting wheels
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.

Description

Dremel EZ406-02 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit If you regularly use cut-off wheels for your crafting and repair jobs, the Dremel EZ406 EZ Lock Starter Kit is a must-have addition to your home shop or crafting room. By providing faster and easier mandrel-mounted accessory changes without a screwdriver, this kit helps save you time and effort so you can focus on your projects. One-Piece Design for Quick Wheel Changes The EZ406 EZ Lock Starter Kit contains the EZ402 mandrel and five EZ456 cutt-off wheels. The innovative, one-piece design of the EZ402 mandrel makes it easy to EZ Lock compatible accessories--even when you're wearing gloves! With the EZ402, locking and loading is an effortless process that does not require holding the cut-off wheels in place with a screw. This saves you the worry of losing those tiny mandrel screws, and it saves you the time spent using a wrench to tighten them. Long-Lasting, Labeled Cut-Off Wheels Designed for reliable performance year after year, the EZ406 includes five EZ456 cut-off wheels that last two times longer than fiberglass-reinforced cut-off wheels. They also lock in place quickly and are labeled for easy identification to ensure you have the right wheel for the job. Versatile Design for Flexibility This set gives you the flexibility and solid performance you need to complete a range of hobby, repair, and renovation tasks. Use the EZ406 to cut through metal conduit and PVC piping, re-slot screw heads, remove rusty nail heads, or tackle light demolition jobs. With the EZ406 you can also cut aluminum and power through nuts and bolts. About Dremel: A History of Brilliance and Innovation Founded in 1932 in Racine, Wisconsin, Dremel is the industry leader in rotary tools. The company owes its success to the inventive genius of its founder and namesake, Albert J. Dremel. In his lifetime, Mr. Dremel owned 55 patents on a wide range of products from electric erasers to a gas-powered rotary lawn mower. His most famous and important invention was a high-speed rotary tool, dubbed the Dremel Moto-Tool. Compact, lightweight, and perfect for a wide range of jobs, the rotary tool was an immediate hit with hobbyists and eventually became accepted as one of the greatest inventions of the 20th century. Today, the Dremel name remains synonymous with utility, durability, and innovation. What's in the Box EZ402 mandrel and five EZ456 cutting wheels Dremel EZ Lock is the fastest and easiest way to change mandrel-mounted accessories! There is no more screw to lose and no more wrench needed to tighten the screw. The new EZ Lock Cut-Off Wheels last two times longer than current cut-off wheels. The new system even makes to easy to change wheels while you're wearing work gloves. Dremel EZ Lock Cut-off Wheels are labeled for easy identification. The patented one-piece mandrel design means that no screw is needed to hold the cut-off wheels in place. EZ Lock Cut-off Wheels can be used to cut metal conduit, PVC piping, reslotting screw heads, removing rusty nail heads.


Part Number EZ406-02


Item Weight 0.8 ounces


Product Dimensions 1.5 x 0.1 x 2 inches


Item model number EZ406-02


Size Pack of 1


Color Silver


Material Metal


Item Package Quantity 1


Measurement System Metric


Included Components Unit^Instruction Guide


Batteries Included? No


Batteries Required? No


Warranty Description As Labeled


ASIN B000FBLRVA


Customer Reviews 4.6 out of 5 stars 873 ratings 4.6 out of 5 stars


Best Sellers Rank #2,491 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #1 in Power Rotary Tool Cutting Wheels


Shipping Weight 1.12 ounces (View shipping rates and policies)


Date First Available October 2, 2003


Shipping

This product includes free shipping to all US addresses.


Delivery

Unless otherwise stated above, most products arrive within 2-3 business days. Larger items may take 6-9 business days. Tracking information will be automatically provided as soon as your order ships.


View our full shipping policy here.

Returns

This product can be returned within 30 days of delivery for a full refund. Please visit our returns center to begin a return.

View our full returns policy here.

Features

  • One-piece mandrel design eliminates the need for screw and screwdriver
  • Effortless locking and loading - no tiny mandrel screw to lose
  • Includes 1 mandrel and 5 cutting wheels
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.

Description

Dremel EZ406-02 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit If you regularly use cut-off wheels for your crafting and repair jobs, the Dremel EZ406 EZ Lock Starter Kit is a must-have addition to your home shop or crafting room. By providing faster and easier mandrel-mounted accessory changes without a screwdriver, this kit helps save you time and effort so you can focus on your projects. One-Piece Design for Quick Wheel Changes The EZ406 EZ Lock Starter Kit contains the EZ402 mandrel and five EZ456 cutt-off wheels. The innovative, one-piece design of the EZ402 mandrel makes it easy to EZ Lock compatible accessories--even when you're wearing gloves! With the EZ402, locking and loading is an effortless process that does not require holding the cut-off wheels in place with a screw. This saves you the worry of losing those tiny mandrel screws, and it saves you the time spent using a wrench to tighten them. Long-Lasting, Labeled Cut-Off Wheels Designed for reliable performance year after year, the EZ406 includes five EZ456 cut-off wheels that last two times longer than fiberglass-reinforced cut-off wheels. They also lock in place quickly and are labeled for easy identification to ensure you have the right wheel for the job. Versatile Design for Flexibility This set gives you the flexibility and solid performance you need to complete a range of hobby, repair, and renovation tasks. Use the EZ406 to cut through metal conduit and PVC piping, re-slot screw heads, remove rusty nail heads, or tackle light demolition jobs. With the EZ406 you can also cut aluminum and power through nuts and bolts. About Dremel: A History of Brilliance and Innovation Founded in 1932 in Racine, Wisconsin, Dremel is the industry leader in rotary tools. The company owes its success to the inventive genius of its founder and namesake, Albert J. Dremel. In his lifetime, Mr. Dremel owned 55 patents on a wide range of products from electric erasers to a gas-powered rotary lawn mower. His most famous and important invention was a high-speed rotary tool, dubbed the Dremel Moto-Tool. Compact, lightweight, and perfect for a wide range of jobs, the rotary tool was an immediate hit with hobbyists and eventually became accepted as one of the greatest inventions of the 20th century. Today, the Dremel name remains synonymous with utility, durability, and innovation. What's in the Box EZ402 mandrel and five EZ456 cutting wheels Dremel EZ Lock is the fastest and easiest way to change mandrel-mounted accessories! There is no more screw to lose and no more wrench needed to tighten the screw. The new EZ Lock Cut-Off Wheels last two times longer than current cut-off wheels. The new system even makes to easy to change wheels while you're wearing work gloves. Dremel EZ Lock Cut-off Wheels are labeled for easy identification. The patented one-piece mandrel design means that no screw is needed to hold the cut-off wheels in place. EZ Lock Cut-off Wheels can be used to cut metal conduit, PVC piping, reslotting screw heads, removing rusty nail heads.


Part Number EZ406-02


Item Weight 0.8 ounces


Product Dimensions 1.5 x 0.1 x 2 inches


Item model number EZ406-02


Size Pack of 1


Color Silver


Material Metal


Item Package Quantity 1


Measurement System Metric


Included Components Unit^Instruction Guide


Batteries Included? No


Batteries Required? No


Warranty Description As Labeled


ASIN B000FBLRVA


Customer Reviews 4.6 out of 5 stars 873 ratings 4.6 out of 5 stars


Best Sellers Rank #2,491 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #1 in Power Rotary Tool Cutting Wheels


Shipping Weight 1.12 ounces (View shipping rates and policies)


Date First Available October 2, 2003


Shipping

This product includes free shipping to all US addresses.


Delivery

Unless otherwise stated above, most products arrive within 2-3 business days. Larger items may take 6-9 business days. Tracking information will be automatically provided as soon as your order ships.


View our full shipping policy here.

Returns

This product can be returned within 30 days of delivery for a full refund. Please visit our returns center to begin a return.

View our full returns policy here.

Features

  • One-piece mandrel design eliminates the need for screw and screwdriver
  • Effortless locking and loading - no tiny mandrel screw to lose
  • Includes 1 mandrel and 5 cutting wheels
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.

Description

Dremel EZ406-02 1 1/2-Inch EZ Lock Rotary Tool Cut-Off Wheel and Mandrel Metal Cutting Starter Kit If you regularly use cut-off wheels for your crafting and repair jobs, the Dremel EZ406 EZ Lock Starter Kit is a must-have addition to your home shop or crafting room. By providing faster and easier mandrel-mounted accessory changes without a screwdriver, this kit helps save you time and effort so you can focus on your projects. One-Piece Design for Quick Wheel Changes The EZ406 EZ Lock Starter Kit contains the EZ402 mandrel and five EZ456 cutt-off wheels. The innovative, one-piece design of the EZ402 mandrel makes it easy to EZ Lock compatible accessories--even when you're wearing gloves! With the EZ402, locking and loading is an effortless process that does not require holding the cut-off wheels in place with a screw. This saves you the worry of losing those tiny mandrel screws, and it saves you the time spent using a wrench to tighten them. Long-Lasting, Labeled Cut-Off Wheels Designed for reliable performance year after year, the EZ406 includes five EZ456 cut-off wheels that last two times longer than fiberglass-reinforced cut-off wheels. They also lock in place quickly and are labeled for easy identification to ensure you have the right wheel for the job. Versatile Design for Flexibility This set gives you the flexibility and solid performance you need to complete a range of hobby, repair, and renovation tasks. Use the EZ406 to cut through metal conduit and PVC piping, re-slot screw heads, remove rusty nail heads, or tackle light demolition jobs. With the EZ406 you can also cut aluminum and power through nuts and bolts. About Dremel: A History of Brilliance and Innovation Founded in 1932 in Racine, Wisconsin, Dremel is the industry leader in rotary tools. The company owes its success to the inventive genius of its founder and namesake, Albert J. Dremel. In his lifetime, Mr. Dremel owned 55 patents on a wide range of products from electric erasers to a gas-powered rotary lawn mower. His most famous and important invention was a high-speed rotary tool, dubbed the Dremel Moto-Tool. Compact, lightweight, and perfect for a wide range of jobs, the rotary tool was an immediate hit with hobbyists and eventually became accepted as one of the greatest inventions of the 20th century. Today, the Dremel name remains synonymous with utility, durability, and innovation. What's in the Box EZ402 mandrel and five EZ456 cutting wheels Dremel EZ Lock is the fastest and easiest way to change mandrel-mounted accessories! There is no more screw to lose and no more wrench needed to tighten the screw. The new EZ Lock Cut-Off Wheels last two times longer than current cut-off wheels. The new system even makes to easy to change wheels while you're wearing work gloves. Dremel EZ Lock Cut-off Wheels are labeled for easy identification. The patented one-piece mandrel design means that no screw is needed to hold the cut-off wheels in place. EZ Lock Cut-off Wheels can be used to cut metal conduit, PVC piping, reslotting screw heads, removing rusty nail heads.


Part Number EZ406-02


Item Weight 0.8 ounces


Product Dimensions 1.5 x 0.1 x 2 inches


Item model number EZ406-02


Size Pack of 1


Color Silver


Material Metal


Item Package Quantity 1


Measurement System Metric


Included Components Unit^Instruction Guide


Batteries Included? No


Batteries Required? No


Warranty Description As Labeled


ASIN B000FBLRVA


Customer Reviews 4.6 out of 5 stars 873 ratings 4.6 out of 5 stars


Best Sellers Rank #2,491 in Tools & Home Improvement (See Top 100 in Tools & Home Improvement) #1 in Power Rotary Tool Cutting Wheels


Shipping Weight 1.12 ounces (View shipping rates and policies)


Date First Available October 2, 2003


abunda_amazon_reviews Maybe Im an idiot, but this wheel is incredibly unstable and looks and feels like its going to fly off and hurt someone. the slightest bit of uneven pressure will cause the wheel to wobble out of control as the "locking" piece does not actually lock its just held in place with a weak spring. would NOT recommend.;;Reviewed in the United States on May 9, 2019;;1.0 out of 5 stars;;Do not buy!;;James;;/gp/customer-reviews/RQ0CY11X3583A/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B000FBLRVA;;;The EZ Lock Gartner that holds the cutting wheel to the mandrel seems designed to fail. I have used the older style for years and have never had a single issue with it coming apart. I went through 3 wheels attempting to cut very thin guaged stainless steel. I jad no problem with my older wheels injust ran out of them and need some new ones. This new design almost immediately shears right at the retention ring making the entire cutting wheel useless. Amazon and Dremmel should both be ashamed to be selling such a poorly designed and unsafe tool. Not wasting my time returning it. I will run to Wal-Mart so I can complete my project.;;Reviewed in the United States on July 4, 2019;;1.0 out of 5 stars;;Worst Dremmel product ever;;Adam F;;/gp/customer-reviews/R3NLCSBAEPDLTZ/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B000FBLRVA;;;I was a bit skeptical that what appeared to be just thicker versions of standard Dremel cutoff wheels would do much against a bolt. I was wrong! Works great, we had a Dremel tool clone, but no uber bolt cutters or angle grinder, so this is in our rolling toolbox now with a battery powered Dremel clone! The quick change feature is nice, still a bit of a challenge but better than the tiny little screws on the arbor which are constantly dropping off the workbench when changing cut-off wheels! Suggestion: use only with a plugged in Dremel tool or clone, not a battery powered one. I ran through two battery packs in 10 minutes of cutting and had another 10 minutes to go! Pros: + works very well against hardened steel up to 1" diameter + comparable function to an angle grinder right down to the sparks flying all over the place! So make sure to wear protective clothing! Slower than an angle grinder as you would expect! + EZ lock is great compared to the wee little screws on the alternative Dremel cutoff wheel holders Cons: - not the fastest tool at cutting bolts, expect a minute or two for every 1/4" thickness up to about 1" thick - EZ lock is still a bit of a challenge to change in the field;;Reviewed in the United States on March 17, 2015;;5.0 out of 5 stars;;Makes quick work of nails or stainless steel bolts if you don't have a pair of uber bolt cutters or angle grinder!;;M. R. Smith;;/gp/customer-reviews/R9VVL5LLV9W2C/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B000FBLRVA;;;Fantastic small tool. I needed to cut two garden hose anti-siphon valves that were rusted in place. One issue is that with brute force you may twist the actual bib coming out of the wall and now bigger trouble. My air compressor hose could reach one valve so I started cutting and I was finished in less than 30 seconds of grinding! The second one I would need to use my portable drill, which is much slower. I anticipated a long and difficult task; NOT! It took me maybe 1-2 minutes and it was finished. A pair of pliers or better, a pair of channel locks and you pull back on the small cut portion using the main body as the second "bite" area and it pulls away like soft clay. You can watch this on your favorite video site showing "how to's." Now I installed new Valterra A01-0141VP anti-siphon valves also from Amazon and they work much better than originals. No leaking,easy to install and remove as they are well made plastic. That equals no corrosion and no locking screw to rust onto your hose bib! Good Luck.;;Reviewed in the United States on May 30, 2017;;5.0 out of 5 stars;;Fantastic Tool;;AZ nephew;;/gp/customer-reviews/R2GTEC89NLBNBO/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B000FBLRVA;;;The first one that I used cutting a half inch bolt off the hub came out(see picture) hope that it was just a faulty one. I installed another one on the quick attach and finished cutting the bolt as it was about a quarter left. It worked fine.;;Reviewed in the United States on September 18, 2017;;2.0 out of 5 stars;;First one was a dud!!!;;OLD SCHOOL BOY;;/gp/customer-reviews/R2LED5SSV1BXME/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B000FBLRVA;;;The EZ lock portion on the cutting wheel broke off on each of these making them useless. Was only able to cut through 2x 1/4" bolts before all 5 of the cutting wheels detached from the EZ lock ring. The ease of swapping wheels is not worth the poor quality the connection to the EZ lock.;;Reviewed in the United States on February 26, 2018;;1.0 out of 5 stars;;... wheel broke off on each of these making them useless. Was only able to cut through 2x 1/4" ...;;Remy V.;;/gp/customer-reviews/R2U9GIBL2Y7KTG/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B000FBLRVA;;;My neighbor built a chicken coop for me but the roofing nails were hanging down, waiting to impale one of my girls. I didnt want to invest in a sawzall, because I knew Id never use it again and I have a high speed Dremel. I tried wire cutters to no avail. While this threw sparks all over the place (which scared the crap out of me!) It cut right through those nails like butter, they were very hot when they flew off. Wear long sleeves and goggles if your cutting metal! It did take me a bit to figure out how to get it on the shaft. Even more frustrating after a few months and I had lost the directions! But I did figure it out. Shipping was great and right on time through Amazon. Great product for the price.;;Reviewed in the United States on March 1, 2015;;5.0 out of 5 stars;;Cutting off heavy duty nails;;LeAnn;;/gp/customer-reviews/R1KI9ZYAGHGQYV/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B000FBLRVA;;;Consumable discs I can make a pack of these last several months in my small shop they cut, and grind steel very well. Only caution is never drop one, and never leave them installed on your Dremel while not in use and the lifespan will last as long as they should. Too much pressure and they will come unadhered from the center ring so take it easy this isn’t a bench grinder/saw. Other than that these work well and last awhile so stick with name brand.;;Reviewed in the United States on March 11, 2019;;5.0 out of 5 stars;;Good product don’t drop the arbor;;Fun Hobbies;;/gp/customer-reviews/R3EU95NIBYS34A/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B000FBLRVA

Shipping

This product includes free shipping to all US addresses.


Delivery

Orders placed now will arrive in 6-9 business days. Tracking information will be automatically provided as soon as your order ships.


View our full shipping policy here.

Returns

This product can be returned within 30 days of delivery for a full refund. Please visit our returns center to begin a return.

View our full returns policy here.

Top Amazon Reviews


1.0 out of 5 stars
By James - Reviewed in the United States on May 9, 2019
Do not buy!
Maybe Im an idiot, but this wheel is incredibly unstable and looks and feels like its going to fly off and hurt someone. the slightest bit of uneven pressure will cause the wheel to wobble out of control as the "locking" piece does not actually lock its just held in place with a weak spring. would NOT recommend.

1.0 out of 5 stars
By Adam F - Reviewed in the United States on July 4, 2019
Worst Dremmel product ever
The EZ Lock Gartner that holds the cutting wheel to the mandrel seems designed to fail. I have used the older style for years and have never had a single issue with it coming apart. I went through 3 wheels attempting to cut very thin guaged stainless steel. I jad no problem with my older wheels injust ran out of them and need some new ones. This new design almost immediately shears right at the retention ring making the entire cutting wheel useless. Amazon and Dremmel should both be ashamed to be selling such a poorly designed and unsafe tool. Not wasting my time returning it. I will run to Wal-Mart so I can complete my project.

5.0 out of 5 stars
By M. R. Smith - Reviewed in the United States on March 17, 2015
Makes quick work of nails or stainless steel bolts if you don't have a pair of uber bolt cutters or angle grinder!
I was a bit skeptical that what appeared to be just thicker versions of standard Dremel cutoff wheels would do much against a bolt. I was wrong! Works great, we had a Dremel tool clone, but no uber bolt cutters or angle grinder, so this is in our rolling toolbox now with a battery powered Dremel clone! The quick change feature is nice, still a bit of a challenge but better than the tiny little screws on the arbor which are constantly dropping off the workbench when changing cut-off wheels! Suggestion: use only with a plugged in Dremel tool or clone, not a battery powered one. I ran through two battery packs in 10 minutes of cutting and had another 10 minutes to go! Pros: + works very well against hardened steel up to 1" diameter + comparable function to an angle grinder right down to the sparks flying all over the place! So make sure to wear protective clothing! Slower than an angle grinder as you would expect! + EZ lock is great compared to the wee little screws on the alternative Dremel cutoff wheel holders Cons: - not the fastest tool at cutting bolts, expect a minute or two for every 1/4" thickness up to about 1" thick - EZ lock is still a bit of a challenge to change in the field

5.0 out of 5 stars
By AZ nephew - Reviewed in the United States on May 30, 2017
Fantastic Tool
Fantastic small tool. I needed to cut two garden hose anti-siphon valves that were rusted in place. One issue is that with brute force you may twist the actual bib coming out of the wall and now bigger trouble. My air compressor hose could reach one valve so I started cutting and I was finished in less than 30 seconds of grinding! The second one I would need to use my portable drill, which is much slower. I anticipated a long and difficult task; NOT! It took me maybe 1-2 minutes and it was finished. A pair of pliers or better, a pair of channel locks and you pull back on the small cut portion using the main body as the second "bite" area and it pulls away like soft clay. You can watch this on your favorite video site showing "how to's." Now I installed new Valterra A01-0141VP anti-siphon valves also from Amazon and they work much better than originals. No leaking,easy to install and remove as they are well made plastic. That equals no corrosion and no locking screw to rust onto your hose bib! Good Luck.

2.0 out of 5 stars
By OLD SCHOOL BOY - Reviewed in the United States on September 18, 2017
First one was a dud!!!
The first one that I used cutting a half inch bolt off the hub came out(see picture) hope that it was just a faulty one. I installed another one on the quick attach and finished cutting the bolt as it was about a quarter left. It worked fine.

1.0 out of 5 stars
By Remy V. - Reviewed in the United States on February 26, 2018
... wheel broke off on each of these making them useless. Was only able to cut through 2x 1/4" ...
The EZ lock portion on the cutting wheel broke off on each of these making them useless. Was only able to cut through 2x 1/4" bolts before all 5 of the cutting wheels detached from the EZ lock ring. The ease of swapping wheels is not worth the poor quality the connection to the EZ lock.

5.0 out of 5 stars
By LeAnn - Reviewed in the United States on March 1, 2015
Cutting off heavy duty nails
My neighbor built a chicken coop for me but the roofing nails were hanging down, waiting to impale one of my girls. I didnt want to invest in a sawzall, because I knew Id never use it again and I have a high speed Dremel. I tried wire cutters to no avail. While this threw sparks all over the place (which scared the crap out of me!) It cut right through those nails like butter, they were very hot when they flew off. Wear long sleeves and goggles if your cutting metal! It did take me a bit to figure out how to get it on the shaft. Even more frustrating after a few months and I had lost the directions! But I did figure it out. Shipping was great and right on time through Amazon. Great product for the price.

5.0 out of 5 stars
By Fun Hobbies - Reviewed in the United States on March 11, 2019
Good product don’t drop the arbor
Consumable discs I can make a pack of these last several months in my small shop they cut, and grind steel very well. Only caution is never drop one, and never leave them installed on your Dremel while not in use and the lifespan will last as long as they should. Too much pressure and they will come unadhered from the center ring so take it easy this isn’t a bench grinder/saw. Other than that these work well and last awhile so stick with name brand.

Recent Reviews


1.0 out of 5 stars
By James - Reviewed in the United States on May 9, 2019
Do not buy!
Maybe Im an idiot, but this wheel is incredibly unstable and looks and feels like its going to fly off and hurt someone. the slightest bit of uneven pressure will cause the wheel to wobble out of control as the "locking" piece does not actually lock its just held in place with a weak spring. would NOT recommend.

1.0 out of 5 stars
By Adam F - Reviewed in the United States on July 4, 2019
Worst Dremmel product ever
The EZ Lock Gartner that holds the cutting wheel to the mandrel seems designed to fail. I have used the older style for years and have never had a single issue with it coming apart. I went through 3 wheels attempting to cut very thin guaged stainless steel. I jad no problem with my older wheels injust ran out of them and need some new ones. This new design almost immediately shears right at the retention ring making the entire cutting wheel useless. Amazon and Dremmel should both be ashamed to be selling such a poorly designed and unsafe tool. Not wasting my time returning it. I will run to Wal-Mart so I can complete my project.

5.0 out of 5 stars
By M. R. Smith - Reviewed in the United States on March 17, 2015
Makes quick work of nails or stainless steel bolts if you don't have a pair of uber bolt cutters or angle grinder!
I was a bit skeptical that what appeared to be just thicker versions of standard Dremel cutoff wheels would do much against a bolt. I was wrong! Works great, we had a Dremel tool clone, but no uber bolt cutters or angle grinder, so this is in our rolling toolbox now with a battery powered Dremel clone! The quick change feature is nice, still a bit of a challenge but better than the tiny little screws on the arbor which are constantly dropping off the workbench when changing cut-off wheels! Suggestion: use only with a plugged in Dremel tool or clone, not a battery powered one. I ran through two battery packs in 10 minutes of cutting and had another 10 minutes to go! Pros: + works very well against hardened steel up to 1" diameter + comparable function to an angle grinder right down to the sparks flying all over the place! So make sure to wear protective clothing! Slower than an angle grinder as you would expect! + EZ lock is great compared to the wee little screws on the alternative Dremel cutoff wheel holders Cons: - not the fastest tool at cutting bolts, expect a minute or two for every 1/4" thickness up to about 1" thick - EZ lock is still a bit of a challenge to change in the field

5.0 out of 5 stars
By AZ nephew - Reviewed in the United States on May 30, 2017
Fantastic Tool
Fantastic small tool. I needed to cut two garden hose anti-siphon valves that were rusted in place. One issue is that with brute force you may twist the actual bib coming out of the wall and now bigger trouble. My air compressor hose could reach one valve so I started cutting and I was finished in less than 30 seconds of grinding! The second one I would need to use my portable drill, which is much slower. I anticipated a long and difficult task; NOT! It took me maybe 1-2 minutes and it was finished. A pair of pliers or better, a pair of channel locks and you pull back on the small cut portion using the main body as the second "bite" area and it pulls away like soft clay. You can watch this on your favorite video site showing "how to's." Now I installed new Valterra A01-0141VP anti-siphon valves also from Amazon and they work much better than originals. No leaking,easy to install and remove as they are well made plastic. That equals no corrosion and no locking screw to rust onto your hose bib! Good Luck.

2.0 out of 5 stars
By OLD SCHOOL BOY - Reviewed in the United States on September 18, 2017
First one was a dud!!!
The first one that I used cutting a half inch bolt off the hub came out(see picture) hope that it was just a faulty one. I installed another one on the quick attach and finished cutting the bolt as it was about a quarter left. It worked fine.

1.0 out of 5 stars
By Remy V. - Reviewed in the United States on February 26, 2018
... wheel broke off on each of these making them useless. Was only able to cut through 2x 1/4" ...
The EZ lock portion on the cutting wheel broke off on each of these making them useless. Was only able to cut through 2x 1/4" bolts before all 5 of the cutting wheels detached from the EZ lock ring. The ease of swapping wheels is not worth the poor quality the connection to the EZ lock.

5.0 out of 5 stars
By LeAnn - Reviewed in the United States on March 1, 2015
Cutting off heavy duty nails
My neighbor built a chicken coop for me but the roofing nails were hanging down, waiting to impale one of my girls. I didnt want to invest in a sawzall, because I knew Id never use it again and I have a high speed Dremel. I tried wire cutters to no avail. While this threw sparks all over the place (which scared the crap out of me!) It cut right through those nails like butter, they were very hot when they flew off. Wear long sleeves and goggles if your cutting metal! It did take me a bit to figure out how to get it on the shaft. Even more frustrating after a few months and I had lost the directions! But I did figure it out. Shipping was great and right on time through Amazon. Great product for the price.

5.0 out of 5 stars
By Fun Hobbies - Reviewed in the United States on March 11, 2019
Good product don’t drop the arbor
Consumable discs I can make a pack of these last several months in my small shop they cut, and grind steel very well. Only caution is never drop one, and never leave them installed on your Dremel while not in use and the lifespan will last as long as they should. Too much pressure and they will come unadhered from the center ring so take it easy this isn’t a bench grinder/saw. Other than that these work well and last awhile so stick with name brand.