Search  for anything...
AnoleX

CNC Router 3060-Evo Pro, All-Metal XYZ Axis Dual Steel Linear Guides with 300W Spindle, Z-Probe, Limit Switches, E-Stop, ideal for Aluminum, Copper, Stainless steel, Wood, Acrylic, MDF

  • Based on 0 reviews
Condition: New
Checking for product changes
$649.00 Why this price?

Buy Now, Pay Later

As low as / mo
  • – Up to 36-month term if approved
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout.

Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

30-day refund/replacement

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: Only 1 left in stock, order soon!
Fulfilled by Amazon
Arrives Friday, Jun 27
Order within 8 hours and 27 minutes
Available payment plans shown during checkout

Recently Viewed

Style: 3060-Evo Pro


Features

  • Upgradeable Ball ScrewThe CNC Router 3060-Evo Pro XYZ axis is equipped with a T8 screw as standard, which can be upgraded to 1204 ball screw.
  • ALL- Dual Linear Guide RailsThe XYZ axis adopts 15*10mm dual steel linear guide rails, which are high-precision and stable. Anti-Backlash Nut Block can adjust the gap, which can effectively eliminate hysteresis and avoid metal friction noise between the copper nut and the screw.
  • Upgraded Stepper Motor CNC Router 3060-Evo Pro features a powerful Nema 17 stepper motor, with increased torque from 420mN.M to 650mN.M. This results in faster cutting times and fewer errors, making it possible to work with harder materials - not just wood and similar substances.
  • Increased Precision and Stability The XYZ axes of CNC Router 3060 Evo Pro feature dual linear guide rails and T8 lead screws, fixed gantry structure that significantly reduces errors caused by shaking and tilting. The rigidity is stronger, enabling the machine to cut metal materials like steel, aluminum, and copper, wood and acrylic etc.
  • DimensionsThe XYZ travel of the CNC router is 287*600*73mm, and the size of the working table is 300*600m. Machine size is (X*Y*Z) 500*1000*420mm.
  • Complete FunctionsDesktop CNC router 3060 Evo Pro comes with a variety of accessories including XYZ axis double limit switch and Home, emergency stop switch, Z probe, ER11-1/8" chuck, and more. It supports grbl software for various operating systems like Windows, Linux and Mac.
  • Easy Assembly and SupporWith pre-assembled main parts and a clear cable management system, CNC 3060 Evo Pro is easy to assemble. Additionally, a paper user manual and assembly video ensure easy setup.

Description

CNC Router 3060-Evo Pro with a spindle speed of 10000RPM and a working area of 11.323.622.87inch (28760073mm), this machine has perfect function and rigidity, making it an ideal choice for CNC hobbyists looking to explore the world of CNC routing. Some parts require assembly, but don't worry - we're here to help every step of the way. This machine is compatible with Windows, Linux, and Mac OS, and GRBL 1.1h control board, giving you the flexibility to work with a variety of operating systems. Looking to add laser engraving or cutting capabilities? We've got you covered! The control board has a reserved 24V 3Pin laser interface, but an additional laser module is required to bring your designs to life. And with its ability to engrave/cut steel copper aluminum and plastic parts, PCB design, and even wood, there's no limit to what you can create with this hobby CNC router machine. Is this machine suitable for beginners? Absolutely - the machine's functionality and rigidity are perfect for new users. Keep in mind that some personalized G-code generation will require a learning curve, but there are plenty of resources - including YouTube - to help you get started. If you're looking to engrave aluminum or brass, we recommend depth per pass ≤0.5mm and feed rate≤500mm/min. If you upgrade the spindle to a trimming machine, you can achieve even better results with depth per pass ≤6mm and feed rate≤600mm/min. If you ever encounter any technical issues or damaged parts, just let us know. We're committed to providing fast, accurate, and friendly customer service - within 24 hours, guaranteed. What's in the package? 1x 3060-Evo Pro CNC Router Kit

Manufacturer: ‎AnoleX


Part Number: ‎3060-Evo Pro


Item Weight: ‎47.4 pounds


Product Dimensions: ‎39.37 x 19.69 x 16.34 inches


Country of Origin: ‎China


Item model number: ‎3060-Evo Pro


Size: ‎3060-Evo Pro


Style: ‎3060-Evo Pro


Material: ‎Aluminum


Power Source: ‎ac/dc


Wattage: ‎300 watts


Item Package Quantity: ‎1


Included Components: ‎CNC Router Machine


Batteries Included?: ‎No


Batteries Required?: ‎No


Date First Available: January 10, 2023


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Friday, Jun 27

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Sturdy, Accurate, Everything You Need To Get Started
I have several CNC machines ranging from micro mills up to a 6-foot bed AC servo driven precision mill. Opening the box you are greeted with very well packaged parts and a beautiful, large, full color, illustrated instruction manual. This is not your regular useless Chinese manual, oh no, it is a professional step by step manual with large illustrations and photographs that detail exactly what to do. ** OUT OF THE BOX ** Assembly is easy and actually enjoyable. All the wires are perfectly labeled both on the wires and on the controller. The overall assembly is very quick and offers acceptable precision following the instruction manual. The construction quality is well beyond what one would expect from a small Chinese machine. The linear guides are much sturdier and way more accurate than what is offered by the competition. Yes, round rods are used on the base, but they are 12mm rods unlike the 8 and 10mm rods found on other machines. Each axis is controlled by a NEMA 17 stepper motor attached to 8mm threaded rod lead screws. The steppers put out enough torque to comfortable machine just about anything as long as you use the proper feeds and speeds but don't expect it to fly through hard wood or metal like a 100k dollar machine will. The accuracy and repeatability out of the box is very good for its price range. The lead screws are milled much better than standard Acme threaded rod used on many other machines. Transferring the motion from the screw to the axis is accomplished with plastic nuts that have a nice anti-backlash adjuster built in that actually works quite well. Each axis also has a hand wheel/knob attached making it easy to manually position the machine when needed. There are also limit and home switches on each axis. You can really tell thought and care was put into this machine just by looking at the nice covers over each limit/home switch. The 300W spindle seems small and cheap BUT I measured the runout, and it is actually pretty accurate, almost undetectable. It has just enough power to do any job at a good pace, not fast but not slow, I do wish it was at least 500W though. The controller is outfitted with an Atmel Mega 328 microcontroller running GRBL. While it is not my favorite chip to see in a machine it does reliably get the job done and is much more stable than say an ESP32. On the plus side is the Mega 328 uses 5 volts whereas many other chips use 3.3 volts. For this use case that means extra chips are not required to convert the 3.3 volt signals to 5V signals which is the most common voltage for stepper motor driver signals. Overall, out of the box experience is very good especially compared to other machines in this price range. ** UPGRADES ** Several upgrades are available, but they are by no means requirements. The larger bed extends the working size and increases total rigidity, it's very fast and easy to install as well. The larger spindle mount makes it simple to install a larger 600W to 1.5Kw spindle. A laser head that simply slides into the motor holder is available which much to my surprise actually works very well for both engraving and cutting. Several companies offer higher toque NEMA 17 stepper motors that are easy to bolt right in which goes nicely if you upgrade the spindle. Add 5mm ID thrust bearings between the shaft collar and the stepper motor to achieve a prefect 0 play axis (I used 3 thrust bearings on each motor and sandwiched them to the motor housing using the shaft collar), KFL08 bearing blocks which are very common are used on each axis and doing this will remove the unavoidable play inherent to their design. ** ASSEMBLY TIPS ** Do not use Loctite on any of the bolts, they don't need it. Use machinist squares to ensure the gantry is perfectly positioned. Use a tramming tool to adjust the gantry and spindle for even more accuracy. Clean off the factory grease and apply Slickoleum to the linear rails and the lead screws. Do the thrust washer upgrade mentioned above. ... show more
Reviewed in the United States on July 19, 2023 by ByronAP
    • Promising machine, good tech support
Style: 3030-Evo Pro
Revision to previous review After initial problems, Arlen patiently walked me through the troubleshooting process and correctly diagnosed the issue - a faulty power supply. The machine is now working as intended, and I am looking forward to learning how to use it. I think the machine itself is worthy of a five-star review. Details provided below keeps it below that. 4.5 stars, but that's not an option is it? Previous review The condensed version – The machine looks and feels very solid and I am confident it will perform well once the bugs are worked out. The nicely-printed color manual is very sketchy and leaves out key details. Whoever prepped the motherboard needs to pay closer attention to what they are doing. The long version Unpacking and assembly went smoothly enough, but as mentioned, the instructions were sketchy. For instance, it would have been nice if they had mentioned that the two X-axis limit switches could be plugged into either of the two X-axis limit switch sockets (same with the Y and Z limit switches), but no, so I just plugged them in and hoped for the best. Instructions for the driver installation and COM port settings left out a key instruction, namely to connect the machine to the computer and turn it on. Fortunately a quick reference to the need to do that in someone’s unboxing video clued me in. Also, instructions in the manual for how to access the Device Manger were incorrect but I figured it out. Instructions for how to access settings to check the COM port settings were incorrect, leaving me to figure it out on my own. Necessary commands such as Unlock, Home, Zero XY, and Zero Z were represented by icons and not identified specifically. Only by hovering my cursor over the icons was I able to identify them. This was mentioned on the previous page, but an arrow or circle on the picture below the instructions would have been helpful. The instructions under “Make Your First Cut” failed to provide any instructions for mounting the bit. I just did what I made sense and, again, hoped for the best. In the Candle interface, I found I wasn’t able to move the bed (Y-axis). I was able to make sure the motor worked by plugging it into the X-axis socket, but could get no love from the Y-axis socket, so I emailed tech support. The next day I received an email from Arlen telling me to check to see if the driver chip was plugged into the Y1 or Y2 socket. Sure enough, it was in the Y2 socket, so whoever assembled it at the factory was not paying attention. Switching it to the Y1 socket gave me control of all axes. As directly as he got to this solution suggests to me that it is not an uncommon issue. Once positioning the bit and setting the zero point as instructed, I hit the Send button, but got various error messages - Error 9 and serial port errors. The troubleshooting section of the manual covered only 6 issues, so I sent another email to tech support. More to follow I guess. It’s really a shame they spent money printing such a slick, well-photographed, but sketchy and poorly-written manual. I am used to downloading manuals. It seems that it would make more sense for them to use this approach so they can make corrections and updates rather than leaving their clients with this mess. At the very least, they should have had an outsider go through the assembly and use processes to point out the issues, but it looks like the manual was written by someone who does not realize the importance of what he/she was leaving out. This is an entry-level machine, but Anolex assumes the user will be savvy enough figure things out on their own. I have been unable to find any dedicated support forum aside from the 134-member Facebook group. At this time I am waiting to hear back from tech support and am saving the box for return if it comes to that. ... show more
Reviewed in the United States on July 19, 2024 by jojo

Can't find a product?

Find it on Amazon first, then paste the link below.