Search  for anything...
BIGTREETECH

BIGTREETECH New Upgrade EZ2209 Stepper Motor Driver with EZ-Driver Connection V1.0 Support UART Mode for SKR V1.4 Turbo, SKR 2, SKR 3 SKR Pro V1.2, Octopus, Octopus Pro 3D Controller Board (5 Sets)

    • Based on 156 reviews
Condition: New
Checking for product changes
$30.99 Why this price?

Buy Now, Pay Later

As low as $7 / mo
  • – 4-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: Only 1 left in stock, order soon!
Fulfilled by Amazon
Arrives May 24 – May 25
Order within 10 hours and 8 minutes
Available payment plans shown during checkout

Recently Viewed

Style: 4. EZ2209*5+EZ-Driver Connector*5


Features

  • Why use EZ Drivers? Because 40% of users have damaged the driver due to the wrong installation. It will damage the control board or even more damage. Using EZ Drivers can improve the experience of more users.
  • The newly developed board frame is used to match the new connector to improve the user experience. Using a new customized heat sink, while enhancing the heat dissipation capacity, it protects the driver chip from external damage.
  • Support StealthChop, which can realize the mute lock of the motor and the mute when running at low speed. It is recommended to select when the maximum speed of the motor is lower than 300RPM.
  • Supports SpreadCycle, which can achieve mute and low power consumption in a wide range of speed and torque. It is recommended to select when the maximum speed of the motor exceeds 300RPM.
  • Support StallGuard2: when there is no limit switch, it can be used for motor stall detection (limit switch is recommended).

Description

Many users don't understand why to use EZ driver? Also don't understand the benefits of developing EZ drivers.Because data surveys show that more than 40% of users have damaged drivers due to installation errors. It will directly damage the control board or even cause more damage. If you use EZ Drivers, you can not only reduce this concern, but also improve your experience. Because EZ Drivers adopts the newly developed board and frame and matches the new connector, it allows customers to experience the aesthetic feeling while avoiding the situation that the old driver pins hurt their hands. Precautions for using EZ2209 Drivers: 1. Be sure to disconnect the power supply before installing the driver to prevent the driver from burning; 2. Before installing the driver, be sure to confirm the direction of the driver to prevent the driver from not working due to reverse connection; 3. Please do not plug or unplug the drive module with power on, so as not to cause damage; 4. The EZ Drivers have installed the heat sink before leaving the factory. Please do not remove the heat sink easily. If there is no thermal conductive material, the heat dissipation effect will be reduced.


Package Dimensions: 3.78 x 2.24 x 1.34 inches


Item Weight: 2.08 ounces


Manufacturer: BIGTREETECH


Country of Origin: China


Item model number: KINGPRINTER-1010861


Batteries required: No


Included Components: 3D Printer


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: May 24 – May 25

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • EZ Drivers are a great innovation. SKR 3 EZ is feature loaded and should be your next upgrade!
Style: 1. SKR 3 EZ+EZ2209*5
Review Image by Adyson88 Adyson88
There is a lot to say about this board as I have been a BTT supporter for awhile with their SKR Mini e3 boards as well as their TFT screens. Since this was not as "plug and play" there were some learning curves, but nothing that was very difficult to figure out. Here are some of my highlights and lowlights from my experience with this board Pros: EZ Drivers: It's in the name. These are literally just plug in and they work. No more moving pins or plugging things in backwards. They go in one way and make driver installation completely fool proof. The TMC2209 drivers do allow for sensor less homing, but I chose not to enable that on this board and just use endstops and firmware limits for my bed size. They are completely silent so you don't have to worry about any noise coming from the printer which is as to be suspected with the TMC2209s. This board also has 5 independent drivers so you can run G34 Auto Align on your dual lead screws which is a gamechanger for leveling and accuracy. Fan Control: 3 controllable fans on this board is a great option so you don't always have to have fans running when the printer is idle. All my fans are 24v so there was no need for me to utilize the different voltage but having that option is very welcome! Control Board: 32-bit ARM Cortex-M7 board is almost overkill, but that's fine by me. For my needs, it will never have any issues and will process whatever, whenever I need it to. CONS Firmware: If you are not familiar with compiling your own firmware, you will not find precompiled versions for this board as readily available as you may think. I'm sure over time there will be plenty out there but if you are not comfortable creating your own firmware you may want to do a little research or be prepared to learn. This is not as plug and play as the SKR Mini E3 boards. Quality Control: I don't know where to put this one, but the first board I received was clearly a board that was returned by someone. There were no cables, no duck, and multiple drivers were loose in the box. At first, I thought that I had enough cables and ducks so it wasn't a big deal but after wiring the board up, it didn't work whatsoever. I triple checked the pinouts, did my diagnostics and got NOTHING. After going back and forth with customer service to no avail, I just returned it for a new board. The replacement worked perfectly wired the exact same way and it came with all the products I was expecting. Thankfully I bought this on Amazon and could return it. This was concerning since I bought this through BIGTREETECH's Amazon store but I guess they are sending out possibly returned product as new which is concerning. Overall, the board itself is GREAT and I would recommend it to anyone looking to get some additional features and possibly run Klipper, Sensorless Homing, or Dual Z Leads. I can overlook the initial product issue since it was taken care of, but I didn't like that returned product was being shipped for new orders. This needs to be resolved so the same thing doesn't happen in the future. I still am a BTT fan overall because the product speaks for itself at the end of the day! ... show more
Reviewed in the United States 🇺🇸 on March 13, 2023 by Adyson88 Adyson88
    • Amazing upgrade.
Style: 1. SKR 3 EZ+EZ2209*5
I bought this as a replacement on my ender 3 pro. It had an original 4.2.2 (loud) board. This is dead silent. I forget I’m printing sometimes as I don’t hear it. There were a few connectors I needed to change out but not too bad. You will need a new case to store the board in. The original one on ender 3 pro is too small. ... show more
Reviewed in the United States 🇺🇸 on March 17, 2023 by Jeremy Austin
    • Drop in replacement for the SKR 1.4 boards
I bet you knew that already. The SKR 2.0 is a direct replacement for the SKR 1.3 / 1.4 boards, with some added features. There are some reviews that rightfully aren't as flattering. In my opinion they refer to the version "A" boards that had problems with the stepper sticks being damaged in a certain configuration. The board I am reviewing here is the "B" board. Since I installed it, I had no undesired issues so far. I like the fact that there are now 3 controllable fan header. (Part cooling, extruder cooling and controller enclosure fan, in my case). A slightly beefier driver for the NEO LED's allows for direct hookup of probably 10 LED's. At least I had no issues with that number. I am using a P.I.N.D.A 2 probe, although I have yet to see significant improvements in bed leveling accuracy. The probe is connected to the Z end stop and the second thermistor input (TH1) and I performed a calibration / compensation. (takes a long time) I believe improvement is so minute that it really doesn't show. Perhaps, changing temperatures on the built surface during ABL will improve mesh data accuracy slightly. My guess is that the independent dual Z stepper control for gantry leveling has a say in that, too. It might just be me, but I think the communication between the TFT and the main board is faster. There used to be a pretty good delay when switching the NEO LED's during print. Now it is mitigated. I only vaporized one of the fan controlling transistors, but this was my own fault not triple checking the wiring against the carriage assembly. Unfortunately, I overlooked the pinched wire to the part fan cooling wiring and viola the transistor in question produced a familiar smell. I caught it soon enough and was lucky it only took this transistor into silicon heaven. These are actually high current (believe 4A peak) transistors in a SOT-23 case. Now I have 99 more transistors in my component box. After replacing the broken one, all is working fine again. Phew, I could have taken out the entire board with that mishap! All over the SKR 2 Version "B" board is performing better than the SKR 1.4 Turbo, thanks to the faster processor speed. I get impatient if I run into lacking hardware, the SKR 2 helps me to overcome my impatience. Satisfied with the purchase, thinking of getting another one. ... show more
Reviewed in the United States 🇺🇸 on September 14, 2021 by Oldguy
    • Know what your doing before you buy
Style: 5. SKR 2+TMC2209 V1.2*5
If your looking for a drop in upgrade, your going to have a bad time. As a novice when it comes to all thing 3D printer, I decided I would upgrade my cr10 v3 with this board. I knew I would have to do some case mods to get it to fit, but the real tricky part was getting the firmware to work. If you do not know how to edit your own firmware and troubleshoot problems as they come (such as knowing how to reverse steppers and end stops) then I would stay away. It took me literal weeks of on an off tinkering and troubleshooting to get this working. If your up to tinker and learn, then this board works great. I’m not a huge fan that the sd card reader doesn’t auto eject, but has to be pulled out manually, but that’s something I can work around. The TMC 2209s are a great compliment, meaning the only part of my printer I hear are the fans. The stepper reverse protection is amazing and worked as intended, I accidentally did install a stepper motor backwards and it told me which one it was so it was easy to fix. One thing to note is that you will need to have the pin diagram next to you as many of the connectors block the silk screening so you can’t see what is positive or negative. Looking past all of the issues I had, which were entirely due to my lack of experience, the board is great, and does exactly what you want it to, assuming you know how to edit firmware to suit your needs. ... show more
Reviewed in the United States 🇺🇸 on August 18, 2021 by Ryan DeJong

Can't find a product?

Find it on Amazon first, then paste the link below.