Search  for anything...
BIGTREETECH Direct

BIGTREETECH Direct TFT70 V3.0 Two Mode Ultra Clear 3D Printer Display Screen Support Model Preview for Upgrade 3D Printer

  • Based on 288 reviews
Condition: New
Checking for inventory...

Notify me when this product is back in stock

$85.99 Why this price?

Buy Now, Pay Later

As low as $14.33 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: Unavailable
Fulfilled by Amazon
Available payment plans shown during checkout

Recently Viewed

Style: TFT70 V3.0 (GD)


Features

  • MCU: ARM 32 bit and 168MHz STM32F407VGT6 of Cortex-M4 seriesUART serial screen and 12864-like screen can be selected in two working modes, with higher compatibility
  • Encoder Design Colors Can Be Switched at Will. 3)Reserve the WIFI interface, support the external WIFI module to realize the WIFI function;
  • Serial screen mode supports two printing methods: SD card and U disk,Support up to 15 languages,easy to use
  • LCD12864 mode including EXP1EXP2EXP3,EXP1and EXP2 is for LCD screen of ordinary motherboard, and EXP3 is for LCD screen of E3 series(like: SKR MINI E3SKR E3 DIP etc.).

Description

🍀Ⅰ. Introduction BIGTREETECH TFT70 V3.0 is a display screen with middle size, two operation mode and super clear launched by the 3D printing team of Shenzhen BIGTREE technology co., LTD., which can perfectly replace LCD12864. 🍀1. Features ： 1. MCU: ARM 32 bit and 168MHz STM32F407VGT6 of Cortex-M4 series. 2. More convenient operation: upgrading the firmware by SD card. 3. Stronger compatibility: two working model, UART screen and screen of 12864 types. 4. UART screen supporting SD card and U disk. 5. Having WIFI port, plugging WIFI module can achieve WIFI function. 6. Having filament runout detection function port (FIL-DET). 7. Having function port for automatic shutdown after printing(PS-ON)； 8. LCD12864 mode including EXP1、EXP2、EXP3，EXP1and EXP2 is for LCD screen of ordinary motherboard, and EXP3 is for LCD screen of E3 series(like: SKR MINI E3、SKR E3 DIP etc.). 9. TFT touch screen: UART screen RS232 port. 10. Having 2 UART port for users DIY. √2. Parameters ： Appearance size: 196100mm Installation size: 18892mm MCU: STM32F407VGT6 Screen display area: 153.8485.776mm Display resolution: 800（H）3（RGB）480（V） Backlight: 21 white LED lights √Power input: DC 5V Logic voltage of SD card: 3.3V and 5V (like: supporting motherboard with control chip MEGA2560, with stronger compatibility) Thank you for your support, If you have any question within using,pls feel free to contact "BIGTREETECH Direct" via Amazon directly, we till get back to you within 24 hours.


Package Dimensions: ‎9.6 x 5 x 2 inches; 13.62 Ounces


Item Weight: ‎13.6 ounces


Manufacturer: ‎BIGTREETECH Direct


Date First Available: ‎June 12, 2020


Frequently asked questions

This product is currently out of stock. Please check back later for shipping info.

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • Afterpay Financing
  • PayTomorrow Financing
  • Financing through Apple Pay
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Easy Install
Style: TFT35 E3 V3.0.1
Review Image by Roaster Roaster
Review Image by Roaster Roaster
Review Image by Roaster Roaster
Review Image by Roaster Roaster
Review Image by Roaster Roaster
There are detailed instructions on BTT github to set up Marlin 2 so all the dependencies are enabled, and the display fired right up first try. I did not update the display firmware yet, as the oem fw works out of the box to get started. I'm using the SKR V1.4 Turbo motherboard. The old-style ribbon cables are still connected along with the UART wires, as the display can switch back and forth from touch screen mode to legacy text mode. Colors of the legacy mode are adjustable with background and font choices. Various themes for the touch screen mode are available, and the icons can be edited to suit your needs. When you change the SD Card to Onboard in Marlin you end up with three ways to access g code programs, SD at display, USB at display, and motherboard micro SD. Touch screen function is not available when using legacy display mode. My only gripe is the touch response, as it is not at all sharp and snappy. I often get a double-tap effect because I have to tap and tap and tap and hold for a bit and eventually it clicks but gets the next screen button too. I'll try a touch stylus to see if that helps response, and there's a calibration routine that came up by accident once but upside-down. Had to reboot to get rid of it. On reboot the display claims there's no printer attached for a few seconds then it clears and all is well. The display can use 250000 or 115200, selectable on the display settings. The first time I ran bed leveling it ran twice because I accidentally double tapped the button. The buttons just send G-code commands so the code runs sequentially as always. Manual axis moves will go plus and minus, but the button response makes it less fun. If the touch screen response doesn't improve I'll run legacy mode and print from there. One telling remark I read was that in UART mode the motherboard sees the connection as another computer, just like a pc hookup to the usb port. The display has sockets for wifi module, filament runout, power monitor and control, and extra UARTs for whatever. The product appears well made and the screen is straight. I'm designing a new box to suit my printer layout. This product has the best help sources ever. https://github.com/bigtreetech/BIGTREETECH-TouchScreenFirmware https://www.youtube.com/watch?v=57f-sG0nFeM Edit: after calibrating the touch panel it works a lot better, but a stylus for TS works best, and no fingerprints. The control box is my design, and the purple thing is a base full of bb's and epoxy. ... show more
Reviewed in the United States on April 22, 2021 by Roaster Roaster
    • 3rd time is not the charm
Style: TFT35 E3 V3.0.1
I have purchased a LOT of bigtreetech's boards, lcds, and tmc drivers. I just received a tft35 v3.0 with a loose lcd screen. Everything works but the lcd is ready to fall off. I am done with BTT merchandise. This is the 3rd lcd I have purchased that was bad. I got three weeks of service from one unit before it quit. I have three skr boards in the junk pile that have some sort of problem with each. NOT HAPPY!! When I try to reach out to support I get no answers from anyone. ... show more
Reviewed in the United States on December 5, 2020 by John J.
    • This feels like a ‘beta’ project that isn’t finished
Style: TFT35 E3 V3.0.1
I ordered this because I wanted to be able to navigate my printer menus quicker, and easier, with color. In achieved those needs. However I began noticing little design features that I didn’t care for. Somethings seemed a bit loose. Other things didn’t seem refined or quite finished. I had multiple issues with this touchscreen in combination with other things I had set up on my printer such as Octoprint print server, time remaining on prints, etc.. I also had multiple issues where the printer wouldn’t connect or wouldn’t function at certain points. Sometimes it would get stuck and wouldn’t flip back to touch mode. It’s just not a great product. I ended up uninstalling and going back to stock after a couple of months of forced use. ... show more
Reviewed in the United States on June 28, 2021 by Josh H.
    • Good product, but lack of process quality control
Style: TFT35 E3 V3.0.1
Review Image by Crystal L Crystal L
I bought this BTT TFT35 E3 V3.0 screen to retrofit my CR-10S 3D printer, which uses the same12864 LCD screen of the Ender 3 (E3 in the model name). The product itself is really good, easy to install, and even easier to flash the firmware. I spent about half a day to tweak it and make sure it would work with my CR-10S stock board allowing me to control it from the LCD menus. After getting everything ready to go, it was time to put it in the control box. Everything felt in place, screws were aligned. The only thing I had to do was to flip the board connectors to match the ribbon cables orientation. All the excitement was gone when I turned it around just to see that the screen was crooked and misplaced. After some digging, I found out that this is a recurring issue with this screen. At first, I thought it could be the control box LCD cut out (very unlikely). Then I designed a new cover test based on the specs and dimensions from the BTT website. Same problem. This is way too disappointing... I would give this a 5 star but, since overall appearance is also important to me since I am paying for it, I decided to give it 3 stars only. ... show more
Reviewed in the United States on June 10, 2020 by Crystal L Crystal L
    • favorite display for e3
Style: TFT35 E3 V3.0.1
i love these. this one is now on a friend's printer. he was not sure, but when he saw it was like ok. i need this.. these do require you to custom compile marlin 2 to use touch screen options as they talk serial to main board. aka rx/tx after you have that option turned on it'll talk to your board perfectly disregard the bad comments. got three fully functional installs and love all three. ... show more
Reviewed in the United States on December 16, 2021 by DavidsG33k
    • Like the screen, but USB port DOES NOT WORK
Style: TFT35 E3 V3.0.1
The media could not be loaded. I really like the features it add, such as easier movement of the motors and such. Quicker UI in general. But, was extremely frustrated and disappointed to learn that the USB port is not functioning properly. The video attached was from BEFORE we figured out the issue. This has been reported by a few people online. We've tested multiple dongles and cross checked the GCODE on other devices. Also, it works if the GCODE is placed on the Micro SD Card and inserted into an SD Card adapter, but not with the Creality provided USB adapter. Also, using MERLIN, the mainboard MicroSD port still works fine with the same GCODE. There is zero question: the USB port that is defective. I would like my display replaced ASAP. ... show more
Reviewed in the United States on May 28, 2020 by BGG
    • Buyer beware
Style: TFT35 E3 V3.0.1
I received the product damaged, when I tried to use it, it would overheat. I tried to reach out to the company and they were very rude. I would not recommend purchasing this item.
Reviewed in the United States on June 5, 2020 by animal0311

Can't find a product?

Find it on Amazon first, then paste the link below.
Checking for inventory...