Search  for anything...
ANYCUBIC

ANYCUBIC Wash and Cure Plus, Largest 2 in 1 Wash Cure Machine for Saturn Mono X LCD SLA DLP 3D Printer Models with L-Shaped Strip Curing Light and Washing Size 192mm(L) x 120mm(W) x 290mm(H)

    • Based on 3,122 reviews
Condition: New
Checking for product changes

Notify me when this product is back in stock

$249.99 Why this price?

Buy Now, Pay Later

As low as $41.67 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: Unavailable
Fulfilled by Amazon
Available payment plans shown during checkout

Size: Wash and Cure Plus


Features

  • 2-In-1 Wash and Cure Station Dual functions of cleaning and curing can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing; A professional solution to the messy clean up job of your fabulous prints
  • Largest Wash Cure StationIt has a large washing volume of 192mm(L) x 120mm(W) x 290mm(H) and curing volume of 190mm(D) x 245mm(H), so you can wash cure models printed by large resin printers such as Photon Mono X, which can dramatically simplify messy post-processing
  • Real 360 CuringThe 360auto-rotating curing platform, equipped with L-shape strip light and reflective mirror sticker, enables the wash and cure machine to realize a real thorough curing; Prominently, its L-shaped strip light make the top UV lamp adjustable, solving the problem of model top part curinguspension washing, directly hang the print platform on the basket or cleaning stand to clean, reducing exposure to resin
  • Two Washing Modes A. Basket washing, remove the model and put it into the basket for direct cleaning; B. Suspension washing, directly hang the print platform on the basket or cleaning stand to clean, reducing exposure to resin
  • Anti-UV Light HoodThe transparent cover of this wash cure machine can block up to 99.95% of ultraviolet rays with a wavelength of 405nm, thus able to be effective in high resin solidification rate; and adopts enclosed washing busket to prevent liquid splashing and volatilization

Product Dimensions: 20 x 10 x 10 inches


Item Weight: 20.7 pounds


Date First Available: March 13, 2021


Manufacturer: ANYCUBIC


Frequently asked questions

This product is currently out of stock. Please check back later for shipping info.

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Klarna Pay in 4
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Product is great (when it works)
Size: Wash and Cure Plus
Pros: *The auto fill feature is wonderful....until the internal pump started leaking resin and completed fried the circuit board of the pump itself. Before that it was nice to be able to start a big print walk away and know that I didn't have to worry about running out of resin. *The ability to adjust all the printing settings in mid print is nice, however, can cause some quality differences in the print itself. *Started the print is rather easy, plug in the supplied thumb drive select the file (which also is a small image) and begin your print. Cons: *No matter what I do the actual build plate will not center on the lcd screen. I have about .5 to 1 inch of extra screen on the left side and on the right the plate will sometimes overlap the metal frame surrounding the lcd screen. *Why have a slot for an IP address with no wifi capabilities? *The auto fill resin bottle holder is on the back of the printer, why not provide the option of the back or the sides? Auto fill feels like a double edge sword with the resin bottle being in the back of the printer. Less time spending refilling the tray but more time shifting the printer around ensuring that you don't mess up the refill wiring and tubes in the process. *Speaking of auto fill, the pump for the auto fill (which I have used a total of maybe 6 or 7 times had a catastrophic failure due to the interior gaskets that circulates the resin failing and leaking all over the circuit board and causing it to short out. There's also no gasket on the base of the refill that screws into the black exterior pump. So when it failed it leaked out the bottom of the housing. Luckily it did not leak into the lcd screen. *The warranty should be something else to look into due to just the refill pump failing can cause the entire printer to go bad and you get only 3 months for the lcd screen and 6 months for the motherboard. It only not more than 2 months of actual usage before the failure. Now I am waiting for a response for Anycubic to see if they will honor their warranty. Even though there are lots of cons about the machine I am still learning how to use it and still rather impressed. I am sure once all the chipped cogs get switched out of the system it'll be even more enjoyable. ... show more
Reviewed in the United States on November 1, 2023 by Mr. & Mrs. Dodd
    • Si perfectamente.
Size: Wash and Cure 3.0
Cuando me disponia a realizar el primer secado, notamos que la lampara no ajusta lo que ocaciona que no encienda, si alguien sabe una solucion les agradesere. De resto la maquina funciona excelentemente. La recomiendo. Nota: el error fue mío, toca forzar la confección de la lampara para que quede perfecto, me encantó, gran ayuda para el proceso. ... show more
Reviewed in the United States on November 11, 2023 by Orlocker
    • Not worth it BUT upon further review !!
Size: Wash and Cure 3.0
I bought this in a bundle back in February. It worked fine for a while. Then I didn't make anything for a few months this summer. Now I printed some stuff the other day and the darn thing would just short out when I hit the start button. It would turn back on when I unplugged it and re plugged it in. But would do the same thing again. And it didn't matter if i tried the wash mode or the cure mode. So it is not worth the price at all for a dozen or so times i used it. September. Now there customer service contacted me I was in contact with the nicest woman (Jane). I told her my problem and sent her some video showing the problem. She said she could send some replacement parts or sell me a new one at a discount. I chose the parts. She sent more parts than expected and it is now working. I have to say this company has the best customer support I have seen in forty years. You will never get this kind of service from the big companies. I changed my rating to a five. User please unplug the unit when not using. maybe i had a power surge that caused this. Thanks again Jane you are the best. ... show more
Reviewed in the United States on September 6, 2023 by william lawson
    • Works well but takes up too much space
Size: Wash and Cure 3.0
There are tabs near the top of the tank that stick out just enough so the lid won't fit while the tank is installed, thereby doubling the surface area this thing requires because now I need counter space for the lid AND the unit. This is both inconvenient and an eyesore. I wish Anycubic hadn't made so many sacrifices to hit that low price point. ... show more
Reviewed in the United States on November 10, 2023 by Orn
    • Does the job
Size: Wash and Cure 3.0
Used to wash and cure a couple of prints i made and work pretty well. Needed a lot of alcohol to use even for small prints because of the size but better being a little too big then too small in my opinion. Cures pretty quick instead if waiting to dry naturally around 39 to 40 min for me. Pretty loud compared to the printer though. ... show more
Reviewed in the United States on November 9, 2023 by Easy to use product for someone starting out. Have done a couple of prints already, straight forward process and a lot of support on there website.
    • Great little wash and cure
Size: Wash and Cure Plus
This wash and cure is what I needed to help getting my 3d print cured. No more using the sink to the hassle of getting the resin gunk off. Just use the mean green and 91% IPA and it's all good.
Reviewed in the United States on November 7, 2023 by Adam Bartoli
    • Flex light problems
Size: Wash and Cure 3.0
Great perfect size unit. But the flexible arm light doesn't fit properly to engage connection. I sent back original order and the replacement had the same issue. So instead of sending back I grinded the inside of light connection to allow the connection to seat completely and work properly. It's a flaw in the qc dept design in this product. Other than that it's wonderful after this small adjustment ... show more
Reviewed in the United States on November 3, 2023 by Robert Gutierrez
    • Super easy learn and use.
Size: Wash and Cure 3.0
Makes the cleaning and curing process 90% faster and less messy. Found the USB light to be hard to get in but once it clicked it was snug.
Reviewed in the United States on November 10, 2023 by Tanner

Can't find a product?

Find it on Amazon first, then paste the link below.