Yak Power 10 Inch Red and Green LED Light Kit, 2-Piece for Kayak | Two-piece red and green navigation LED light kit for kayak boat marine, plug-and-play install

Description

Power Panel Switching System is 12-volt plug-and-play connectivity for your kayak. As adventure-loving, live for the water kind of people, we created the Yak-Power system so you spend less time cutting and splicing and more time on the water. Grab whatever electronics you want and easily connect them to our plug-and-play system. You can connect your fish finder, bait well, LED lighting, phone charger and any other 12-volt accessory you need. It comes with an integrated Power Port outlet, which makes it easy to plug in and power your 12-volt accessories. Master power switch. Add and control 12-volt electronics with five switched outlets, connect your fish finder, bait well, LED lighting, and phone charger. Using our patent pending Through Hull 12v connectors and Yak-Power plug-and-play wiring, adding LED lights to your kayak is super easy. Plug-and-play SAE connector for direct connection to the POWER PANEL switching system, Battery Box, or Battery Terminal Pigtails. Visit the Store Why cut and splice when you can just plug-and-play? Yak-Power has completely revolutionized LED lighting for kayaks. Using our patent pending Through Hull 12v connectors and Yak-Power plug-and-play wiring, adding LED lights to your kayak has never been easier. Simply drill a hole, screw in the Through Hull connector, plug them in, and power them up! No wires to cut, no splicing, no caulking, and most importantly no LEAKS! All Yak-Power LED lights are designed for maximum performance, ease of installation, and reliability. Our LED light strips feature Super Bright LEDS that are fully encapsulated, and compression molded with a silicone encased connector plug that plugs directly into our patented Through Hull connector. All wiring is complete with Yak-Power plug-and-play SAE connectors for easy integration into any Yak-Power system. GREEN is the best and most popular choice for attracting bait fish. BLUE is better for night vision and is commonly used for interior lighting and exterior lighting when attracting bait is not a priority. Simply drill a hole, screw in the Through Hull connector, plug in the lights, and power them up! No wires to cut, no splicing, no caulking, and most importantly no LEAKS! Note: Be SURE that the plug cap on the LED Light snaps completely over the edges of the stainless steel fitting! Each LED light strip comes with a 12ft fully insulated wire that is pre-terminated with a plug-and-play connector and y-splitter that plugs directly into the Power Panel switcher for complete control. No cutting or splicing. Just plug them in and start fishing! Note: To prevent the LED Lights from shorting out and blowing your fuse, be SURE that the plug cap on the LED Light snaps completely over the edges of the stainless steel fitting! If the lights are not fully inserted with the plug cap fully snapped over the fitting edges the lights will short out and blow fuses. This can be easily remedied by slightly backing out the fitting so the LED plug cap can completely snap into place. Make sure the plug-and-play connectors are completely pushed together when connecting the system together. Yak-Power uses our own custom tooled, high tolerance, very snug fitting connectors with larger gauge, real copper wire to ensure a quality, weatherproof and reliable connection. Using other aftermarket connectors or splicing other connectors into the YP system may cause damage to the system or the accessories connected to the system Always make sure the polarity of the main power wire to the relay pack is correctly plugged into its mating battery power wire. The positive male (red wire) side of the relay pack connector should plug into the female (red wire) side of the battery connector and the female (black wire) side of the relay pack connector should plug into the male (black wire) side of the battery connector. This will insure that the relay pack is properly wired to power so that it can communicate with the keypad. If power is not properly connected to the relay pack or if the polarity of the battery connector is wrong, the relay pack will not be powered up and will not be able to communicate with the keypad. This will result in the keypad not fully turning on and the keypad numbers not illuminating. If you are having issues with your wireless switcher turning on, please check the polarity of the main power connector to the relay pack to insure that the battery connector into which you are plugging has the female side on the positive (red) wire and the male side pin connector on the negative (black) wire. Also, please make certain that BOTH clear battery insulator tabs have been removed from the keypad battery compartment on applicable models (YP-RP5WR, YP-RP5W-OR)

Color: Red-Green

Shape: Rectangular

Material: Plastic

Finish Type: Silicone

Light Source Type: LED

Light Source Type: LED

Power Source: DC adapter

Voltage: 12 Volts

Mounting Type: Rack Mount

Light Source Special Features: Super Bright LEDs, IP68 Rating – Fully submersible, UV-resistant, 60 LEDs per meter, patent-pending, stainless steel, self-sealing, waterproof through hull connectors

Number of Light Sources: 2

Batteries are Included: No

Wattage: 3.6 watts

Color: Red-Green

Shape: Rectangular

Finish Types: Silicone

Style Name: Modern

Material Type: Plastic

Shade Material: Silicone

Brand Name: Yak-Power

Model Number: YP-LEDK-RG210

Set Name: 2-Piece

Manufacturer: Yak-Power

UPC: 607520050166

Manufacturer Warranty Description: 1 year manufacture.

Manufacturer Part Number: YP-LEDK-RG210

Unit Count: 2.0 Count