VIVOHOME 1.5 Gallon Vacuum Chamber with Pump, Stainless Steel Vacuum Degassing Chamber Kit with 3.5 CFM 1/4 HP Single Stage Vacuum Pump and Oil
Condition: New
Buy Now, Pay Later
As low as
$16.00
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
Returnable until Jan 31, 2025
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
20 left in stock
Arrives
Saturday, Aug 16
Recently Viewed
Size: 1.5 Gallon
Style: with pump
Features
- HIGH-QUALITY AND DURABLE CHAMBER - The chamber is made of premium stainless steel and has a chromium oxide finish; It has a long service life and is resistant to chemical damage; The durable 0.69-inch-thick transparent acrylic lid allows you to observe the process and adjust the speed according to your needs
- HEAVY-DUTY VACUUM PUMP - Made of die-cast aluminum housing and a composite anti-slip rubber base, it is lightweight and durable; The 3.5 CFM single-stage vacuum pump has a copper motor and is highly efficient; It can vacuum at 29.9 INHG under sea level and can vacuum on a high setting over 24 hours
- COMFORTABLE AND PORTABLE - The ergonomic handle is both comfortable and portable; It's equipped with a built-in high volume cooling fan for extended use; Silence valve can effectively reduce the motor vibration sound
- SAFE AND CONVENIENT OPERATION - The vacuum pump features a simple oil fill portyou can cleanly pour oil into this carefully designed port; The oil window provides you with vital information such as oil level and oil quality; The bottom oil drain valve drains faster and more thoroughly; In addition, the design can prevent oil from flowing back to the pipe or container, making it safer to use; The package Includes 1 bottle of 320ml vacuum oil
- SUITABLE FOR DIFFERENT NEEDS - The kit is used for defoaming silicone, epoxy, essential oil, polyurethane, etc.; It is commonly used for refrigeration maintenance, printing machinery maintenance, vacuum packaging, and medical equipment maintenance
Is Discontinued By Manufacturer : No
Product Dimensions : 8.6 x 8.6 x 6.7 inches; 19.3 Pounds
Item model number : VH933
Department : mens
Date First Available : August 23, 2021
Manufacturer : VIVOHOME
Best Sellers Rank: #11,706 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #2 in Lab Vacuum Chambers
#2 in Lab Vacuum Chambers:
Customer Reviews: 4.1 4.1 out of 5 stars 140 ratings
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Saturday, Aug 16
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Size: 1.5 Gallon
Style: with pump
Product--- VIVOHOME 1.5 Gallon Vacuum Chamber with Pump. This kit works great!!!! Assembly was quick and easy. 1 install the gauge assembly on to the clear top. 2 place the silicone ring around the top. 3 fill the vacuum pump with oil. 4 connect the hose from the gauge to the pump. This kit was up and working in maybe 10 minutes. Vacuumed the chamber down and had no problem holding vacuum for .5 hour. After initial test released vacuum and tested degassing liquid as seen in the photo. The little issues I noticed with the kit I received: 1. The gauge seems off and does not return to zero (when unboxing it the kit, the gauge was already at 5. This is not a problem for me as I don’t need accuracy for my task) probably should give zero stars for accuracy.......oh well.......... 2. The pump has a hard time starting when under full vacuum. It did start, but it took a second or so to get to full rpm. Easy fix with the pump side of valve closed release the vacuum in the line by opening the cap slightly at the pump. Than close cap and start pump and slowly open the valve for pump side of valve to increase vacuum in chamber. This is a budget friendly kit and work very well. I am very happy with this kit and it works perfectly for my tasks.
...
show more
Reviewed in the United States on May 14, 2024 by Amazon Customer Amazon Customer
Size: 1.5 Gallon
Style: with pump
I filled the oil as instructed, halfway between min and max. After running about 10 minutes I noticed oil splatters on the floor around the pump, significant oil on top of the outlet muffler, and even a slight haze in the room presumably from oil mist. To be fair, the vessel I was attached to was not airtight (only achieved about -11 psi) so there was more airflow than normal. Also, there is a very large range between max and min oil level, so I should probably run it closer to the "min" level and it will probably stop spitting oil. I've used other pumps before that seem to like the oil level on the low side. On the plus side, when using the stainless steel chamber that came with the pump (which has no leakage) the little pump sucked it down to nearly full vacuum within seconds, and I could turn the pump off and the vacuum would hold so there is no leakage. I did not even use the included hose clamps, just pushed the vacuum hose onto the barbed fittings. The pump runs quiet and smooth. Also nice is that the lid of the chamber is clear plexiglass, so you can keep an eye on what your degassing. The gauge, fittings and hose all seem pretty good quality. As others have mentioned, the instructions are strange and confusing. But everything is obvious, I recommend through the instructions away and just figure it out yourself. Its not hard.
...
show more
Reviewed in the United States on November 18, 2024 by Mister Sir 31459 Mister Sir 31459
Size: 1.5 Gallon
Style: with pump
Not sure why some of the bad reviews I saw on this item. I looked at several vacuum chambers for resin including this one and decided on this item. When I received it I read the instructions and used the included teflon tape on all the fittings that you screw in. I added the oil to the proper fill line and ran a test vacuum, and it worked great. I then mixed up some residual for a project and placed my form inside the vacuum pot and placed the lid on and pulled a vacuum. The vacuum held without any issues and did not lose any vacuum. I released the vacuum and pulled the vacuum again and this time let it sit overnight, when I checked in the morning the vacuum had not lost any of the vacuum from where I left it at, 29 bar. I am very impressed with this product and would buy it again. If you want to good vacuum chamber for resin or other projects don’t hesitate and buy this vacuum chamber. I was hesitant because of the few bad reviews, but this vacuum chamber does the job and does it well.
...
show more
Reviewed in the United States on October 17, 2022 by Alex Garza
Size: 5 Gallon
Style: with pump
Outstanding value! Working well.
Reviewed in the United States on September 18, 2024 by Will A. Lees
Size: 3 Gallon
Style: without pump
I used the 4 times and then it developed a leak around the guage. I could not find the leak and could not find replacement parts. When I closed the valve between the pump and the camber I got vacuum. So the hose connections were good. I tried tightening the nut holding the guage and the silicon gasket deformed. I tried other gaskets and then tried jb weld around the base of the guage - nothing worked. I will not buy another one from this vendor.
...
show more
Reviewed in the United States on June 26, 2024 by James C. Ball
Size: 5 Gallon
Style: without pump
I was pleasantly surprised when I opened the box and assembled the unit. Every part of this unit was very high quality. The top was very think glass, the pressure gauge was glycerin filled and the pot high quality stainless steel. I vacuum tested this unit and it held very well!!
Reviewed in the United States on July 22, 2024 by steven j lullo
Size: 1.5 Gallon
Style: with pump
You need to assemble the unit cover before you can use it. The instructions assumes that the you get a different set of parts. The supplied "tools" you get to put it together are 1) a toy screwdriver 2) a stamped wrench that is too big for any of the fittings. The valves and gauge are pre-assembled, but in my case, it was assembled hand tight, so you need to take it apart and put it together correctly using the Teflon tape (supplied). Then remove the protective cover off of both sides of the clear cover. Then use 1 steel washer and 1 silicone washer on the part that goes through the cover, then put the second silicone washer and the other steel washer on it, and use the brass nut to cinch everything snugly. You will need something other than the supplied "wrench" to do this because the wrench is too big. Then take the large gasket and fit it over the edge of the cover. Attach the hose to the barbed connector on the valve using one of the hose clamps and a real Philips screwdriver. Attach the smaller air release filter to the other valve. Screw the remaining barbed fitting to the pump using Teflon tape, and attach the hose to this with the other hose clamp. Follow the instructions for filling the pump with the supplied oil. Hopefully it all works for you.
...
show more
Reviewed in the United States on December 7, 2024 by dablakh0l
Size: 5 Gallon
Style: with pump
I have used the chamber a few time for epoxy and it works and it's good. The thing I have an issue with is that the seal around the lid doesn't seal. In order to get it to work I have to push down on the lid the get the seal to work where the vacuum holds is closed. I was able to slide a piece of paper between the lid and gasket. I am going to try and make my own gasket so I don't have to make it seal myself.
...
show more
Reviewed in the United States on August 18, 2024 by Brian c.