Search  for anything...
Mophorn

Mophorn Al-310S Power Feed X-Axis 450 in-lb Torque,Power Feed Milling Machine 0-200PRM, Power Table Feed Mill 110V,for Bridgeport and Similar Knee Type Milling Machines

    • Based on 189 reviews
Condition: New
Checking for product changes
$159.99 Why this price?

Buy Now, Pay Later

As low as $26.67 / mo
  • – 6-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

This item is eligible for return within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Mophorn
Arrives May 23 – May 24
Order within 9 hours and 20 minutes
Available payment plans shown during checkout

Recently Viewed

Size: 450 in-lb


Features

  • Model: Al-310S; Type: X traverse; Voltage: 110V, 50/60Hz
  • Rotate speed: 0-200 RPM; Max torque: 450 in-lb; Max feed rate: 650mm/min; Max return speed: 850mm/min
  • Small volume and easy installation power feed, jog function operates at any feed speed; Excellent speed control in the entire range
  • Noiseless direction changes, better surface smoothness and power table feed won't vibrate or strain in low speed
  • Safety feature to protect transmission gear and electronic components, as to meet the requirements of ergonomics.The two gears of this power table feed will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time.

Brand: Mophorn


Material: Alloy Steel


Power Source: Manual


Voltage: 110 Volts


Maximum Rotational Speed: 200 RPM


Brand: ‎Mophorn


Material: ‎Alloy Steel


Power Source: ‎Manual


Voltage: ‎110 Volts


Maximum Rotational Speed: ‎200 RPM


Base Type: ‎Fixed


Manufacturer: ‎Mophorn


Part Number: ‎Power Feed


Item Weight: ‎13.35 pounds


Package Dimensions: ‎15.39 x 13.35 x 7.36 inches


Item model number: ‎Power Feed for Milling Machine


Is Discontinued By Manufacturer: ‎No


Size: ‎450 in-lb


Color: ‎450 In-lb X-axis Torque


Item Package Quantity: ‎1


Included Components: ‎Power Feed for Milling Machine


Batteries Included?: ‎No


Batteries Required?: ‎No


Date First Available: December 17, 2016


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: May 23 – May 24

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • power feed
Size: 150 in-lb
only seem to last a couple 3 years but for the price it is still a decent deal.
Reviewed in the United States on October 19, 2023 by Brad
    • Fits Sharp mill
Size: 150 in-lb
I put this on a Sharp mill. It took about an hour to install. Making sure to clean everything that came off the mill and grease it all well. I followed the instructions on shimming the motor and it has been working well for the last few months now. The brass gear collar needs to be trimmed down about 0.25-0.375" in length to fit the Sharp mill. With the length it comes you get maybe half a nuts worth of engagement on the handle retaining nut. Can either turn it down on a lath or cut it down on the mill you're putting this on. I have also noticed at lower speeds, sometimes the motor doesn't want to engage when switching to power feed. You have to give the speed dial a small jerk and that will get the motor going. But once it is going it has had no problems feeding at whatever speeds I set it to. For the price I paid, even with the quirks, I don't know why I didn't buy one sooner. EDIT: I went back and looked at the brass piece. If you were to trim it down the ball end of the handle would interfere with the motor housing. So the handle itself would also need to be trimmed on one side as well. I have been running it as is for a while and it has been fine. Eventually I'll get to trimming it down. ... show more
Reviewed in the United States on September 20, 2021 by Taco
    • made very well
Size: 450 in-lb
shipped without street adress, came ups found package at post office a week later!
Reviewed in the United States on September 17, 2023 by Charlie
    • Starting point
Size: 450 in-lb
Review Image by User32 User32
Review Image by User32 User32
Review Image by User32 User32
Review Image by User32 User32
Review Image by User32 User32
Review Image by User32 User32
My vertical mill is not a supported model, but I was able to adapt this 450oz/in unit to a LHS drive using a steel plate, few sprockets and a length of chain. the handle has different detents behind it, and it can be converted to a horizontal mount pretty easy. drive shaft was 8mm, so a type 25 chain fit with some relief around what used to be the bevel gear. (B09QSQZY47) Overall, once it got it in, it works as it should, easy to set speed and change direction with the left hand and add oil with the right. The steel support plate doubles as a spot to stick down a large magnetic tray with collets and mill bits. also, my light clips on in just the right spot. ... show more
Reviewed in the United States on April 2, 2023 by User32 User32
    • Fits well on my old machine.
Size: 150 in-lb
I used it for the first time this morning. The biggest problem is the feed speed reset itself to a much higher speed than I set it for. This happened every time I went from left travel to off. For this job I just set the rheostat to off and then reset the speed on each pass. This will need to be resolved since it adds an undesirable additional step into the process. As far as working as a power feed it did well. Speed was stable even at low settings and power to move the work into the cutter was as expected. ... show more
Reviewed in the United States on May 15, 2023 by James Payne
    • Had to do a lot of machining
Size: 150 in-lb
I have a Millrite MVN Milling Machine, and this power feed required a lot of machining to get to work. First when I opened the box, which was in good condition, my power feed had cosmetic damage in the form of scratches on the outside. I tested to make sure it still worked, and my mill isn't exactly new either so I decided to keep going. I couldn't use the mounting bracket this came with due to the casting of the bed ( there is this little circular lip that the dial sits in, so it is not flat). I had to machine a disk to fit in that lip and secure it to the bed. Also the drive gear fits a 5/8 shaft, but the inner diameter of the bearing in the motor assembly is much wider in diameter than 5/8, so I had to machine a bushing for the shaft so the motor assembly could sit true with the shaft. In addition the keyway for the bronze drive gear was smaller and narrower than my mill's lead screw, so I had to use a keyway cutter to widen the keyway so I could actually key it into the shaft. Lastly, in order to attach the manual handle back I needed to machine a 5/8 shaft extension to fit into the bronze drive gear and out so the handle could be reattached at the end of the whole assembly (my lead screw was too short). Some of these things were my own fault for not looking closely before, and some of them was the lack of information from the company, instructions, and listing. It works fine for what'd you expect for a cheaper power feed, but I can't say my experience was particularly pleasant or easy. ... show more
Reviewed in the United States on December 29, 2020 by Matt
    • Not bad for the price
Size: 450 in-lb
Review Image by Amazon Customer Amazon Customer
Like others have said, the directions are very vague. The keyway is cut too small, some modification needed. I put mine on a old Bridgeport. The variable speed does oscillate at very low speed, works good enough for me.
Reviewed in the United States on February 25, 2023 by Amazon Customer Amazon Customer
    • Great Price!!
Size: 450 in-lb
I loved the price, had to modify the handle in order for it to work on a Chevalier. BUT AGAIN THE PRICE CAN'T BE BEAT!!!
Reviewed in the United States on July 12, 2023 by CFV

Can't find a product?

Find it on Amazon first, then paste the link below.