14 Inch Black Universal Slim Fan Push Pull Electric Radiator 12V High Performance Cooling Fan Mount Kit Set of 2

Features

• High-Performance14Inch 12V 2 Pcs radiator engine cooling fan with mount brackets and tie straps kit. Maximum Fan CFM: 1800 cfm; Maximum Fan RPM: 230010% rpm; Amp Draw: 8 amps; Motor: 80 watt; Number of Blades: 8 blades; Thickness (in): 2.5 inch.
• Excellent DesignSlim design provides excellent engine bay clearance. Good heat resistance and corrosion resistance ensure a long service life for the electronic radiator.
• Flexible Push and PullElectric radiator cooling fan is reversible, it can be used as a puller. Flip the blade over and reverse the wire to become an air pusher.
• Wide UseUniversal radiator cooling fan fit various vehicles and engines. It depends on the size of your radiator. Auxiliary equipment for cooling the entire engine compartment, including radiators, A/C systems, intercoolers, oil systems, and transmissions.
• Perfect ServicePlease check your car information before purchase. If you have any questions while using it, please feel free to contact us. We will provide you with satisfactory service.

Description

A radiator cooling fan is device that can help regulate engine temperature by pulling air through a radiator. The fan consists curved blade type and the motor is reversible perfect for turbo applications. The ultra slim design made it a lot more easier to be installed easily against your radiator. FGJQEFG 14 Inch Black Universal Slim Fan Push Pull Electric Radiator 12V High Performance Cooling Fan Mount Kit Set of 2 Wide Use: Universal radiator cooling fan fit various vehicles and engines. It depends on the size of your radiator. Auxiliary equipment for cooling the entire engine compartment, including radiators, A/C systems, intercoolers, oil systems, and transmissions. High-Performance: 14Inch 12V 2 Pcs radiator engine cooling fan with mount brackets and tie straps kit. Maximum Fan CFM: 1800 cfm; Maximum Fan RPM: 2300±10% rpm; Amp Draw: 8 amps; Motor: 80 watt; Number of Blades: 8 blades; Thickness (in): 2.5 inch. Fitment: It's a universal fit cooling fan. Make sure the fan size is correct with your original. Step 1: Open the hood of the car and remove the intake pipe above the cooling fan, so that the cooling fan can be removed smoothly. Step 2: The cooling fan and the air conditioning fan are located above the fan frame, with a total of four corners, one screw at each corner. Use a professional tool to unscrew the four screws. When the screws are all unscrewed, we can remove the cooling fan from the car. Step 3: Install the new cooling fan correctly on the new fan frame, and tighten and secure the four screws at the four corners. Step 4: Start the engine test and the fan can run normally. After checking the error, install the intake pipe to the correct position. Step 5: Tighten the fixing screws of the intake pipe, close the hood, and test to ensure that the new radiator fan is working properly and all operations are completed. (For non-professionals, professional installation is strongly recommended.) Pusher Fans Pusher Fans mount on the grille side(front) of the radiator core and push air through the radiator core. Fresh airflow enters through the grille, then is pushed through the radiator core, and exits out the back side of the radiator. Pusher fans are used typically where there is a limited amount of space for a properly sized puller fan. Puller Fans Puller fans mount on the engine side(back) of the radiator core and pull air through the radiator core. The fresh airflow is pulled through the grille, then pulled through the core, and exits out of the back side of the radiator. Puller fans are the desired and most common way of mounting a fan when space is not a limitation between the front of the engine and the back of the radiator core. Slim design provides excellent engine bay clearance. Good heat resistance and corrosion resistance ensure a long service life for the electronic radiator. Electric radiator cooling fan is reversible, it can be used as a puller. Flip the blade over and reverse the wire to become an air pusher. Please check your car information before purchase. If you have any questions while using it, please feel free. We will provide you with satisfactory service.

Brand: FGJQEFG

Power Connector Type: 3-Pin

Voltage: 12 volts

Wattage: 768 watts

Cooling Method: Air

Compatible Devices: Radiator

Noise Level: 50 db

Material: Plastic

Maximum Rotational Speed: 2300 rpm

Air Flow Capacity: 1800 cfm

Power Connector Type: 3-Pin

Voltage: 12 volts

Wattage: 768 watts

Cooling Method: Air

Compatible Devices: Radiator

Noise Level: 50 db

Maximum Rotational Speed: 2300 rpm

Air Flow Capacity: 1800 cfm

Material Type: Plastic

Brand Name: FGJQEFG

Warranty Description: 1

Manufacturer: FGJQEFG

Number of Items: 2

Unit Count: 2 Count

Model: WJ1236

Part Number: WJ1236