Eastwood 3:1 Jaded Green Metallic Single Stage Automotive Spray Paint 1 Sprayable Gallon Kit

Features

• Multi-Colored Pearl Particles that Dance in the Sun in this Dark Forest Green - Flake/Pearl Particle Size 10-65 Microns
• Catalyzed 2-Component Urethane Automotive Spray Paint for Unsurpassed Durability
• Highly Resistant to Ultra-Violet Rays, Chemicals and Paint Chips
• Makes 1 Sprayable Gallon When Mixed 3:1 with Activator
• Approximate Coverage is 125 Square Feet - Made in the USA

Description

Eastwood Jaded Green has Multi-colored pearl particles that dance in the sun in this dark forest green made exclusively for Eastwood. Styled by Kevin Tetz for his project Jaded Mustang. This paint has a Flake/Pearl Particle size of 10-65 microns. This premium 2-component topcoat system is blended with top- quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow.SpecificationsSINGLE-STAGE PAINT MIXING RATIOSThoroughly mix three parts single-stage urethane paint with one part Activator. No additional reduction is required but can be used as needed. Use caution in mixing materials as Eastwood’s single-stage urethane paint may begin to gel after approximately two hours (at 70 °F).PAINT GUN SET- UPHVLP Gun: Fluid Tip 1.3-1.5 mm Inlet Spray Pressure 25-30 psi Conventional Gravity: Fluid Tip 1.3-1.6 mm Inlet Spray Pressure 45-50 psi Conventional Siphon: Fluid Tip: 1.4-1.8 mm Inlet Spray Pressure 45-50 psiAPPLICATION INSTRUCTIONSApply single-stage urethane paints in two to three medium wet coats as necessary to achieve sufficient coverage, allowing ten minute flash between coats. Additional coats may be necessary to achieve total coverage for some metallic colors. A final “fog coat” may be applied with metallic colors to help set an even flake pattern and /or adjust flake orientation. A dry film thickness of approximately 2 mil is recommended. Paint should be dust free within 10-15 minutes and tack-free within one hour (at 70 °F). Re-coat anytime after the previous coat has flashed, or before 18 hours. After 18 hours, paint should be abraded prior to re-coating for proper adhesion purposes.This urethane paint may be applied as a stand-alone single-stage system, or in combination with Eastwood’s High Solids Urethane Clear as a basecoat/clearcoat system. Additionally, Urethane Clear may be integrated into Urethane color. When combining the two systems, be sure to activate each side (the paint and the clear) separately, with their own activators at the correct mix ratios, before blending.When used as a Single-Stage Urethane Paint, this coating may be wet-sanded and polished for increased depth and gloss like any other urethane topcoat. Care should be taken when lightly cutting metallic colors to prevent disturbing aluminum flake.

Brand: Eastwood

Color: Green

Finish Type: Gloss

Size: 128 Ounce (Pack of 1)

Item Volume: 128 Fluid Ounces

Unit Count: 128.0 Ounce

Paint Type: Spray

Specific Uses For Product: Interior/Exterior

Surface Recommendation: Metal

Item Form: Kit

Brand: ‎Eastwood

Color: ‎Green

Finish Type: ‎Gloss

Size: ‎128 Ounce (Pack of 1)

Item Volume: ‎128 Fluid Ounces

Unit Count: ‎128.0 Ounce

Paint Type: ‎Spray

Specific Uses For Product: ‎Interior/Exterior

Surface Recommendation: ‎Metal

Item Form: ‎Kit

Included Components: ‎(1) 96 Ounces Single Stage Paint (1) 32 Ounces Medium Speed Activator

Model Name: ‎Eastwood

Color Code: ‎Green

Coverage: ‎125 Square Feet

UPC: ‎607174173327

Manufacturer: ‎Eastwood

Part Number: ‎98346ZP

Item Weight: ‎11 pounds

Item model number: ‎98346ZP

Finish: ‎Gloss

Item Package Quantity: ‎2

Batteries Required?: ‎No

Date First Available: March 24, 2025