Dynofit F150 2inch Lift Kits, Front Chassis Leveling Kit for 2004+ Ford F-150 2WD 4WD, 2003-2018 Expedition, 2" Suspension Level Kit for Shock Absorbers, 2 Pcs Forged Strut Spacers
Condition: New
Buy Now, Pay Later
As low as
$8.33
/ mo
Learn more
- – 6-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Friday, May 22
Recently Viewed
Size: 2inch Front
Features
- Compatible Vehicles: For 2004-2026 F150 2WD 4WD, 2003-2018 Expedition, 2005-2008 Lincoln Mark LT(*Warning: DOES NOT fit 2021+ models equipped with CCD system)
- Thickness Note: 2 inch raise leveling kit. When you receive it, it's gonna be 1 inch of thickness but will lift 2 inch (lever principle)
- Premium Material: Forged aircraft billet aluminum T6 treated. 10.9 Grade premium bolts, excellent resistance to corrosion by black anodized surface. Good looking on your truck and provide enough ground balance
- Performance: Engineered to lift your truck for enhanced tire clearance and improved ground balance. Experience smoother off-road control with refined suspension geometry that absorbs rugged terrain impacts. Maintains aggressive styling without wheel rub
- Contents: 2-Piece front strut spacers with Pro Shock-Proof box
Brand: dynofit
Auto Part Position: Front
Material: Aluminum
Included Components: 2pcs Strut Spacers, lug nuts
Maximum Lifting Height: 2 Inches
Brand Name: dynofit
Included Components: 2pcs Strut Spacers, lug nuts
Manufacturer: fastfree
UPC: 788601132367 788537564133
Automotive Fit Type: Vehicle Specific Fit
Set Name: 2 Inch Leveling Kit (2-Piece)
Manufacturer Part Number: l008-20
Model Number: l008-20
Unit Count: 2 Count
Manufacturer Warranty Description: Manufacturer Warranty For 12 Months
Auto Part Position: Front
Material Type: Aluminum
Maximum Lifting Height: 2 Inches
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Friday, May 22
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
Purchased the front strut spacers for 1.5" of lift and installed on my 2018 F150 3.5EB Crew Cab 5.5' Box Lariat FX4 ~40,000 miles. Had a bad IWE actuator, so it was somewhat convenient to tackle both the spacer install and hub replacement at the same time, nearly all of the same suspension components need to come apart to do these jobs. The spacer kit is very nice. The spacers themselves are nicely machined aluminum and anodized black. They seem like they should hold up well. I discarded some of the hardware that came in the kit, sometimes the hardware that comes from overseas is poor quality. Did this just to be safe. I used the socket head screws but sourced my own stainless flat washers for them. Then for the 3 nuts that go back on the top of the strut tower on the frame of the truck, I re-used the factory nuts, they are nice large flange locknuts. I used my stainless washers and locally sourced nylock nuts to fasten the spacers to the strut assemblies. Tip #1 - due to the 3 bolt pattern on the spacer and strut plate, you need to rotate the strut plate 180 degrees on the strut assembly. I put the lower part of the strut in a vice and used a pry bar spanning 2 of the 3 studs on the strut plate to apply torque to the strut plate to spin it. I spun in the wrong direction and the spring started to climb out of its ramp pocket. Give a little WD40 spray around the lower spring retainer, and spin in the direction that it does not try to climb the ramp on the retainer. Tip #2 - on my install (1.5" of finished lift), the thickness of the spacer is a bit less than the length of the studs on the factory strut plate. If left untouched, the spacer may not properly sit in the strut tower in the frame. The strut plate studs protrude slightly above the top surface of the spacer. I ground down the strut plate studs and filed the edges of the threads, to avoid any issues. Tip #3 - my factory struts have pressed in lower bolts where the bottom of the shock mounts to the lower control arm. That makes the overall strut assembly "longer", meaning the lower control arm needs to be pried down further to fit the longer strut assembly back into the chassis. Since I was also doing the IWE hub replacement, 2 things made it a lot easier to pivot the control arm down lower. First, having the CV axle removed from the front hub, so you aren't fighting trying to "stretch" the CV axle as you pry down the lower control arm. Second, I removed 1 nut (on each side of the truck) from the stabilizer bar link, to disconnect the stabilizer bar from the lower control arm. This then allowed the lower control arm to be easily pried low enough to install the strut assembly. Overall very nice product, good install. On the 1.5" lift version, at full suspension droop, there is very little clearance, maybe even just a bit of light contact between the coil spring and the inside of the upper control arm. I do not off-road so it is very unlikely that my suspension goes to full droop. The truck needed a minor alignment after the install. No noticeable change in ride, after all, the same shocks and springs are carrying the same load. Headlights needed roughly 2 clicks of adjustment down to shine in the same spot on my garage door at 25 feet away. Most of the rake is now removed from my truck, instead of the front being ~2" lower, it is roughly 1/2" lower. No noticeable change in highway fuel economy (air flow over and under truck might have been altered and could potentially affect mileage).
...
show more
Reviewed in the United States on August 17, 2022 by SEAN N.
Size: 2.5inch Front
2018 F150 2.5” leveling puck and 2” rear block has the truck sitting level. This puck is seems solid. Install tip, only unbolt the tie rod, sway bar and lower control arm on the frame side to remove the coil. Makes the process pretty easy. Angles aren’t amazing but can’t expect much going this route. 2.5” is the max level height you should go! Also get it aligned afterwards Sorry for the crappy picture
...
show more
Reviewed in the United States on March 8, 2026 by Deke Fabling
Size: 2inch Rear
Very great product fit right in no problem. You get it within one hour
Reviewed in the United States on April 2, 2026 by Felix casas
Size: 2inch Front
Did what it was supposed to very happy with the out come… did raise my front a good couple of inches.. definitely worth the money
Reviewed in the United States on February 2, 2026 by Kevin Moreno
Size: 2inch Rear
Had to do some slight modifying but overall easy install, work good
Reviewed in the United States on February 17, 2026 by Ryan Winkelman
Size: 2inch Front
Muy bueno el producto Satisfecho
Reviewed in the United States on April 15, 2026 by Carlos Torres
Size: 2inch Front
Great quality made product to place on my 04 f150 lariat crew cab 2WD. I wanted to level the front with the rear for a more defined look. Company shipped out and arrived earlier than expected. Very easy to install on top of new Gabriel ultra ready struts. Thank goodness I had my friend mechanic help me install the struts bc the width of the spacer on top of the strut required some serious force with the assistance of a long extension bar to pry down on lower uca in order for the strut to fall in place and line up with the three mounting holes. By the way, if you need to replace upper control arms now is the time bc you will have to take struts back out in order to get the side mounting bolts out and you will run into the same issue but with another helper you can do it. Final results came out better than expected as it looks really good. The rear measures 471/8 and front measured 47. Could have probably went with the 2 1/2 level but glad I didn’t bc I like the level look. Would have completed myself but like I said earlier glad to had the help of my mechanic friend.
...
show more
Reviewed in the United States on February 21, 2020 by Amazon Customer
Size: 2inch Rear
These blocks are pretty solid and fit my '20 F150 perfectly. The U bolts were pretty long though so I took a grinder and cut off the remaining threads which was about 2.5 to 3 inches. Other than having to do that, installation was a breeze. Just put a 4x4 block on your floor jack and raise the body up under your leaf springs to get the blocks in and that's it. Throw the new U bolts on the existing axle plates, tighten and you're done!
...
show more
Reviewed in the United States on June 22, 2025 by Derek Zalme