CLONE-A-WILLY - Silicone Penis Casting Kit for DIY Dildo (Light Skin Tone)
Condition: New
Buy Now, Pay Later
As low as
$8
/ mo
Learn more
- – 4-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Apple Pay, and PayTomorrow. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Free shipping on this product
Non-returnable item
Learn more
Non-returnable due to Product safety reasons
View our full returns policy here.
Availability:
In Stock.
Arrives
Sunday, Jun 14
Recently Viewed
Features
- MIX - HOLD - POUR - REVEAL: This silicone mold making kit was developed to create a high-quality, realistic vibrating dong replica that you can make easily in the comfort of your own home.
- MADE WITH BODY-SAFE MATERIALS: The Clone-A-Willy silicone mold kit consists of casting mold powder made from high-grade alginate derived from seaweed with a medical-grade platinum cure silicone - the gold standard of sex toys.
- AN EXACT COPY OF YOUR FAVORITE MEMBER: Our medically tested molds capture incredibly life-like detail, making it the most personalized DIY dick casting kit on the planet!
- MAKE IT VIBRATE: Every clone kit comes with all necessary molding materials to mix and cast, but the fun continues with the included bullet vibrator to that this DIY creation to the next level.
- EASY TO USE: If you can mix, you can cast! This casting kit makes it easy to create a homemade version of your favorite member that's sure to bring endless pleasure!
Color: Light Skin Tone
Material: Rubber
Brand: Clone-A-Willy
Model Name: Clone-A-Willy Realistic Vibrator Silicone Moulding Kit
Style: Light Skin Tone
Is Discontinued By Manufacturer : Yes
Language : English
Product Dimensions : 11 x 3 x 3 inches; 15.87 ounces
Item model number : 8531
Department : Health & Personal Care
Batteries : 1 AA batteries required.
Date First Available : March 27, 2007
Manufacturer : Clone-A-Willy
Best Sellers Rank: #36 in Realistic Dildos
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sunday, Jun 14
This item is non-returnable:
Non-returnable due to Product safety reasons
View our full returns policy here.
Non-returnable due to Product safety reasons
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
Top Amazon Reviews
The moment I saw this item, I knew I had to jump at the chance! When it came in the mail, I was ready to surprise my wife with a new toy...or so I thought. I read previous reviews to make sure I wasn't wasting my money. Call it arrogance, but I do work in customer service and consider myself smarter than the average joe. I thought for sure that those who wrote the bad reviews may have overlooked a detail or were simply in a hurry. Boy was I wrong; I poured over every single detail in the instructions, I read, re-read, practiced timing scenarios, EVERYTHING. It was all going well until I had to mix the molding powder with the water in a small bowl. You literally have a 60 second time window in which to combine 98° F water with the Molding powder. I was aware of this, so I prepared to spring into action. Right when that powder hit the water it started clumping and hardening within 30 seconds. The mix as designed is supposed to be lumpy like pancake batter. So I'm stirring madly, trying to coerce the powder and water to mix to the right consistency. This is where it all started falling apart. Let me break it down for you. 0-09 seconds - molding powder hits the water 10-19 seconds- stirring powder mixing 20-29 seconds- mix begins to clump in certain areas 30-39 seconds- stirring intensifies to even out mix (this is not working) 40-49 seconds- I realize the mix is not only clumping but starting to harden (activate panic mode) 50-59 seconds- I pour my half water half lump mix into a oil funnel (to prevent from huge mess) molding hardens in oil funnel (are you F***ing kidding me?!?) :60-1:19- QUICK PLAN B! Pour remainjng NON-hardened mix into tube. Mix in tube begins to solidify (F***!!!!) 1:20-1:30 - [Still in denial] I shove my *ahem* "Willy" into tubing (which was measured and precut mind you). No good, mix is already hardening. So basically I'm using my "Willy" as a stir stick on something that looks and feels like giant hardened cottage cheese curds. 1:30-1:40- pants-less in kitchen, taking in aftershock of what just happened. 1:40 - 2:00 - [silence; still in shock and disbelief] After - 10 minutes - finish cleaning up disaster area from previous event. So longer story shorter, I now in hindsight give more accreditation to the previous reviews. They are largely in part accurate. And believe me, I'll be asking for my money back.
...
show more
Reviewed in the United States on September 3, 2014 by Benjamin
the negative reviews had me scared. i think that fear drove me to success. my bf works night shift and sometimes when i’m in the mood, he is not. but i don’t just want a dildo, i want him. so i thought what better way to have him, than to just turn him into a dildo for when he isn’t up to it but i am. reading the reviews, i was scared that i would mess this up. i had tried the hand casting craft a while ago, and failed miserably because i mixed for too long, i thought this would be the same. i thought wrong. i read negative reviews and positive reviews and took into consideration where people failed, and where people succeeded. i bought extra molding powder in case i messed up the first try, and extra silicone incase what was included was not enough. i studied the directions hard and watched the how to vids. when it came to it, i mixed the molding mixture until it was just combined, but also not TOO clumpy, the directions said clumps are still ok. i didn’t even count, just mixed until i felt it was ok. so in a panic, i poured it into the tube as quickly as possible and handed it over to my bf. it took less than 2 minutes for the mold to harden and it turned out smooth and perfect. the extra silicone was supposed to come a day late, so i was just gonna let the mold sit overnight until it got here and then i’d fill it, but my bf was adamant that we just try what it came with, so i did. he is JUST under 7 inches and the silicone filled up ALMOST all, would’ve left an extra inch off. i had no plans of using the vibrator, BUT adding it filled in the rest of the mold that the silicone alone couldn't, so i inserted it anyways. now time to wait. hate that part. we finished the activity around 1:30 pm, and i got too excited and took it out of the mold at 6 am the next morning. it was fully hardened, but i’m still not messing with it until it hits that 24 hour mark. safe to say it turned out perfect. i absolutely love it. now i have extra molding powder and silicone though, so i may just save the tube and do another one. sorry for the long review, but all in all, just make sure to read instructions AND REVIEWS. mix till you feel is right, make sure water temp is perfect, HAVE HELP, and have fear about failing. you’ll be alright.
...
show more
Reviewed in the United States on May 19, 2026 by leah
made me realize how infinitely small my penis was, my self confidence was shattered and upon realizing this horrendous truth, my wife of 16 years left me. my kids wont talk to me, this product ruined my life. so there i was, coming home from a long trip in europe, and i wanted to spice up my marriage by trying to do something wild or adventurous. woe was i, when upon sliding my member into the lukewarm mold, did i slowly come to realize that by replicating myself, i eliminated the need for me to be around for my wife to be satisfied, but unfortunately when i realized this, it was too late. my penis was cemented into this plaster tube of regret. after immediately going limp and being able to slowly remove my flaccid shame. i contemplated throwing the mold away. but instead, driven by a half mad curious desire to see a 3D model of my once pride and joy, i dutifully mixed the rubber and filled the mold as carefully as i could muster. impatiently waiting for the mold to dry, i finally freed willy from his concrete tube. and cried. i had realized in that same moment that my penis was not the illustrious 8 inches my wife had continually reminded me ritualistically for the past 16 years. i measured it half nervous, expecting to be surprised pleasantly by my fearful early judgement, only to be cruelly reassured that my 3 inch member had much to be desired. i debated on whether or not i should present this embarrassing idol of mockery to my wife, but reluctantly did so as she walked in on me trying to flush it down the toilet. she stared at it for a few moments in silence, i could see the past 16 years of our marriage slowly flicker across her distant eyes. finally she drew in a short breath and looked me in the eyes and said the words every man dreads to hear after presenting such a vulnerable object of intimacy. "what do you want for dinner?" in disbelief i cried out, "is that all you ever think about!?" i pulled up my pants in an awkward moment and stormed out of the house. i havent been back since. Men, if you value the precious but delicate balance that is your marriage, never create irrefutable evidence that your penis is shorter than what you may have ever boasted about prior. btw this thing also creates air bubbles in the penis. so it looks like you might have had a herpes outbreak when you made the mold. not a good conv topic,
...
show more
Reviewed in the United States on February 14, 2016 by applemacguy
Seriously laughing at all the botched attempts. This is so easy to do!!! First*** go to Clone-a-Willy’s website (empire labs) and read and click every link. Just learn. Tips and advice: -the company recommends bottled water if you have a well or spring. Get 2 pots and 2-3 bottles of water. Simply heat 1 bottle of water on the stove, remove before boiling. Get a second pot pour half of the heated water into it and add half a bottle of water, stir, and then slowly adjust your water temp to exactly 90* with extra hot and room temp water. Add till you get it 90* and then measure the correct water amount out and begin your molding. -have a helper*** -the how to video is useless. When mixing the molding powder they show someone slowly mixing it. In reality you need to be moving your arm really fast like beating eggs to mix this. Put 90* water into the Mixing bowl, start your stopwatch when you pour the powder in and mix it like eggs. Ours was not clumpy at all at 32 seconds so this is doable by 45 for sure. It’s going to be a bit runnier than Elmer’s glue and look just like it. -we didn’t have petroleum so we used coconut oil. Worked perfect!! No need to shave entirely just trimmed low works with no pulled hairs. -it says hold into the mold until the 2 min mark but just hold into the mold for longer!! My hubs couldn’t get soft to get it out so we loosened gently the top by prying. It’s a flexible mold go slow and gentle to release suction and it will just flex as you slowly get out. -save your amazon box for this!! Cut it and flatten it to stand on when molding. Any spills land on the cardboard! -size your tube before doing this at all. Get hard mark the tube and see if you need to follow clone-a-Willy’s video instruction on a curved tube modification! So so so simple!! Just need duck-tape. -if you are super prepared your helper can make a clone-a-pussy while doing the clone-a-Willy with extra molding mix. Simply trim up/shave, coconut oil before doing any mixing, cut a medium sour cream container to about 1/2-3/4” deep. After pouring your mans mix into the tube, set the mixing bowl under him to catch extra mix that spills out. After assisting your man that he’s situated good and not touching the tube sides, with any extra scrape from bowl and quickly dump into your mini container. Just go for it! Slap and hold lmao!! If your quick like we were I was holding mine by 50sec-1min mark and it worked!!
...
show more
Reviewed in the United States on June 20, 2020 Reviewed in the United States on June 20, 2020 by Erica
Ok. So this requires a lot of preparation. I highly recommend 2 people.... possibly even a 3rd. We read all the reviews and watched lots of fail videos about it but still decided that we could conquer this. The first attempt was a complete and very messy fail. We had the water to the perfect temperature, ( Side note: I feel that some of the other reviewers may have been reading the included thermometer wrong. Make sure you are reading the fahrenheit side. ) the tube was cut and taped so as not to scratch him, we had everything set up so that we could go as fast as possible with timers set for every stage. So first of all from what I understand it is very hard to hold an erection while feeling under pressure from all these time sensitive steps. Finally with a little help from me and his favorite website he got to where he needed to be. I mixed the powder and water and stirred for 1 minute as described. It was very lumpy still when the timer went off but I went ahead and poured the mixture into the tube and proceeded to the next step which presented a logistical problem. The tube is full and he is standing... so I, being very aware of the time just tilted the tube and slapped it over his erection pushing it all the way to his body. In the process of this quite a bit of the molding material rained down onto the floor and all over his legs and feet. He tried really hard to maintain his concentration but the cold wet goo covering him did not help anything. We were still hopeful and waited the 4 minutes plus a little extra as a precaution. Removing the tube was not that fun for him either as he had not done any manscaping in preparation and it did stick a little bit. Once the tube was off we looked at what we had created. It was less than awe inspiring... There were clearly visible bubbles and not a very accurate impression had been made. While he cleaned up both himself and the floor in a 4 foot radius from where he had been standing I mixed the silicone material and poured it into the mold and then slid in and carefully positioned the included vibrator attached to a cardboard square as described. 24 hours later... We pulled the failure from the mold and were super disappointed that not only was it covered in lumps and pits but also the mold had warped a bit and it was shorter and thinner. Also the vibrator had touched the side of the mold and was visibly sticking out a little ways. No way would I ever be using that for anything. So... I am not easily deterred and came back on Amazon and ordered the Alginate powder that another reviewer suggested, a refill kit of the silicone material, some cock rings, and a natural performance enhancer. 3 nights later... I had him lay on the bed on top of towels. I cut both sides of the tube out so that it was open on both sides. He put on the cock ring and got himself to where he needed to be. I measured, poured and mixed everything ( by the way don't be afraid to use cold water with the alginate powder it will make it set slower ). I came back to him and placed the tube over him and poured the mixture into the tube and over his erection. Then kinda squeezed the tube a bit to make sure it covered everything. We waited 5 minutes and removed it. ( made significantly easier by him having done some manscaping ) and..... Perfect mold!!! No issues with mixing the silicone mixture. I do recommend that after you pour it into the mold you should come back about 1 hour later and pop all the bubbles that have formed at the top. 24 hours later and I now own a perfect replica of my mans "willy". It is awesome for those times when he isn't around. Also it was pretty fun even with the fails we were laughing quite a bit during the whole process.
...
show more
Reviewed in the United States on December 23, 2015 by And on with us
What if you buy something to be sexy and fun but you are also perfectionists? That was us. It seemed straightforward, buy this kit, browse the instructions, get at "full attention", make a twin. Let me say that there is no problem with the product. Just be aware that if you want to have a good result, it's work. Also, if you make a mistake, you'll likely have to start over. The biggest problem is that when you are casting your manhood, you have to keep it off of the sides of the tube. If it rests against the tube you'll end up with a smooth wall on the clone. It doesn't look natural at all. So, must be at full attention and stay that way, being careful not to rest against any side of the tube. I'm not even that big but how do you stay off the sides of the tube? The casting was difficult even with two of us working. I think you need a production team. (That would be hot if my wife let me pick the team members) Our first clone was no good. We ended up buying a refill and starting over. The 2nd one is great. That one wasn't fun at all but it's accurate and detailed, so, mission accomplished.
...
show more
Reviewed in the United States on May 27, 2026 by Amazon customer
I was super excited when I got this kit, as I'm currently in a long-distance relationship. However, I was concerned that the amount of rubber material for the dildo wasn't going to be enough. I decided to wing it, since even if I didn't have enough to make the full dildo I could at least save the cast to try again later. When the time came to finally cast my guy, we cut the tube to the length of his member (8.5 inches) then mixed the casting agent exactly as instructed and poured it into the tube. I noticed the material only came a little more than halfway up the tube. I figured maybe it would fill out the rest of the tube when we stuck his member in it. Once we did, however, it still ended up only covering about 3/4 of his penis, so I tried turning the tube sideways and rotating it as per the instructions. All this did was cause a small amount of material to leak. So we ended up sitting in vain with half his penis covered and the other half floating above the material, which failed to come anywhere close to solidifying after 2 minutes. In the end I wasted my money and made a bit of a mess on the carpet. This kit really needs double the casting agent, and the casting agent needs to WORK. Very disappointed, I was looking forward to using it and giving him personalized shows on Skype. The lack of material is especially frustrating since all of the pictures and diagrams seem to show pretty sizable members. Oh well, next time we might try the "Clone Your Partner" kit instead.
...
show more
Reviewed in the United States on November 3, 2011 by E. Parillo
Got this as a fun little activity to do with my husband and it ended up being a huge disappointment. We set everything up exactly as the instructions said. I made sure the water temp was perfect, he pre cut the tube to the correct length. We were pretty much ready to go. I poured the water into the bowl per instructions, and then the powder in after that and immediately began stirring. Let’s also note that the entire time I’m stirring my husband must be “ready” to do his part in order to make this thing so he’s working on that lol. Almost immediately I noticed it was kind of chunky and not becoming smooth. I kept stirring for 45 seconds and then immediately began the next step of pouring into the tube. It became solid almost immediately. I wasn’t even able to get all of it into the tube as you can see a huge chunk fell out of the bowl and onto my counter top. It was almost immediately too hard for him to put himself inside the tube…and that was it. As far as I can see, we did not do anything wrong. I still dont understand why it didn’t work when for some people it worked perfectly. Luckily when I contacted Amazon they gave me my money back because this thing was basically a huge waste of money. Apparently it works for some people, so I guess if you would like to take the risk, try it out, but we won’t be attempting this again.
...
show more
Reviewed in the United States on February 23, 2026 Reviewed in the United States on February 23, 2026 by Angie