YITAMOTOR LED Light Bar 52 inches Light Bar Compatible with 1997-2006 Wrangler TJ with Mounting Brackets and Switch on/Off Wiring Harness 300W Spot Flood Combo Off Road Lights 12V
Condition: New
Checking for product changes
Buy Now, Pay Later
As low as
$16.67
/ mo
Learn more
- – 6-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Wednesday, Jun 4
Size: 52 Inch
Style: For Wrangler TJ+Straight
Features
- LIGHT UP YOUR ROAD: Features a Durable diecast aluminum body with jaw-dropping dual-row 27,000 Lumens pure white light, YITAMOTOR 52" 300W Offroad LED Light Bar is an ideal choice for different off-road use and will light up everything in front of you.
- SOLID CONSTRUCTION: The YITAMOTOR 300W 52inch light bar comes with the wiring harness and mounting pillar. With more than 50,000 hours of lifespan of the 52 inch light bar , it is MORE DURABLE than the competitors version. While the IP67 rating make it incredibly resistant to water and dust.
- COMBO LED BAR: The combination of two 60-degree flood beam and one 30-degree spot beam of the 52 inch led light bar makes it lighter and wider to give you an incredibly clear visibility in any terrains, which helps avoid potential hazards on the road ahead.
- UNIVERSAL FIT: These off road led lights set can be compatible for almost all 4x4, Trucks, Cars, Motorcycles, SUVs, ATVs, Boats, Family Vans. Besides that, they also works great as driving light, fog light, or for emergence use.
- Money Back Guarantee: Making you a happy customer is our guideline. Your satisfaction is backed by our Risk-free 30 Day Money Back Guarantee, and Lifetime Warranty against any defects. Give it a shot, you will never go wrong with the YITAMOTOR LED LIGHT BAR.(NOTE: Professional installation would be highly recommended)
Item dimensions L x W x H: 52 x 5 x 7 inches
Brand: YITAMOTOR
Color: Black
Form Factor: Bar
Recommended Uses For Product: Off-road lighting, Work lighting, Household lighting, Boat lighting
Auto Part Position: Top
Included Components: 1
Special Feature: Waterproof
Material: Aluminum
Water Resistance Level: Waterproof
Item dimensions L x W x H: 52 x 5 x 7 inches
Brand: YITAMOTOR
Color: Black
Form Factor: Bar
Recommended Uses For Product: Off-road lighting, Work lighting, Household lighting, Boat lighting
Auto Part Position: Top
Included Components: 1
Special Feature: Waterproof
Material: Aluminum
Water Resistance Level: Waterproof
Remote Control Included?: No
Number of Pieces: 1
Manufacturer: YITAMOTOR
UPC: 810051281729 840265240908
Model: LED Light Bar
Item Weight: 12.97 pounds
Product Dimensions: 52 x 5 x 7 inches
Country of Origin: China
Item model number: G6H8J0K2L4M6N8P17
Is Discontinued By Manufacturer: No
Exterior: Machined
Manufacturer Part Number: G6H8J0K2L4M6N8P17
Special Features: Waterproof
Wattage: 300.00
Date First Available: January 28, 2016
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Wednesday, Jun 4
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Similar Products
![True Mods 2pc 7" Ultra-Slim Single Row Off Road LED Light Bar [1530lm] [18W] [IP68 Waterproof] [12V - 24V] Fog/Driving/Work Lights for Trucks ATV Cars - 30 Degrees Spot Light](https://m.media-amazon.com/images/I/81Sbq2cKTdL._AC_US500_.jpg)
Top Amazon Reviews
Size: 52 Inch
Style: For 07-18 Wrangler JK+Straight
Great budget setup for a first time, or basic off-road lighting system. $$$Cost effective$$$ Easy Install. Durable construction and decent quality electrical components. Happy with the quality minus a slight hole clearance issue that has been mentioned by other customers previously… But can be easily resolved. I recommend a step bit or unibit with a drill, or a die grinder with a carbide bit or dremel tool to open up some of the holes to get better fitment of the brackets to the vehicle. Padding material is ok and i recommend using it between the brackets and your vehicle 👍 ************PURCHASE A WINDSCREEN********** Lightbar does create a good bit of wind noise as expected, doesn’t bother me, I’m used to trucks with ladder racks etc. but wife and daughters hate it 🙄 so get yourself a windscreen and everyone is happy 😃 Lightbar has plenty of bright, focused useable light pretty far out, and spotlights do a good job to illuminate each side where the lightbar doesn’t shine. Does the lighting job just fine for me. Definitely a solid improvement Along with replacing the stock halogen Headlamps and Fog lights with LED Bulbs, it It works great on trails, backroads, off road, and I have personally used it for illuminating job sites, and other various projects. Switch and relay assembly is nice and has a quick connection between the switch and the assembly which makes the interior install easier 👍 I wired my setup a little differently and I recommend running a separate switch for the spots and lightbar. This is so you can control them independently of each other. I recommend getting a switch pod, or panel with multiple switches to route and manage all of your lights and other accessories. Satisfied customer 👍 Product was exactly what I paid for and would definitely recommend, and buy other Yitamotor Products in the future.
...
show more
Reviewed in the United States on January 8, 2024 by Mikewhittthewelder Mikewhittthewelder
Size: 52 Inch
Style: For 07-18 Wrangler JK+Straight
For the price, it can't be beat. The installation was relatively easy, especially if you have some electrical knowledge and installation experience. The wiring harness only has one lead for the main light bar and no wiring for the two spots. I got 10 gauge red and black lead wires and crimp on connectors to tap into the main lead and everything works great. The lights are really bright though it's hard to discern the spot from the wide angle as the whole area is lit up like a side of the road construction work light. The main wiring harness switch was really easy to install through the firewall thanks to the factory entry point on the Jeep Wrangler. I wired up under the dash and onto the base of the center console so the glaring red LED light doesn't bother me when I drive. The whistling, which I've read on line is common, is due to the vibration of the cooling fins. I wouldn't recommend the on line solutions as they usually involve putting something on or between the fins which will ultimately affect the cooling. From 55 to about 64 MPH, the whistling stops so you kinda have to get to a certain sweet spot to avoid it. So, if you're going for looks only, then installl the anti-whistling solutions you see on line. But if you want to use the light frequently, deal with the noise and let the cooling fins do its job. Overall, an exceptional value for a fair piece of auxiliary lighting. Delivery was quick and the installation, at least for me, took under an hour since I wired up everything first. The best recommendation I can give is that I'm splitting the cost of another set with my mother-in-law for my father-in-law's Christmas present...which I'm going to install, natch...
...
show more
Reviewed in the United States on November 22, 2016 by Beach n Jeep
Size: 52 Inch
Style: For 07-18 Wrangler JK+Straight
Item came well packaged and defect free when unwrapped. As others have stated, the holes for mounts at first seem to not line up well with existing bolt holes, but if you put outside 3 bolts in first and leave them loose, the front two bolts will line up if you push in towards center of vehicle on the mount. When bolts are tightened up, you will see mount shift its shape very slightly - it appears that they just have the bends in the mount bent slightly tighter of an angle than necessary, causing this appearance of holes not lining up initially. Leave the mount on one side (whichever side you will be running the wire harness on) loose, as you will need to pull it back off after you have the light bar wired to harness, so you can route harness down underneath the mount - there is a gap just the right size underneath the center of mount bar between mount and the A-pillar for harness to fit, but you have to pull bolts off so mount can come off enough to get harness behind it. A second set of hands here are extremely useful here to get light bar mounted, then to hold mount with light bar up while you get wire harness placed underneath the mount. On a side note, the bolts for windshield mount use a T-40 torx, and the bolts for the panel under the windshield wipers is a T-30 torx on '08 jeeps - probably the same size for all newer models as well... As far as installing the lights, use the short allen bolts included for the light bar mounting - the long ones are too long and will bottom out. You will not need these (or the small stand-off mounts included - don't know why they put these in this kit for a JK). Leave the short allen bolts loose in light bar until you have the mount re-installed after getting wire harness positioned properly underneath it, then aim light bar where you want it and tighten screws. I followed others suggestions regarding whistling noise experienced from the roof light bar, and installed door edge trim on back edge of lower fins prior to installing light bar, since that was the easiest time to do it. I used black door trim which blends in nicely with light bar finish, & is available at your local Walmart in an 18' roll for cheap. Never gave it a chance to see if I would have the same whistling or not - edge trim was cheap, and installing it first seemed like a no-brainer to me. Pod lights take a few minutes to figure out additional bracket for, seeing as how no instructions for installation for ANYTHING are included in this kit. The small curved bracket goes underneath the pod, with the stud in the pod going through the slot in the bracket. Be sure to put the included bolt in through the bracket prior to mounting bracket to the pod, with this end of bracket closest to front of pod - this bolt will be the mount bolt that attaches to the windshield bracket and allows for left/right aiming of pod. The stud on pod allows for up/down aiming of pod. Sorry for such a bad description, but there are several U-tube videos on the installation of this kit that show what I am trying to describe, and do a much better job of showing the pod assembly and installation. The included wire harness for the roof light bar leaves something to be desired, but does the job. There is a LOT of extra wiring coming from the light bar left over after hooking up light bar and running wiring down to engine compartment, but I left it and coiled/zip-tied it in a bundle for future re-wiring - I am going to be installing a relay box (S-pod) at a later date on left front of jeep engine compartment in the future, and there should be enough wiring here to reach the box where I am planning to mount it. Some have said they just wired the pod lights to the wire harness included, as kit doesn't include a separate harness for the pod lights, but I would recommend against this as light bar harness appears to only be built to handle the 300 watts needed for light bar. Adding the pods to same harness increases the amps an additional 10% and risks over-amping the harness and melting something or catching something on fire. I purchased the extra harness that Yitamotor makes for 2 light pods so that I can operate pods independently from light bar, since it was cheap (under 9 bucks). In hindsight, I wish I would have just made my own harness, as the one they make for 2 pods is not long enough to reach both pods in this set-up - 1 on each side of windshield. Harness had same problem as the supplied harness with it having a junk switch. It did have the required relay and in-line fuse needed for a separate circuit, but everything else on harness I either replaced because of using my own switches, or had to add extra wiring to harness to get it to reach both pods. The switch included in the included wire harness for the light bar is junk, but it does function (I left it wired to harness just until I had light bar installed to test it for operation, then cut it off and discarded it to run my own switch). If you will be using your own switch, you will cut off the small blue and black wires from back of the relay socket going to the switch, and only use the small white wire to run to your rocker switch. Make sure you cap and stow the blue wire you cut off if you don't cut it off flush at relay socket, as it will still have power to it, & you don't want it to touch something and short out the relay (blue wire was for power to the on/off indicators on included switch). This is what I did on mine, on the slim chance I may want this for a future hot lead for something that just needs a low amp power source. When running the wiring for a better quality rocker switch that can be hard-mounted in a switch bracket in cab (I chose the A-pillar replacement panel with cutouts for 4 horizontal switches), the white wire you left on wire harness from relay socket will run into the cab of vehicle and go to pin #3 on a 5-pin rocker switch (I used CH4x4 rocker switches on mine), then run a hot 12v + power wire to pin #2 (I ran mine from the cigarette lighter power wire), a switched power wire to pin #6 (on my JK, I found this on the orange/grey wire in the wire bundle just inboard of accelerator pedal & just forward of center console trim) This is a dimmable circuit on JKs, so backlight on switch comes on & dims with dash lights when dimming dash, Run a ground to pins #7 & 8 (jumper these two pins together and run a single wire to existing ground stud on vehicle). The pins on 5-pin rocker switches are used as follows: pin #2 - 12v power in to switch to operate accessory/lights; #3 - 12v power out from switch to relay to operate accessory/lights; #6 - dimmable power in for backlight in lower light (or RH light on horizontal switch); #7 - ground for upper/LH backlight; #8 - ground for lower/RH backlight. Using this wiring setup for switch lights up one side of switch with dimmable light enabled when you have running lights or headlights on, and other side of switch lights up full bright when accessory is switched on. Hope this helps anyone else who is thinking about purchasing this kit. I dropped 1 star due to issues with wiring harness and no instructions of any kind being included, but otherwise I am happy with this kit - they are extremely bright, and fairly cheap compared to some other brands. Time will tell how they hold up...
...
show more
Reviewed in the United States on October 4, 2017 by David Davis