Polymaker PETG Filament 1.75mm, 1kg Strong PETG 3D Printer Filament Lime Green - PolyLite PETG Lime 3D Printing Filament 1.75mm, Dimensional Accuracy +/- 0.03mm, Print with Most 3D Printers
Condition: New
Buy Now, Pay Later
As low as
$5
/ mo
Learn more
- – 4-month term
- – No impact on credit
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Afterpay, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
Eligible for Return, Refund or Replacement within 30 days of receipt
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Sunday, Aug 24
Color: 1kg Petg Lime Green (Hex Code: #C4d600)
Features
- Good Mechanical and Thermal Properties - More than 12 different colors and effects for your day-to-day creations. PolyLite PETG filament is designed for your special inventions and strong gadgets. PETG features 80 C (144 F) heat resistance and higher toughness than regular PLA. Selected color: lime green PETG filament 1.75mm ( PETG lime green Filament )
- Tangle Free & Moisture Free - PolyLite PETG filament 1.75 is carefully winded to avoid any tangling issues, dried, and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use
- Good Layer Adhesion & Rigidity - No warping, no jamming, no blobs or layer delamination issues. PolyLite PETG 1.75 is a worry-free 3D Printer Filament lime green that has great bed adhesion, very consistent color, and dimensional accuracy.Note - turn off the fan for the first layer for improved bed adhesion
- Cardboard Spool - PolyLite PETG 3D printing filament lime green comes in upgraded 3.0 version packaging with fully recycled cardboard spool and box
- Printing Settings - Nozzle: 235 C; Bed: 70 C; Speed: 60mm/s
Manufacturer: Polymaker
Brand: Polymaker
Item Weight: 2.2 pounds
Package Dimensions: 8.74 x 8.19 x 2.91 inches
Item model number: PB01041
Color: 1kg Petg Lime Green (Hex Code #C4d600)
Material Type: Polyethylene Terephthalate Glycol
Size: 1.75mm
Manufacturer Part Number: PB01041
Date First Available: May 30, 2022
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Sunday, Aug 24
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- PayTomorrow Financing
- Financing through Apple Pay
Learn more about financing & leasing here.
Top Amazon Reviews
Color: 1kg Petg Translucent Red (Hex Code: #Cb3...
I bought this to try after 2 years of only using PLA and finally got tired of my projects being fragile. I found that it is way easier to use PETG than I have read. I had NO adhension issues or essevive stringing as some describe with this type filament. The Translucent Red color is very cool. I am surprised at the strength of PETG and it will now be my "go to" for my printing. I find this filament worked best for me at 240C with a bed temp of 80C. The diameter is consistent and I had zero feed issues on the whole roll. I did have to change the nozzle tip (.4)in the beginning as the one I was using for PLA didn't seem to agree with continuing to use the old PLA used nozzle. I was probably due for a nozzle change anyway. Bottom line: Great price, strong prints, sticks to the bed and releases with ease after the bed cools. My unit is a Creality CR 6SE
...
show more
Reviewed in the United States on July 22, 2022 by raymond schilke
Color: 0.75kg Pla Teal
The media could not be loaded. Super strong, easy printing, great product. #PolymakerShill For a more detailed understanding of PolyMax PLA, you need to understand Polylite PLA and PLA Pro. Polylite PLA will snap if you bend it. PolyMax PLA will bend and show white stress marks but won't snap. PLA Pro is in the middle of the two. It will bend half way, show stress marks, and then snap. PolyLite is already stronger then the average PLA I've purchased or have seen, but PolyMax is crazy. I made a hammer, nail, and picture bracket and was able to punch straight through my wall. That picture has been hanging for the past few months.
...
show more
Reviewed in the United States on March 21, 2024 by Timothy Lentz
Color: 1kg Petg Dark Green (Hex Code: #3d441e)
I would say that this filament is slightly easier than most PETG to print, and I print a lot of PETG. The color is really good And has a very slight satin or semi gloss sheen.
Reviewed in the United States on May 18, 2024 by Scott McCrory
Color: 5kg, Petg Black (Hex Code: #000000)
First off, the filament worked perfectly fine. I could actually print my roll of PETG at 215, but I found 230 to be perfect for me. The only issues that came up were a result of my bowden tube being melted from trying to dial everything in (i had read you needed 250 or so, and PTFE tubes dont like that). Printed just fine, albeit a little stringy and blobby, but I got stringing to disappear with a 6mm retraction at 230, and blobs were cause by power recovery features, and were further reduced by enabling coasting. If you are experiencing a good deal of issue with the filament, do yourself a favor and check your PTFE tube. The only reason why stringing and blobs reappeared on my prints (after dialing in) was because the tube had been damaged, and I hadn't caught it. Replaced the bowden with capricorn XS, and havent had a problem yet. Also, keep in mind that clear filament doesnt equate to a clear print. You are trapping air between layers, and light is being diffracted along the lines you laid down. Unless you smooth the print afterward or print single line walls, you aren't likely to see through the part, and it isn't likely to be clear like glass unless you can smooth the layer lines or somehow make the wall one contiguous piece. You CAN, however, achieve clearer parts when viewed from above, but you may need to set monotonic infill to do it (keep all of the lines in the same orientation). This isnt really something that is the fault of the filament itself, but is the fault of the process your are using. For truly clear parts, try a resin printer instead of FDM.
...
show more
Reviewed in the United States on July 1, 2024 by EDWARD MCGUIRE
Color: 1kg Petg Translucent Green (Hex Code: #0...
Printed really good, I used it without drying out of the box and no drying was needed. After I left it in my dry box for a few weeks the quality was still good but I could see the signs of some moisture.
Reviewed in the United States on February 3, 2024 by Keyur Bhatnagar Keyur Bhatnagar
Color: 1kg Petg Translucent Red (Hex Code: #Cb3...
I have been using cr-series petg filaments and couldn't find transparent red for a project i was working on . This hit the mark . It is my experience that my printer prints transparent petg best at lower listed temps …bed 70°c and extruder 235°c . Opaque colors seem to like a bit more heat! But every setups different . P.S. the less infill the more transparent the color . Also if you use to much cooling or cooling fans at all you will distort the color and make it milky … so best used with no cooling or very little . Retraction needs turned up to a bit to keep the stringing down .
...
show more
Reviewed in the United States on April 19, 2024 by sara sara
Color: 1kg Petg Electric Blue (Hex Code: #0076cf)
I always buy this brand and it consistently works great.
Reviewed in the United States on April 20, 2024 by Chris Williams
**Update September 2021** Awful and unreliable. The two replacement reels were as bad as the two I returned. One managed to jam my printer so badly it is now out of alignment (I got stuck on a call during a print and 10 mins was all it took to damage my printer). I have no idea what is going on at Polymaker, but buyer beware. This filament is substandard and may cause damage to your printer. **Previous Review** The first two rolls of black PLA were fantastic. Good adhesion, no real warping, clean prints. The finish is less glossy than other PLA I've used, which I liked. I was able to print 28 pieces of my project in a row without any issues whatsoever. The pieces take about 3 hours each, so the printer was running non-stop for several days. I ordered two more rolls. Unfortunately, these have been awful. Both rolls are poorly wound. The filament snags on itself as it tries to print. The best case has been that I got half a print and a ball of extruded fuzz. I've also had the filament reel jam hard enough that the filament snapped. The worst case threw the entire printer out of alignment, which was a pain to resolve. So far, out of two reels I've managed one single successful print. Every few minutes, I have to go and unspool the reel for a few feet and gently wind the filament back on to the reel. Very disappointing. I switched to Polymaker after bad experiences with another cheaper brand. I was hoping for better. However, my initial results were good enough that I will try returning/exchanging the bad reels. We'll see if this was a rare occurrence or a regular problem.
...
show more
Reviewed in the United States on July 18, 2021 by Mom of 2