Nilight LED Light Bar 20Inch 288W Flood Spot Combo 28800LM Off Road Driving Lighting with Wiring Harness for Trucks Tractor Trailer Pickup Golf Cart SUV ATV UTV 4x4 Van Camper
Condition: New
Buy Now, Pay Later
As low as
$7.96
/ mo
Learn more
- – 6-month term
- – No impact on credit to apply
- – Instant approval decision
- – Secure and straightforward checkout
Ready to go? Add this product to your cart and select a plan during checkout.
Payment plans are offered through our trusted finance partners Klarna, Affirm, Afterpay, Zip, Apple Pay, and Google Pay. No-credit-needed leasing options through Acima may also be available at checkout.
Learn more about financing & leasing here.
Selected Option
Free shipping on this product
30-day returns
Learn more
FREE 30-day refund/replacement
To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
Availability:
In Stock.
Arrives
Monday, Aug 10
Recently Viewed
Size: 20Inch 288W Lights + Wiring Harness
Features
- BRIGHTNESS: Powerful 288 W LED light bar, high-quality Led chips, and clear PC lens, this LED pod emits 6000k pure white light, effectively light up the dark road during the night;
- COMBO BEAM: Spot and flood combo beam with triple row and nest reflector cup integrated with a light bar for optimal light spread.
- CIRCUIT PROTECTION: Power relay-safety protection and conversion circuit. Blade fuse protects the circuit when an overcurrent or short circuit occurs.
- ILLUMINATED SWITCH: 3 pin on/off rocker switch with red indicator light when truing on, easy to turn on or off, has been passed test of 5, 000 times pressing.
- PACKAGE INCLUDE:20Inch 288W Triple Row Light Bar + Wiring Harness Kit
- Fit type: Universal Fit
Description
Applications: Except for off road vehicle lighting, it can also be applied to Material handling, Agricultural machinery lighting, Marine LED lighting and Emergency And rescue LED lights, such as: Off-Road Vehicles: UTV, sand rail, buggy, ATV, SUV, truck, train, motorbike, bus, tank etc. Engineering Vehicles: excavator, road roller, bulldozer, crane, fork lift and mining truck etc.
Brand: Nilight
Color: White
Vehicle Service Type: Car
Voltage: 30 Volts
Light Source Type: LED
Form Factor: Bar
Recommended Uses For Product: Vehicle Exterior
Auto Part Position: Front
Included Components: LED Light Bar with Wiring Harness
Fit Type: Universal Fit
Compatible with Vehicle Type: Car
Voltage: 30 Volts
Light Source Type: LED
Form Factor: Bar
Auto Part Position: Front
Fit Type: Universal Fit
Additional Features: Waterproof
Water Resistance Level: Waterproof
Includes Remote?: No
Shape: bar
Automotive Fit Type: Universal Fit
Item Weight: 1.92 Kilograms
Number of Pieces: 1
Color: White
Material Type: Polycarbonate (PC)
Brand Name: Nilight
Included Components: LED Light Bar with Wiring Harness
Manufacturer: Niligh
UPC: 767912576978
Model Number: ZH403
Manufacturer Part Number: ZH403
Unit Count: 1 Count
Manufacturer Warranty Description: 2 Years Warranty
Item Type Name: Nilight 20Inch 288W Triple Row Flood Spot Combo LED Light Bar Waterproof 28800LM Off Road Driving Lamp with Wiring Harness for Boat Trucks Pickup Jeep SUV ATV UTV
Recommended Uses For Product: Vehicle Exterior
Frequently asked questions
If you place your order now, the estimated arrival date for this product is:
Monday, Aug 10
Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
To initiate a return, please visit our Returns Center.
View our full returns policy here.
- Klarna Financing
- Affirm Pay in 4
- Affirm Financing
- Afterpay Financing
- Zip Pay in 4
- Financing through Apple Pay
- Financing through Google Pay
Learn more about financing & leasing here.
Similar Products
![True Mods 2pc 7" Ultra-Slim Single Row Off Road LED Light Bar [1530lm] [18W] [IP68 Waterproof] [12V - 24V] Fog/Driving/Work Lights for Trucks ATV Cars - 30 Degrees Spot Light](https://m.media-amazon.com/images/I/81Sbq2cKTdL._AC_US500_.jpg)
Top Amazon Reviews
Size: 20Inch 288W Lights + Wiring Harness
Brightness: extremely bright for its size. Long row of bright spot lights with a smaller row of fog lights on each end. Mounting: putting it behind my grille guard was extremely easy. The included wiring harness was a breeze to install for my first time. There are no instructions but a very straightforward chart with how and where to wire everything. Installation of the on/off switch was as easy as drilling a hole and pushing it through the rubber gasket with the rest of the vehicles wires. Final thoughts: Nilight’s durability and price is consistent with all products. My low beams are great, and the yellow flood lights have worked for months and even survived being ripped off my car with my old brush guard. Heads up: buy a battery extension bolt. If your accessory wires on your battery seem to be loose or the bolt doesn’t screw in much, just buy it and save yourself some trouble of a dead car with a loose battery bolt.
...
show more
Reviewed in the United States on December 25, 2023 by Jake Edvalson
Size: 20Inch 126W Lights + Wiring Harness
I installed this light bar and wire harness on my 2016 Jeep Wrangler. It mounted perfectly on top of the bull-bar brackets on EAG front bumper. The light is very bright, and the harness is well made. The install wound up taking me about three hours but would have only taken one hour for a smarter man. See the story below for a detailed description of my dumbassary. The Story Below: Getting the bar out of the way first…. Pretty simple---I just put on the mounting brackets like they appear they should be put on. Then, I set the brackets 12” apart (6” from center point of the bar) and the bolts slid right into the bracket points on my bull-bar. Easiest part of the whole install. The only even minor issue is that they supplied three extra washers and an extra screw which caused me to wonder if I’d missed something. I drove it around over some bumps and such to see if I could shake it loose but it held in place pretty well. I didn’t hook up the harness until I could set aside some time to do so. Good thing that! It took me a lot longer than I’d anticipated. I’ll start from the relay. I pinned the tab down on the insulation keeper post in the top PS corner of the engine compartment, and zip tied it to the existing harness for added stability. From there I made three ‘runs’ ; Battery, Switch, and Light-bar. I’ll tell you about them in order of increasing difficulty. Battery- Yeah, just put the red on the red and the black on the black. Switch- This leg of the harness has an inline connector and a toggle switch at the end. Starting from the relay, I ran it behind the existing harness using two zip-ties so that the connector winds up close to the DS corner on the other side of the engine compartment. I pulled the a-pillar inside cover and the DS dash end-cover off and ran the wire through a hole I found that let me snake the wire through the void under the hood cowling. This hole was filled with insulating foam, but I shoved a wire hanger through it and drug the harness (spade connectors attached) back from the engine compartment side into the cabin. I drilled a ¾” hole in the a-pillar panel---pushed in the toggle button, replaced all the panels and then went back to the engine side to zip-tie the harness to the existing harness and reconnect the connector. Weirdly, there was exactly enough wire to do this---makes me wonder if Nilight didn’t have this exact install in mind. Light-Bar- I just snaked this along the top edge of the PS side, and under the fuse box mounting bracket. Then, I undid the grill to get access so I could drop down to the existing fog light harness that goes to the bumper. I’m putting zip ties all along here about every foot or so---just to keep things tidy. The harness has two light connector branches and since I only needed one, I used electrical tape to seal up the first one, taping it to the harness for safe keeping. Now, THE FUN PART! – When I mounted the light, I drilled a hole in the bull-bar just under the DS mounting bracket. Since this bar is welded through the bumper, it’s open at the underside. “I can just snake the wires through that.” I thought. It’s like trying to shove a noodle through a straw! I abandoned the “shove it through” approach, then I abandoned the “pull it through with a coat hanger wire” approach and came up with the “hook-up-a-shop-vac-to-the-lower-end-and-suck-a-length-of- paracord-through-the-hole” approach. This worked so well that the first time I tried it, it snatched four feet of paracord out of my hand before I could kill the shop vac. I cut the spade connectors off and was then able to drag the connector wires up and out of the hole under the bracket. I connected them to the light with some of those melty solder butt-joint connectors, then slipped that back through the hole in the bull bar and sealed it up with some silicone sealer. I’d tested the harness and even hooked everything up to the light, so I knew it was good at that point, but when I flipped the switch---no joy. I checked all the connections, then realized there was an in-line 15 amp fuse…Yup---blown. I replaced it and blew it again just to make sure. I looked all along the runs for places I might have shorted it and was about to pull the A-pillar panels when I remembered that extra light connector I had taped up. Sure enough, I didn’t cut off the spade connectors there and had taped them together on the harness---creating a very solid and efficient short-circuit. Fixing this took about another half hour, but then It worked great. I’m not sure how many Lumens are generated by the Nilight - ZH006. It claims 126 W using 42 3W LEDs. I drove it out to a local area with an open field and totally ruined the circadian rhythms of about fifty Whitetails. It’s like driving around with a small sun on your bumper, in fact---if I ever accidentally shined this in another drivers eyes, I think an assault charge would be in order and I’d plead guilty with no contest. Nilight 20-Inch 126W Spot Flood Combo Offroad LED Light Bar & Wiring H – Nilight Led Light
...
show more
Reviewed in the United States on July 17, 2021 by Anthony N Jackson
Size: 20Inch 126W Lights + Wiring Harness
So far love the brightness, quality, and ease of install. I bought 2 lights kits to install on my utility tractor for winter snow removal front and rear visibility. I bought the light kit that included the wiring harness as it was the most cost effective and I was running both separately. Product notes say you can connect 2 lights to one harness, which is true, but those would have to be installed within 3 feet, which was not my case. So 2 lights can run on one harness, but know they need to be installed close to each other. I cut off the extra connectors and sealed to waterproof the wires. I bought a mount kit for the front. I needed to add longer screws to clamp to my front guard . I did not want to drill through the front steel guard at this time. May do that in future. The rear was mounted on the rollover frame and the holes I used were already factory made, so that was easy. The mounts on the light are adjustable and slide the full length of the light body. I ran the wire down the outside and secured with special outdoor zipties. The switches included on the harness are waterproof and light up when on, which is great addition! Once I drilled a hole in the plastic dash the switches snapped into the opening securely. Use a tapered bit as you can test the hole size as you go!! The switch had a quick connector so once that just fit through the hole I know the switch would lock in securely. Install was easy and has inline fuse built into the harness. All parts needed to connect are included, even extra fuses and connectors. I used heat shrink to seal all connections since they would be exposed to water and snow. Also, since I mounted the light upside down, I seals with caulk the area where the wire enters the light body, just to be sure. I recommend these to add a bright light to any application!
...
show more
Reviewed in the United States on November 1, 2020 by tkgibson tkgibson
Size: 20Inch 126W Lights + Wiring Harness
The light bar arrived in great condition and works well. Installation was straight forward and does reqire a little bit of knowledge on wireing. The light is super bright for its size. Would recommend.
Reviewed in the United States on December 30, 2023 by ALB
Size: 20Inch 126W Lights + Wiring Harness
Easy to install. I didn't give it 5 stars because the directions didn't tell me the drill size for installing the power button.
Reviewed in the United States on January 12, 2024 by paul lauer
Size: 20Inch 288W Lights + Wiring Harness
Light is bright and I like the way it pans out on the edges. It's bright and great for some off road adventures. Wiring was pretty simple.. just mounting the light took hours. They need to send more brackets that are different sizes.. I ended up making my own .. but the product is awesome so far
Reviewed in the United States on March 13, 2024 by ted arsenault
Size: 22Inch Side Shooter Light + Wiring harness
Put these on last night along with some other lights an air horns. They look good, very bright, easy to install, great price. Will be doing another review soon.
Reviewed in the United States on November 19, 2023 by John R Adams
Size: 22Inch Side Shooter Light + Wiring harness
Nice and bright this light was installed on a forklift and it made a lot of difference after installed it works great and alot of brightness i would recommend it.
Reviewed in the United States on February 21, 2024 by Alex Morales