That product is currently unavailable. Please try a different product or see this article for help.
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar

iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar

iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
iJDMTOY AA3117-Black Universal Fit Bull Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible with Off-Road Work Lamps, LED Lighting Bar
$39.59
Checking for changes Product info up-to-date Product info updated We've detected that this product is out of stock. Enter your email below and we will notify you when it is available.
Buy Now, Pay Later
4 equal payments of $
- Zero interest
- No credit check
- Quick & easy checkout

Free shipping on this product


Availability: Only 16 left in stock - order soon.
Fulfilled by Amazon


Get it by Tuesday, Jul 14
Order within 16 hr 31 min

Features

  • Universal mounting bracket using front license plate mount location (no drill, no modification required for most cases)
  • Made with 1. 5mm thick heavy-duty stainless steel with semi-gloss black paint, once you hold it, you can feel the weight
  • Unlike many other ones on the market that are made with very flimsy aluminum, which cannot withstand the impact or actually mount the LED lightbar on it
  • Four different locations/methods to mount any off-road pod lights, LED work lamps or LED light bar, etc
  • If the existing holes are only on the plastic bumper, you may use the additional holes on the side of the bracket plane to secure the bull bar. In this case, we recommend drilling holes to mount the bracket onto the vehicle
  • Fit Type: Pod Cube Lightbar Iron Worklight Relocation Relocator Pilot Bullbar Guard Driving Car Rear Drl

Description

iJDMTOY Bull Bar Style Stainless Steel Front Bumper License Plate Mount Bracket Holder For Off-Road Lights, LED Work Lamps, LED Lighting Bars, etc (Black, Universal Fit) This page features one piece universal fit black front bumper license plate mounting bracket to provide you the easiest way to install the Off-road LED work light, LED DRL lights, or LED light bar for your car, jeep, truck or SUV without any modification! There is no drill required, simply bolt this bracket back together with the front license plate to give you four different methods to install the Off-road lights: On the bull bar 2 sets of mounting holes on top 1 set of mounting holes on in front Note 1. There is a possibility that the bracket holder may block some vehicles' parking sensor. In some cases, you may be able to drill additional holes on the bracket to securely mount the brackets. 2. If the existing holes are only on the plastic bumper, you may use the additional holes on the side of the bracket plane to secure the bull bar. In this case we recommend drilling holes to mount the bracket onto the vehicle. Fitments: most trucks SUV Chevy Chevrolet Dodge Ford GMC Jeep Subaru Nissan Toyota Picture 1 Picture 2 Picture 3 The perfect simple mounting solution for your LED light bars, pod lights, work lights, etc!


Manufacturer IJDMTOY Auto Accessories


Brand IJDMTOY


Model Mounting Holding Kit For LED Bar, Fog


Item Weight 3 pounds


Package Dimensions 24 x 5.5 x 4.1 inches


Item model number AA3117-Black


Is Discontinued By Manufacturer No


Exterior Painted


Manufacturer Part Number AA3117-Black


OEM Part Number Fit Chevy Chevrolet Avalanche Colorado CK Pickup Silverado 1500 2500HD 3500HD Tahoe Suburban Trailblazer, Dodge Dakota Durango Ram 1500 2500 3500 4500 RAM1500 RAM2500, Ford Expedition Explorer F-150 F-250 F-350 F-450 Raptor Super Duty Ranger, GMC Canyon Denali Jimmy Sierra Yukon XL, Jeep Grand Cherokee Wrangler JK Unlimited, Subaru Forester WRX Impreza, Nissan Frontier Titan Xterra, Toyota 4Runner FJ Cruiser Land Cruiser Tacoma Tundra, etc, Fit all years


Folding No


Cover Included Black painted front license plate mount bullbar support for LED lights


Bulb Type Led


ASIN B018JAESDM


Customer Reviews 4.2 out of 5 stars 139 ratings 4.2 out of 5 stars


Best Sellers Rank #18,836 in Automotive (See Top 100 in Automotive) #165 in Automotive Light Bars


Date First Available November 25, 2015


Shipping

This product includes free shipping to all US addresses.


Delivery

Unless otherwise stated above, most products arrive within 2-3 business days. Larger items may take 6-9 business days. Tracking information will be automatically provided as soon as your order ships.


View our full shipping policy here.

Returns

This product can be returned within 30 days of delivery for a full refund. Please visit our returns center to begin a return.

View our full returns policy here.

Features

  • Universal mounting bracket using front license plate mount location (no drill, no modification required for most cases)
  • Made with 1. 5mm thick heavy-duty stainless steel with semi-gloss black paint, once you hold it, you can feel the weight
  • Unlike many other ones on the market that are made with very flimsy aluminum, which cannot withstand the impact or actually mount the LED lightbar on it
  • Four different locations/methods to mount any off-road pod lights, LED work lamps or LED light bar, etc
  • If the existing holes are only on the plastic bumper, you may use the additional holes on the side of the bracket plane to secure the bull bar. In this case, we recommend drilling holes to mount the bracket onto the vehicle
  • Fit Type: Pod Cube Lightbar Iron Worklight Relocation Relocator Pilot Bullbar Guard Driving Car Rear Drl

Description

iJDMTOY Bull Bar Style Stainless Steel Front Bumper License Plate Mount Bracket Holder For Off-Road Lights, LED Work Lamps, LED Lighting Bars, etc (Black, Universal Fit) This page features one piece universal fit black front bumper license plate mounting bracket to provide you the easiest way to install the Off-road LED work light, LED DRL lights, or LED light bar for your car, jeep, truck or SUV without any modification! There is no drill required, simply bolt this bracket back together with the front license plate to give you four different methods to install the Off-road lights: On the bull bar 2 sets of mounting holes on top 1 set of mounting holes on in front Note 1. There is a possibility that the bracket holder may block some vehicles' parking sensor. In some cases, you may be able to drill additional holes on the bracket to securely mount the brackets. 2. If the existing holes are only on the plastic bumper, you may use the additional holes on the side of the bracket plane to secure the bull bar. In this case we recommend drilling holes to mount the bracket onto the vehicle. Fitments: most trucks SUV Chevy Chevrolet Dodge Ford GMC Jeep Subaru Nissan Toyota Picture 1 Picture 2 Picture 3 The perfect simple mounting solution for your LED light bars, pod lights, work lights, etc!


Manufacturer IJDMTOY Auto Accessories


Brand IJDMTOY


Model Mounting Holding Kit For LED Bar, Fog


Item Weight 3 pounds


Package Dimensions 24 x 5.5 x 4.1 inches


Item model number AA3117-Black


Is Discontinued By Manufacturer No


Exterior Painted


Manufacturer Part Number AA3117-Black


OEM Part Number Fit Chevy Chevrolet Avalanche Colorado CK Pickup Silverado 1500 2500HD 3500HD Tahoe Suburban Trailblazer, Dodge Dakota Durango Ram 1500 2500 3500 4500 RAM1500 RAM2500, Ford Expedition Explorer F-150 F-250 F-350 F-450 Raptor Super Duty Ranger, GMC Canyon Denali Jimmy Sierra Yukon XL, Jeep Grand Cherokee Wrangler JK Unlimited, Subaru Forester WRX Impreza, Nissan Frontier Titan Xterra, Toyota 4Runner FJ Cruiser Land Cruiser Tacoma Tundra, etc, Fit all years


Folding No


Cover Included Black painted front license plate mount bullbar support for LED lights


Bulb Type Led


ASIN B018JAESDM


Customer Reviews 4.2 out of 5 stars 139 ratings 4.2 out of 5 stars


Best Sellers Rank #18,836 in Automotive (See Top 100 in Automotive) #165 in Automotive Light Bars


Date First Available November 25, 2015


Shipping

This product includes free shipping to all US addresses.


Delivery

Unless otherwise stated above, most products arrive within 2-3 business days. Larger items may take 6-9 business days. Tracking information will be automatically provided as soon as your order ships.


View our full shipping policy here.

Returns

This product can be returned within 30 days of delivery for a full refund. Please visit our returns center to begin a return.

View our full returns policy here.

Features

  • Universal mounting bracket using front license plate mount location (no drill, no modification required for most cases)
  • Made with 1. 5mm thick heavy-duty stainless steel with semi-gloss black paint, once you hold it, you can feel the weight
  • Unlike many other ones on the market that are made with very flimsy aluminum, which cannot withstand the impact or actually mount the LED lightbar on it
  • Four different locations/methods to mount any off-road pod lights, LED work lamps or LED light bar, etc
  • If the existing holes are only on the plastic bumper, you may use the additional holes on the side of the bracket plane to secure the bull bar. In this case, we recommend drilling holes to mount the bracket onto the vehicle
  • Fit Type: Pod Cube Lightbar Iron Worklight Relocation Relocator Pilot Bullbar Guard Driving Car Rear Drl

Description

iJDMTOY Bull Bar Style Stainless Steel Front Bumper License Plate Mount Bracket Holder For Off-Road Lights, LED Work Lamps, LED Lighting Bars, etc (Black, Universal Fit) This page features one piece universal fit black front bumper license plate mounting bracket to provide you the easiest way to install the Off-road LED work light, LED DRL lights, or LED light bar for your car, jeep, truck or SUV without any modification! There is no drill required, simply bolt this bracket back together with the front license plate to give you four different methods to install the Off-road lights: On the bull bar 2 sets of mounting holes on top 1 set of mounting holes on in front Note 1. There is a possibility that the bracket holder may block some vehicles' parking sensor. In some cases, you may be able to drill additional holes on the bracket to securely mount the brackets. 2. If the existing holes are only on the plastic bumper, you may use the additional holes on the side of the bracket plane to secure the bull bar. In this case we recommend drilling holes to mount the bracket onto the vehicle. Fitments: most trucks SUV Chevy Chevrolet Dodge Ford GMC Jeep Subaru Nissan Toyota Picture 1 Picture 2 Picture 3 The perfect simple mounting solution for your LED light bars, pod lights, work lights, etc!


Manufacturer IJDMTOY Auto Accessories


Brand IJDMTOY


Model Mounting Holding Kit For LED Bar, Fog


Item Weight 3 pounds


Package Dimensions 24 x 5.5 x 4.1 inches


Item model number AA3117-Black


Is Discontinued By Manufacturer No


Exterior Painted


Manufacturer Part Number AA3117-Black


OEM Part Number Fit Chevy Chevrolet Avalanche Colorado CK Pickup Silverado 1500 2500HD 3500HD Tahoe Suburban Trailblazer, Dodge Dakota Durango Ram 1500 2500 3500 4500 RAM1500 RAM2500, Ford Expedition Explorer F-150 F-250 F-350 F-450 Raptor Super Duty Ranger, GMC Canyon Denali Jimmy Sierra Yukon XL, Jeep Grand Cherokee Wrangler JK Unlimited, Subaru Forester WRX Impreza, Nissan Frontier Titan Xterra, Toyota 4Runner FJ Cruiser Land Cruiser Tacoma Tundra, etc, Fit all years


Folding No


Cover Included Black painted front license plate mount bullbar support for LED lights


Bulb Type Led


ASIN B018JAESDM


Customer Reviews 4.2 out of 5 stars 139 ratings 4.2 out of 5 stars


Best Sellers Rank #18,836 in Automotive (See Top 100 in Automotive) #165 in Automotive Light Bars


Date First Available November 25, 2015


abunda_amazon_reviews Installed on a 1992 Suburban. This was a good buy. While reviews might say it is cheap or flimsy, it is not. If you mount it properly by drilling holes in and attaching it with nuts and bolts rather than screws, it will be very sturdy. I don't notice any shake or rattle when I am driving. I mounted it to the existing plate holder just drilled through. Mounted 2 Hella lights on it and it looks and fits perfect. It's pretty lightweight so it offers no protection as a push bar would, it's simply a light mount. Knowing that, 5 stars. UPDATE: If I could give more than 5 stars I would. Got into a minor crash when a vehicle backed into me and hit the bull bar. It wasn't even bent or mangled, other than a scratch in the paint it was fine. The other car's trunk was smashed in. So if there is any though that it's flimsy I can tell you it is not.;;Reviewed in the United States on October 22, 2016;;5.0 out of 5 stars;;Good looking and perfect fit;;A E D III;;;No mounting hardware or instructions but pretty straight forward for mounting. Not great but accomplished my need for a mounting auxiliary lights to my car. I mounted it upside down.;;Reviewed in the United States on January 25, 2016;;4.0 out of 5 stars;;No mounting hardware or instructions but pretty straight forward for mounting;;Max A Davidson;;;Seems to be a pretty solid piece of equipment. I didn't want a crazy substantial under-mounted bumper guard and this fits a 20" LED light bar perfectly. I actually mounted mine upside down because I wanted the bar itself to be level with where the black underpart of the bumper started. I drilled 4 holes into the bumper for the exact placement I wanted and put metal flat brackets behind the screw points to give added support to the holes. I just used 2 simple brackets to mount the license plate. It works well on my Subaru Crosstrek.;;Reviewed in the United States on May 21, 2017;;5.0 out of 5 stars;;Great for a simple LED Lightbar;;M. Larson;;;Perfect for what I needed, lightweight but still rugged enough that I trust it with my lights. The welds are clean and the finish is perfect. I recommend using self tapping screws if you have viable metal behind your license plate screws. (Probe before drilling with an awl) I thankfully only had 3" of foam and air in between the screw holes and good steel. I also used some 30lb. Gorilla mounting tape on the backside to reduce vibrations, as well as spray a few ounces of expanding foam in the cavity behind the license plate mounts. I knew the self tapping screws under torque would squish the plastic bumper a bit so I wanted some support, hence the foam. Subarus bumpers are designed to buckle so you have to get 3" self tappers for you to grab the interior bumper. I may also be able to mount this just under my grille, with the bracket hooking over the back to the steel bumper support, as the geometry is perfect. I'll probably end up doing that for winter because a snow bank right now would shred this thing off. Overall, very pleased, my only complaint is that it's so universal, it's made for all number plates, US plates leave a 1 inch gap on each side of this mount.;;Reviewed in the United States on August 1, 2017;;5.0 out of 5 stars;;Fits 05 Forester well;;PizzaMan;;;When I hit a deer recently (not too hard) it cracked my front bumper which needed to be replaced. I removed the fog lights from the holder and asked the body shop replacing the bumper to re install my existing bar. Of curse the car was returned without the bar, and they broke the weld spots, so the bar was separated from the mounting plate. The didn’t want to re weld aluminum so I told them not to worry. These things are cheap enough. 3 days later I had a brand new one. Now made in black (my old one was Plasti dipped chrome). Needed to drill a couple of custom holes to mount it to the metal under the bumper, but it’s perfect. Note, if you aren’t comfortable removing the grill of your car and potentially drilling some holes, this may not be the best diy project. Even if the holes lined up perfectly with my license plate holes, if you are planning to mount any weight on these be sure to secure them to the metal past the bumper. If you don’t, lights will vibrate and move around as you drive. Great inexpensive solution;;Reviewed in the United States on January 26, 2019;;5.0 out of 5 stars;;Perfect. This is my second one, body shop de-welded my first (read: broke);;Richard S.;;;I received this bar and the first thing I did was to verify if it was stainless or not. My magnet did not stick to this bar anywhere. First in my area with something like this on my car with a triple row led bar on it. I do get stares from passers by. A mechanic at a local gas station came out and said he really like it. Would have had to remove the whole front bumper fascia to bolt this to the frame. I chose not to. Used the 8mm opening with a super thick flat washer and lock nuts behind. Yes 8mm button head. It vibrates very little and only when the dirt road is a washboard.;;Reviewed in the United States on May 12, 2017;;5.0 out of 5 stars;;For those in doubt.;;robo6400;;;Surprised by the quality of this thing. It's super sturdy, the welds look great, powdercoating is flawless and installation was as easy as installing a license plate. Have a pair of 6" Hella driving lights on it and is solid. Definitely recommended for anyone looking for an inexpensive way to mount aux lights to your vehicle.;;Reviewed in the United States on April 27, 2016;;5.0 out of 5 stars;;It's super sturdy, the welds look great;;Nick Smith;;;Item is just "ok". Its light weight, not designed to hold heavy lighting. Also, my car which it is supposed to fit, had no metal behind the plastic bumper cover so it will not simply attach via nuts and bolts like they would have you believe. Paint finish is very delicate. It will look terrible is just a few weeks of bug guts, rocks, road salt and debris. For its purpose, its ok. Don't plan for this to save your bumper in a crash.;;Reviewed in the United States on June 29, 2017;;3.0 out of 5 stars;;Meh....;;Steve Marshall

Shipping

This product includes free shipping to all US addresses.


Delivery

Orders placed now will arrive in 6-9 business days. Tracking information will be automatically provided as soon as your order ships.


View our full shipping policy here.

Returns

This product can be returned within 30 days of delivery for a full refund. Please visit our returns center to begin a return.

View our full returns policy here.

Top Amazon Reviews


5.0 out of 5 stars
By A E D III - Reviewed in the United States on October 22, 2016
Good looking and perfect fit
Installed on a 1992 Suburban. This was a good buy. While reviews might say it is cheap or flimsy, it is not. If you mount it properly by drilling holes in and attaching it with nuts and bolts rather than screws, it will be very sturdy. I don't notice any shake or rattle when I am driving. I mounted it to the existing plate holder just drilled through. Mounted 2 Hella lights on it and it looks and fits perfect. It's pretty lightweight so it offers no protection as a push bar would, it's simply a light mount. Knowing that, 5 stars. UPDATE: If I could give more than 5 stars I would. Got into a minor crash when a vehicle backed into me and hit the bull bar. It wasn't even bent or mangled, other than a scratch in the paint it was fine. The other car's trunk was smashed in. So if there is any though that it's flimsy I can tell you it is not.

4.0 out of 5 stars
By Max A Davidson - Reviewed in the United States on January 25, 2016
No mounting hardware or instructions but pretty straight forward for mounting
No mounting hardware or instructions but pretty straight forward for mounting. Not great but accomplished my need for a mounting auxiliary lights to my car. I mounted it upside down.

5.0 out of 5 stars
By M. Larson - Reviewed in the United States on May 21, 2017
Great for a simple LED Lightbar
Seems to be a pretty solid piece of equipment. I didn't want a crazy substantial under-mounted bumper guard and this fits a 20" LED light bar perfectly. I actually mounted mine upside down because I wanted the bar itself to be level with where the black underpart of the bumper started. I drilled 4 holes into the bumper for the exact placement I wanted and put metal flat brackets behind the screw points to give added support to the holes. I just used 2 simple brackets to mount the license plate. It works well on my Subaru Crosstrek.

5.0 out of 5 stars
By PizzaMan - Reviewed in the United States on August 1, 2017
Fits 05 Forester well
Perfect for what I needed, lightweight but still rugged enough that I trust it with my lights. The welds are clean and the finish is perfect. I recommend using self tapping screws if you have viable metal behind your license plate screws. (Probe before drilling with an awl) I thankfully only had 3" of foam and air in between the screw holes and good steel. I also used some 30lb. Gorilla mounting tape on the backside to reduce vibrations, as well as spray a few ounces of expanding foam in the cavity behind the license plate mounts. I knew the self tapping screws under torque would squish the plastic bumper a bit so I wanted some support, hence the foam. Subarus bumpers are designed to buckle so you have to get 3" self tappers for you to grab the interior bumper. I may also be able to mount this just under my grille, with the bracket hooking over the back to the steel bumper support, as the geometry is perfect. I'll probably end up doing that for winter because a snow bank right now would shred this thing off. Overall, very pleased, my only complaint is that it's so universal, it's made for all number plates, US plates leave a 1 inch gap on each side of this mount.

5.0 out of 5 stars
By Richard S. - Reviewed in the United States on January 26, 2019
Perfect. This is my second one, body shop de-welded my first (read: broke)
When I hit a deer recently (not too hard) it cracked my front bumper which needed to be replaced. I removed the fog lights from the holder and asked the body shop replacing the bumper to re install my existing bar. Of curse the car was returned without the bar, and they broke the weld spots, so the bar was separated from the mounting plate. The didn’t want to re weld aluminum so I told them not to worry. These things are cheap enough. 3 days later I had a brand new one. Now made in black (my old one was Plasti dipped chrome). Needed to drill a couple of custom holes to mount it to the metal under the bumper, but it’s perfect. Note, if you aren’t comfortable removing the grill of your car and potentially drilling some holes, this may not be the best diy project. Even if the holes lined up perfectly with my license plate holes, if you are planning to mount any weight on these be sure to secure them to the metal past the bumper. If you don’t, lights will vibrate and move around as you drive. Great inexpensive solution

5.0 out of 5 stars
By robo6400 - Reviewed in the United States on May 12, 2017
For those in doubt.
I received this bar and the first thing I did was to verify if it was stainless or not. My magnet did not stick to this bar anywhere. First in my area with something like this on my car with a triple row led bar on it. I do get stares from passers by. A mechanic at a local gas station came out and said he really like it. Would have had to remove the whole front bumper fascia to bolt this to the frame. I chose not to. Used the 8mm opening with a super thick flat washer and lock nuts behind. Yes 8mm button head. It vibrates very little and only when the dirt road is a washboard.

5.0 out of 5 stars
By Nick Smith - Reviewed in the United States on April 27, 2016
It's super sturdy, the welds look great
Surprised by the quality of this thing. It's super sturdy, the welds look great, powdercoating is flawless and installation was as easy as installing a license plate. Have a pair of 6" Hella driving lights on it and is solid. Definitely recommended for anyone looking for an inexpensive way to mount aux lights to your vehicle.

3.0 out of 5 stars
By Steve Marshall - Reviewed in the United States on June 29, 2017
Meh....
Item is just "ok". Its light weight, not designed to hold heavy lighting. Also, my car which it is supposed to fit, had no metal behind the plastic bumper cover so it will not simply attach via nuts and bolts like they would have you believe. Paint finish is very delicate. It will look terrible is just a few weeks of bug guts, rocks, road salt and debris. For its purpose, its ok. Don't plan for this to save your bumper in a crash.

Recent Reviews


5.0 out of 5 stars
By A E D III - Reviewed in the United States on October 22, 2016
Good looking and perfect fit
Installed on a 1992 Suburban. This was a good buy. While reviews might say it is cheap or flimsy, it is not. If you mount it properly by drilling holes in and attaching it with nuts and bolts rather than screws, it will be very sturdy. I don't notice any shake or rattle when I am driving. I mounted it to the existing plate holder just drilled through. Mounted 2 Hella lights on it and it looks and fits perfect. It's pretty lightweight so it offers no protection as a push bar would, it's simply a light mount. Knowing that, 5 stars. UPDATE: If I could give more than 5 stars I would. Got into a minor crash when a vehicle backed into me and hit the bull bar. It wasn't even bent or mangled, other than a scratch in the paint it was fine. The other car's trunk was smashed in. So if there is any though that it's flimsy I can tell you it is not.

4.0 out of 5 stars
By Max A Davidson - Reviewed in the United States on January 25, 2016
No mounting hardware or instructions but pretty straight forward for mounting
No mounting hardware or instructions but pretty straight forward for mounting. Not great but accomplished my need for a mounting auxiliary lights to my car. I mounted it upside down.

5.0 out of 5 stars
By M. Larson - Reviewed in the United States on May 21, 2017
Great for a simple LED Lightbar
Seems to be a pretty solid piece of equipment. I didn't want a crazy substantial under-mounted bumper guard and this fits a 20" LED light bar perfectly. I actually mounted mine upside down because I wanted the bar itself to be level with where the black underpart of the bumper started. I drilled 4 holes into the bumper for the exact placement I wanted and put metal flat brackets behind the screw points to give added support to the holes. I just used 2 simple brackets to mount the license plate. It works well on my Subaru Crosstrek.

5.0 out of 5 stars
By PizzaMan - Reviewed in the United States on August 1, 2017
Fits 05 Forester well
Perfect for what I needed, lightweight but still rugged enough that I trust it with my lights. The welds are clean and the finish is perfect. I recommend using self tapping screws if you have viable metal behind your license plate screws. (Probe before drilling with an awl) I thankfully only had 3" of foam and air in between the screw holes and good steel. I also used some 30lb. Gorilla mounting tape on the backside to reduce vibrations, as well as spray a few ounces of expanding foam in the cavity behind the license plate mounts. I knew the self tapping screws under torque would squish the plastic bumper a bit so I wanted some support, hence the foam. Subarus bumpers are designed to buckle so you have to get 3" self tappers for you to grab the interior bumper. I may also be able to mount this just under my grille, with the bracket hooking over the back to the steel bumper support, as the geometry is perfect. I'll probably end up doing that for winter because a snow bank right now would shred this thing off. Overall, very pleased, my only complaint is that it's so universal, it's made for all number plates, US plates leave a 1 inch gap on each side of this mount.

5.0 out of 5 stars
By Richard S. - Reviewed in the United States on January 26, 2019
Perfect. This is my second one, body shop de-welded my first (read: broke)
When I hit a deer recently (not too hard) it cracked my front bumper which needed to be replaced. I removed the fog lights from the holder and asked the body shop replacing the bumper to re install my existing bar. Of curse the car was returned without the bar, and they broke the weld spots, so the bar was separated from the mounting plate. The didn’t want to re weld aluminum so I told them not to worry. These things are cheap enough. 3 days later I had a brand new one. Now made in black (my old one was Plasti dipped chrome). Needed to drill a couple of custom holes to mount it to the metal under the bumper, but it’s perfect. Note, if you aren’t comfortable removing the grill of your car and potentially drilling some holes, this may not be the best diy project. Even if the holes lined up perfectly with my license plate holes, if you are planning to mount any weight on these be sure to secure them to the metal past the bumper. If you don’t, lights will vibrate and move around as you drive. Great inexpensive solution

5.0 out of 5 stars
By robo6400 - Reviewed in the United States on May 12, 2017
For those in doubt.
I received this bar and the first thing I did was to verify if it was stainless or not. My magnet did not stick to this bar anywhere. First in my area with something like this on my car with a triple row led bar on it. I do get stares from passers by. A mechanic at a local gas station came out and said he really like it. Would have had to remove the whole front bumper fascia to bolt this to the frame. I chose not to. Used the 8mm opening with a super thick flat washer and lock nuts behind. Yes 8mm button head. It vibrates very little and only when the dirt road is a washboard.

5.0 out of 5 stars
By Nick Smith - Reviewed in the United States on April 27, 2016
It's super sturdy, the welds look great
Surprised by the quality of this thing. It's super sturdy, the welds look great, powdercoating is flawless and installation was as easy as installing a license plate. Have a pair of 6" Hella driving lights on it and is solid. Definitely recommended for anyone looking for an inexpensive way to mount aux lights to your vehicle.

3.0 out of 5 stars
By Steve Marshall - Reviewed in the United States on June 29, 2017
Meh....
Item is just "ok". Its light weight, not designed to hold heavy lighting. Also, my car which it is supposed to fit, had no metal behind the plastic bumper cover so it will not simply attach via nuts and bolts like they would have you believe. Paint finish is very delicate. It will look terrible is just a few weeks of bug guts, rocks, road salt and debris. For its purpose, its ok. Don't plan for this to save your bumper in a crash.