Superpunch Cutaway Embroidery Stabilizer, 3.0 oz, Black, 12 in x 10 yd

Embroidery supplies since 1996. Commercial rolls for shops that stitch every day, not sample packs that run out mid-job. SuperPunch has supplied machine embroiderers since 1996. SuperStable stabilizers are made in the USA and sold the way a shop buys them: 100 and 110 yard commercial rolls, full width, one grade throughout. SuperB thread and bobbins follow the same rule. 40wt trilobal polyester, low lint, 175 shades in stock. Cutaway, tearaway, no-show mesh, wash-away, topping. If you stitch for a living you should not be reordering backing every two weeks. Because a shop running daily gets through sample packs fast. Full rolls cost less per yard and you stop reordering. Yes. SuperStable cutaway, tearaway and mesh are made in the USA. No-show mesh under polos and performance wear, cutaway under anything that stretches. A very popular light cut away for home embroiders. A premium grade "wet laid" dense, soft, drapable non directional, non woven cut away. This item contains lubricants to promote needle glide. Made of Polyester and Cellulose. Can be used on thicker garments such as fleece, polar, wool with densed embroidery up to 10,000 stitches. If you need more stability, please use 3.0 oz. Available in different sizes: - 12" x 10 yards roll (White) - 15" x 25 yards roll (White) - 15" x 100 yards roll (White) - 7.5" x 8" 100 pre-cut sheet (White) The most versatile black stabilizer on the market. A wet laid dense non directional, non woven cut away. This item contains lubricants to promote needle glide. Made of Polyester and Cellulose. Can be used on thicker garments such as fleece, polar, wool with densed embroidery up to 20,000 stitches. Available in different sizes: - 8" x 20 yards roll (White) - 12" x 10 yards roll (Black) - 15" x 25 yards roll (Black) The most popular cut away for commercial embroidery now made available to you in small rolls. This high quality backing is a non directional, very dense, soft and drapable and wet laid. Made of Cellulose and Polyester. There is a silicone so it will even lubrify your needle as you embroider. One layer should suffice the highest of stitch counts, up to 50,000. Use on all types of fabrics from the thinest to the softest, it will provide the best stability on the market today. Ideal for jacket backs. Available in different sizes: - 12" x 10 yards roll (White/Black) - 15" x 25 yards roll (White/Black) Cut & place the stabilizer under the fabric. Do embroidery on the desired place. Cut away the excess stabilizer from the fabric and then trimmed close to the stitches. Lightweight helps retain your design's shape even after repeated washing. Tear away stabilizers are used when you wish to remove most of the excess stabilizer from the back of the project after embroidery. It was recommended to be used on woven fabrics that have no stretch like quilted fabrics, 100 percent cotton, poly cotton fabrics, linen, vinyl, leather… If your project requires no traces of the stabilizer to be left after embroidery, you must use a wash away stabilizer. The strength of support offered by a wash away stabilizer is significantly less than cut away or tear away stabilizers. Wash away embroidery stabilizer is recommended for lightweight fabric and Free Standing Lace. Fusible Iron On stabilizer has a side with shiny coating which can be ironed to the wrong side to the fabric, so it can be fix to the fabric without a hoop. Using Fusible Iron On stabilizer will prevent stretching of the fabric during the hooping process. No Show Mesh is also a kind of cutaway embroidery stabilizer which will remain forever fixed to your fabric but it is sheer and semi-transparent which is not for very heavy design. It is extremely soft for baby garment and some fabric when soft is a very important consideration.