Search  for anything...
AstroAI

AstroAI Digital Multimeter and Analyzer TRMS 6000 Counts Volt Meter Ohmmeter Auto-Ranging Tester; Accurately Measures Voltage Current Resistance Diodes Continuity Duty-Cycle Capacitance Temperature

    • Based on 17,189 reviews
Condition: New
Checking for product changes
$35.99 Why this price?
Save $7.00 was $42.99

Buy Now, Pay Later

As low as $8 / mo
  • – 4-month term
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Affirm, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Free shipping on this product

Eligible for Return, Refund or Replacement within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: Only 6 left in stock, order soon!
Fulfilled by Amazon
Arrives Wednesday, May 22
Order within 7 hours and 10 minutes
Available payment plans shown during checkout

Features

  • Versatile Digital Multimeter - Accurately measures AC/DC Current, AC/DC Voltage, Capacitance, Frequency, Duty Cycle, Resistance, Diode, Continuity and Temperature.
  • Thoughtful Design - Support Data Hold, Large LCD Backlit Screen, Auto Shut-off and Hanging Magnet, and Kickstand make the process of measurements easier. Professional level is reflected in some features include Auto-Ranging capability, and True RMS for measuring both AC Current and Voltage.
  • Suitable For Many Occasions - This Multimeter is a golden partner to help to troubleshoot a variety of automotive and household electrical problems safely and accurately.
  • Ensure Safety - Double ceramic fuse is anti-burn and protects from overloading,and it will be more secure and reliable; F400mA/600V and F10A/600V explosion-proof ceramic fuse tubes can protect the multimeter effectively.
  • Additional Tips - Please take off the cap before using the test leads.

Brand: AstroAI


Power Source: Battery Powered


Style: Professional,Safety


Color: Red


Item Dimensions LxWxH: 8.66 x 2.28 x 6.69 inches


Brand: ‎AstroAI


Power Source: ‎Battery Powered


Style: ‎Professional,Safety


Color: ‎Red


Item Dimensions LxWxH: ‎8.66 x 2.28 x 6.69 inches


Lower Temperature Rating: ‎40 Degrees Celsius


Measurement Type: ‎Ohmmeter, Multimeter


Manufacturer: ‎AstroAI


Part Number: ‎ASIMT5000A-JP1


Item Weight: ‎1.26 pounds


Product Dimensions: ‎8.66 x 2.28 x 6.69 inches


Item model number: ‎


Batteries: ‎1 Lithium Metal batteries required. (included)


Is Discontinued By Manufacturer: ‎No


Shape: ‎Square


Item Package Quantity: ‎1


Number Of Pieces: ‎1


Display Style: ‎LCD


Included Components: ‎【1 x AstroAI 6000 Counts Multimeter , 1 x 9V 6F22 Battery, 1 x Pair of Test Leads, 1 x Multi-Function Socket, 1 x User Manual 】


Batteries Included?: ‎Yes


Batteries Required?: ‎No


Battery Cell Type: ‎Zinc Carbon


Date First Available: July 5, 2017


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Wednesday, May 22

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Affirm Pay in 4
  • Affirm Financing
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Good Tool for the Price
Color: Red
So far, I have only used the multimeter a few times for basic tasks, but it has performed well. I would say it's a good choice for hobby and DIY use, which is what I bought it for. Readings match my other meters and component specifications, so the accuracy seems to be good. The continuity beep sounds quickly, which is useful when looking for connections on a circuit board. It has several functions that I would not expect in a meter in this price range. It even has a K-type thermocouple for measuring temperature and an adapter for testing transistors. (I have not used either of those functions, yet.) I also like that both amperage inputs are protected by fuses that are easily accessible and clipped it. They should be easy to change, should I ever have one blow. The only negatives so far are, that the instructions do not say how to change the battery, so I had to find a video on YouTube that showed the procedure, and the overall feel of the meter is plasticy and flimsy, but it's no worse than I would expect at this price point. ... show more
Reviewed in the United States on December 11, 2023 by JA
    • Great value for the price
Color: Red
I am an electronic engineering student and this Multimeter is without a doubt one of the best tools I could buy. Its measurement accuracy is quite good, it is easy to use and is undoubtedly very useful for carrying out different electronics projects. It is light and easy to transport, it consumes very little battery, I have been using it for a couple of months and it has not been necessary to change it. 100% recommended for students and jobs that do not require great sensitivity or exhaustive precision. ... show more
Reviewed in the United States on March 17, 2024 by Diego Cabrera
    • A couple of minor kinks, but overall an excellent multimeter
Color: Red
I ordered this for one reason only. To trace what appeared to be a parasitic drain in my Jeep. I felt pretty stupid when I was done. The meter worked to perfection. I set it to DC voltage (Capital V with a line next to it with three dots under that) so I could measure millivolts (mV). Prior to testing I made sure I had not started the Jeep, opened doors or in any way done anything that might cause even a temporary power drain. I opened the fuse box in the engine compartment and started touching the meter probes to the tiny metal spots exposed on top of each fuse. Some showed 0.0 mV. Some showed a value around 0.3 mV and then went down to 0.0 mV. Normal so far. Woah! This one is sticking at 10.5 mV. Not good. What is that fuse for? Power outlet. Uh oh. My Jeep has two power outlets. One switched and the other unswitched or on all the time even if the key is off. It’s winter. I have a heated pad on the drivers seat. I thought I had it in the switched outlet. Had it in the unswitched. Unplugged the heat pad. Test the fuse again. 0.0 mV. Stupid is is stupid does. This meter has some good weight to it so it doesn’t feel cheap. I’m not sure about the magnets. They are two disk shaped magnets woven inside the short strap that hangs from the top of the meter. There is an indentation in the back of the meter made specifically for the magnets to stick to, but they still tend to slide around. If you use them to hang the meter from something metal they will do the job, but if you should bump the meter or yank the leads then the meter is coming off and going to the ground. Being unsteady on my feet and too often losing my balance I’m a prime candidate for this scenario. The magnetic strap is a nice thought, but I find it to kind of be in the way and it tends to interfere with the weak grip of my hands making it more likely that I will drop the unit. I don’t need it. I’ll probably just remove the strap with the magnets. I didn’t try the kick stand as I was outside working on the Jeep. Not good in that scenario. It might be good if your working at a table or workbench. I would probably reach for it with my unsteady hands and knock it over. The leads seem to be good quality and are plenty flexible. They are three feet long not counting the banana plugs or the probes. I would like to have seen a pair of alligator clips included in the package. I tried the thermocouple by touching it to the electric stove for a couple of seconds and the temperature shot straight up. I did it quick so as not to damage it but then read that it can go up to two thousand degrees. I’m not sure what I might use this feature for. Maybe check my soldering iron to see if it’s really as hot as it says it is. I like that it takes – and comes with – a standard nine volt lithium battery. No hunting for some strange battery you have to order online. I avoid anything that uses alkaline button batteries. Some say there is storage in back for the probes. The only storage I found was for the battery and fuses for which the cover is screwed closed. Matters not as I’m ordering a case. The back light for the screen is very bright, but it only stays on for ten seconds and there is no way to increase that or make it stay on permanently. If you’re working in a dimly lit area it could be a problem. I was outside at dusk when I was testing my fuses and I had to keep pressing the light button so I could clearly see the screen. I’m sure this is to keep it from sucking up the battery, but it can be inconvenient. At least the screen is huge with huge digits. It would be nice if this came with a case. I would have paid a little more to get that and the above mentioned alligator clips. I’m ordering some clips and a case separately. I’m older and my eyesight is not what it once was so I would like the instructions – which are very basic – to have been printed with larger text. I downloaded the online manual. https://images-na.ssl-images-amazon.com/images/I/812ObWAnIxL.pdf It’s got the exact same information, but it is readable. A couple of times during my testing the meter blurted out a series of quick beeps. I didn’t have the leads touching anything at that moment but I was testing fuse after fuse touching them with the probes so what was up? I pressed the light button and the screen didn’t show anything unusual. Nothing in the manual mentions these beeps. However, per the manual the meter automatically shuts off in fifteen minutes if it detects no activity. Perhaps the beeps were a warning telling me the meter is about to power down. I turned the meter on and started a stop watch. At fourteen minutes I got the beeps. A minute later it powered down. Theory proven. Unfortunately, touching the leads to things apparently does not count as activity. Activity is apparently defined by pressing a button or turning the dial. So, if you hear those beeps you need to reach over and tap the ‘light’ button or else the meter will shut down and you will have to turn it back on. No doubt this is another battery saving feature, but if you’re doing a lot of the same type of testing without having to change anything on the meter then you are required to keep letting the meter know you are still working. I understand the purpose, but I don’t like the feature. It should recognize that the leads are being used. I understand they use to come in yellow. Mine is red. I like red. I would like to have the option of keeping the LCD screen back light on or at least on longer and I would like to have the option of disabling the fifteen minute auto off feature. For the low price it sure feels high quality. Overall I am very satisfied with this multimeter. Small update: I removed that strap with the magnets. I found that every time I set it down on a metal surface it was sticking. The first time it happened I nearly lost my grip on the meter. I got tired of picking the meter up and having to give it an extra little yank to pull the magnets free. Although they stick to the back of the meter, when I set the meter down on the hood or the bumper they got a better grip on those or what ever other metal surface I had set the meter down on. Better to remove them completely than to risk getting the meter yanked out of my weak feeble old hands. No doubt the magnets in the strap is a useful feature for some people, but for me it turned out to be more of a handicap and introduced the risk of me picking up the meter and dropping it. I don't think I would ever stick those magnets to something and let the meter dangle precariously by the strap anyway. The magnets were a nice thought, but they don't work for me. Update: I've had it nearly a year. I've found more use for this meter than I ever thought I would. It has functioned flawlessly except that it has developed some kind of loose connection for the LCD screen. I have to push down on the top center of the screen for the information on the screen to show up. To fix this I had to wedge a little sliver of something under the edge of the casing at the top of the screen. Other than that I am very happy with this meter. I don't know why it developed this issue as it has never been dropped or banged on anything. I'm still happy enough that I still rate four stars. ... show more
Reviewed in the United States on December 12, 2018 by West Texas
    • Will update if I run into issues. Great so far.
Color: Red
Has everything that I need. It works. Nice big screen. Accurate. Well made. If you want more you have to spend more. Easy as that. This works great for what it is.
Reviewed in the United States on March 29, 2024 by 07Pub
    • Great product!
Color: Red
This unit has all of the features that I needed in a V.O.M. Easy to use, lots of features and I found the Temperature feature useful. Also the price was great!
Reviewed in the United States on January 19, 2024 by Philippe
    • Reasonable pick for hobbyists
Color: Red
Purchased this multimeter as a hobbyist in electronics. No fancy lab gear to compare, but for my purposes, it's been quite accurate. A bit bulky, yet manageable. Blew a fuse once, a bit of a pain given the cost and effort to replace (it's not a common combination of size and values). Kudos to AstroAI, though – they sent spares later at no cost, now stored for emergencies. The real test came with a negative ion generator experiment. Pushed it past its 600V limit (not the wisest move on my part) and, well, it didn't survive the ordeal. Not the device's fault – it's clear against exceeding 600V. It was reading in the 1500V range on the screen when it gave out. Bought the same model again. Why? It's affordable, and I'm not worried about damaging it during learning and experiments. Plus, I liked it. Screen refresh and continuity response are quick, more so than I need. Probes are basic, nothing fancy, but they do the job. In short, a decent tool for hobbyist use, just be mindful of its limits. No grand claims here, just a straightforward experience. ... show more
Reviewed in the United States on November 27, 2023 by W. O.
    • Simple and functional
Color: Red
Replaced my old Craftsman unit with this one, no complaints. Simple to use, has a handy magnet to hang it from your hood when chasing down electrical issues.
Reviewed in the United States on March 29, 2024 by Norris Creek
    • Works well and does what it's supposed to do.
Color: Red
It works well, is easy to use, and does what it's supposed to do. A good meter for the price.
Reviewed in the United States on February 9, 2024 by Mikie

Can't find a product?

Find it on Amazon first, then paste the link below.