5/8" Reamer Bit for Steel Metal,5/8" Bridge Construction Reamer Drill Bit

Features

• The bridge reamer bit is also called construction reamers,the 5/8" reamer drill bit for metal aligns and enlarges an existing/pre-drilled holes to 5/8 inch before bolt or rivet installation.
• Our 5/8" reamer bit for metal is crafted with M2 high-speed steel to ensure cutting materials smoothly,high performance in the garage /jeep/ weekend repair / existing hole alignment.
• Widely uses in bridge,construction,steel erection,automotive truck trailer maintenance repair,woodworking and metalworking projects,Jeep/Pitman arm adjustment,garage repair.
• Accurate Reamer Alignment:The tapered point of 5/8 inch reamer drill bit permits the reamer bit to entry into the predrilled holes of out-of-line, allows for efficient and accurate reaming.
• Safe and Better Chuck Grip: Our 5/8 reamer bit for steel with 1/2 inch round shank with 3-flat,ensure frimly grip in the chuck,reduce slipping in portable electric or pneumatic tools,prolong the tool's lifespan.
• The 5/8" conduit reamer is NOT twist drill bit for starting solid material.Only for existing hole enlargement, aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a existing hole or a pilot hole that is smaller than 5/8",then using our 5/8" reamer bit to ream out to 5/8".
• Our 5/8 inch reamer bit for metal, steel,alloy aluminum,plastic,iron,nickel,wood,cast iron etc.But first apply some cutting oil,use low speed then gradually increase speed, clamp the workpiece,, and maintain steady pressure for cleaner cuts and longer edge life.Reduce speed before the work is nearly completed.
• Drill-Speed Control:Start with lower speed when entering the predrilled hole to ensure precise alignment;Gradually increase speed once the bit is engaged in the hole;Reduce speed as you approach the desired hole size to ensure a smooth, precise finish
• Use Step: 1.Start with a pilot hole; 2. Apply cutting oil helps the reamer cut smoothly and prevents overheating; 3. Ream Slow & Steady. Not for drilling solid metal from zero.

Description

5/8" Drill Bridge/Construction Reamer with 1/2" Shank Chuck Specification: Length:6-3/8" Item Diameter:5/8" Cutting Length:4-1/2" Cutting Diameter:0.63" Cutting Direction:right-hand Material:High-Speed Steel (HSS） Shank Diameter:1/2" HSS 5/8" Bridge/Construction Reamer,enlarge and align existing holes for Steel,Metal, Alloy, Aluminum, Wood etc Reaming with a magnetic drilling machine. Mounted to an impact drill for faster results. Point is tapered to permit entry into overlapping holes. Made more easily work of steering knuckles and pitman arm. It used for aligning an existing hole and enlarging undersized hole. Aligns and enlarges pre-drilled holes ready for bolting,make the bolt holes line up. Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. The bit is used to expand a hole to 5/8". At first there must be a 1/2”,1/4”,1/8”,3/8”,3/16”,5/16”,7/16”,9/16”,5/32”,7/32”,9/32”,11/32”,13/32”,15/32”pre-drilled hole,then ream out to 5/8". Warm Tips:Pls kindly put some cutting oil before you use the construction reamer.

Material: Alloy Steel, Brass, High Speed Steel (HSS)

Cutting Diameter: 0.63 inches

Finish Type: Nickel

Shank Type: 3-Flat

Cutting Angle String: 6E+1 degrees

Brand Name: NOVINO

Model: HSS-5/8-Tapered-Reamer-Bit

Item Highlight: For Steel Metal Alloy Wood Plastic,M2 HSS Taper Chucking,1/2" Non-Slip Shank Chuck,Align or Enlarge Hole, 5-Spiral Flutes

Unit Count: 1 Count

Number of Packs: 1

Manufacturer: NOVINO

Part Number: NOV-019

Number of Pieces: 1

Cutting Diameter: 0.63 inches

Minimum Bore Diameter: 0.63 inches

Material Type: Alloy Steel, Brass, High Speed Steel (HSS)

Finish Types: Nickel

Shank Type: 3-Flat

Surface Recommendation: Metal,Steel,Wood

Cutting Angle String: 6E+1 degrees

Tool Flute Type: Straight

Point Style: Taper Point

Number of Flutes: 3