Search  for anything...
Siglent

Siglent Technologies SDS1202X-E 200 mhz Digital Oscilloscope 2 Channels, Grey

    • Based on 1,327 reviews
Condition: New
Checking for product changes
$347.00 Why this price?
Save $32.00 was $379.00

Buy Now, Pay Later

As low as / mo
  • – Up to 36-month term with PayTomorrow
  • – No impact on credit
  • – Instant approval decision
  • – Secure and straightforward checkout

Ready to go? Add this product to your cart and select a plan during checkout. Payment plans are offered through our trusted finance partners Klarna, PayTomorrow, Apple Pay, and PayPal. No-credit-needed leasing options through Acima may also be available at checkout.

Learn more about financing & leasing here.

Selected Option

Free shipping on this product

Eligible for Return, Refund or Replacement within 30 days of receipt

To qualify for a full refund, items must be returned in their original, unused condition. If an item is returned in a used, damaged, or materially different state, you may be granted a partial refund.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

Availability: In Stock.
Fulfilled by Amazon
Arrives Monday, Apr 29
Order within 10 hours and 8 minutes
Available payment plans shown during checkout

Style: Oscilloscope


Features

  • Country of origin : China
  • Real-time sampling rate up to 1 gsa/use
  • IRecord length up to 14 Mpts
  • Standard serial bus triggering and decode, supports iic, spi, uart, Rs232, can, and lin

Description

200Mhz, 1Gsa/s, The SDS1202X-E Series employs a new generation of Spo technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry. It has a minimum vertical input range of 500 UV/Div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400, 000 frames/sec (sequence mode). it also employs a 256-level intensity Grading display function and a color temperature display mode not found in other models in this Class. Siglent’s new oscilloscopes offering supports multiple powerful triggering modes including serial bus triggering. Decoding is standard configuration including IIC, SPI, UART, can, LIN. History waveform recording and sequential triggering enable extended waveform recording and analysis. Another powerful addition is the new 1M points FFT math function that gives the sds1000x-e very high frequency resolution when observing signal Spectra. The new design also includes a hardware co-processor that delivers measurements quickly and accurately. The features and high performance of the sds1000x-e Series cannot be matched else anywhere at this price.

Is Discontinued By Manufacturer ‏ : ‎ No


Product Dimensions ‏ : ‎ 10 x 15 x 17 inches; 5.51 Pounds


Item model number ‏ : ‎ SDS1202X-E


Date First Available ‏ : ‎ April 19, 2017


Manufacturer ‏ : ‎ Siglent Technologies


Country of Origin ‏ : ‎ China


Best Sellers Rank: #15,506 in Industrial & Scientific (See Top 100 in Industrial & Scientific) #4 in Lab Oscilloscopes


#4 in Lab Oscilloscopes:


Customer Reviews: 4.7 4.7 out of 5 stars 1,327 ratings


Frequently asked questions

If you place your order now, the estimated arrival date for this product is: Monday, Apr 29

Yes, absolutely! You may return this product for a full refund within 30 days of receiving it.

To initiate a return, please visit our Returns Center.

View our full returns policy here.

  • Klarna Financing
  • Klarna Pay in 4
  • PayTomorrow Financing
  • Apple Pay Later
Leasing options through Acima may also be available during checkout.

Learn more about financing & leasing here.

Similar Products

Top Amazon Reviews

    • Very nice
Style: Oscilloscope
My old scope was a Tektronic 7633 that I love. This 1202 blows it away. It is intuitive to operate and has almost all the features of the 7633 plus adds a lot more. The auto set up feature saves a lot of time. The trigger features work great. The probes that come with the scope are good quality 1x/10x probes. The only thing I find annoying is that buttons have different function in different modes and some things I tend to use often are hard to activate. In general it is well made with a solid case. It is an excellent unit and well worth the money. ... show more
Reviewed in the United States on August 31, 2023 by Richard Quaif
    • Excellent Scope at an excellent price
Style: Oscilloscope
The other reviews mention many great features ranging from the 1GSPS, 200MHz bandwidth, FFT, and range V/div starting at 0.5mV. So i won't repeat these for the Siglent SDS1202X-E that I purchase on July 31, 2021. This is an excellent scope for the price. Don't let people mislead you into thinking that it's only for beginners (it's not) but certainly beginners will be able to use it. Compared with my HP54111d from the 1990s costing $20k when new and having 500MHz Bandwidth and 2Gsps, the little Siglent does far more and better for far less price (but only 1Gsps and 200MHz bandwidth). Others mention concern over the serial numbers and the 'droop' related to probe calibration. My serial number is not the BA. However, I will mention that the 'quick start guide' accompanying the unit had an addendum page regarding calibration that indicated the unit was calibrated several years ago which appears to indicate the unit left the factor at that time. So the BA serial numbers must have been fixed by then. Other people have mentioned concern over high levels of noise on the 0.5 mV through 5 mV ... actually not a problem. But here's my story. When I first started the unit on Monday around 4pm, I shorted the probe tip to its ground and noted wildly varying 'noise' on the 0.5mV - 2mV scale and that would make the scale useless. I removed the probe and instead attached a banana-to-coax adapter and shorted the two inputs with a wire. Whoa still wildly varying noise. Bringing my hand closer to it increased the noise by a factor of two. I began to think there was a problem with scopes ground circuitry to the BNC and some how the noise was coupling through the ground in some type of common mode problem. The FFT showed a spike at the frequency of the FM station down the road at 98.3 ... very cool. Decided to wait till the next day (Tuesday morning) for further tests. The environmental noise levels had dropped by Tuesday morning ... an interesting fact in its own right but still enough for testing. This time, a 50 Ohm cap was placed on the SDS1202X-E input BNC and also placed a 50 Ohm cap on the BNC of my old HP54111D (2GSPS, 500MHz bandwidth). Comparing the two showed similar noise in both on the 1mV scales - here the noise refers to the 'thickness' of the baselines and both were well below 0.5 mV. As a matter of fact the HP unit has dying internal boards that produce a baseline that wavers over about 0.5 mV. With the caps on the Siglent unit, moving the hand closer the 50 Ohm Cap does not result in the wildly varying noise levels. However touching the ground on the cap does result in the scope picking up a small periodic spike maybe 0.25 mV. I'll need to investigate the probes more closely since grounding the tip does not appear to eliminate the nose very well. Anyway, the scope does not appear to have an internal noise problem contrary to some reports. Finally, I wish the power cord could be attached at the back rather than the side of the unit since that uses valuable shelf space or maybe provide a right angle connector for the power cord. Oh and be sure to download the full manual from either the sellers website or the manufacturers website since the unit only comes with the quick start guide. ... show more
Reviewed in the United States on August 3, 2021 by MAParker
    • Amazing functionality for price
Style: Oscilloscope
The features in all of these scopes these days for the price is amazing. This one is from a bit better brand name than some of the Chinese brands I was considering in the 200MHz 1G/s but it also has some additional features: 1) Color intensity of histogram of trace 2) Serial Decode (this is pretty amazing what you can do with I2C or SBUS coming from Arduino or Raspberry Pi or many other lab equipment RS232/485). Overall, I was able to quickly get access to most signals and features within 10 minutes of playing with it and finding very good options. Fairly intuitive (press to reset to zero on many knobs is nice). There are some *very* good "statistics" that you can display real time and show and the cursors function shows period/freq as well as voltage delta in great detail. I am not sure why I can see the A/C trigger level as a "label" on the screen, but it shows up in DC trigger mode. I'm sure I'm doing something wrong on settings. Really like this purchase so far. Got some good ripple measurements from my DC power source and got great detail/functions. I'm eager to look at the FFT operations to even use as a very rudimentary analyzer for FM modulated signals too. ... show more
Reviewed in the United States on May 6, 2020 by Jeff McClain
    • Probing questions
Style: Oscilloscope
Item was received on time, well boxed, functioned without problems. It will indeed display 200+ MHz signals. I have a "hobby repair shop" and got the scope about a year ago, during which time I have used it for a wide array of audio, digital, and radio testing. For troubleshooting, a digital scope is great, because on the "measure" function it will tell you more about a point in a circuit than any other tool I can name. After a year, everything still seems functional, and it is certainly a lot of scope for the money. Of course, after (ahem) quite a few years of using oscilloscopes, I am still somewhat used to the old analog variety. People in my position might want to be aware that there are differences, a learning curve, and a few shortcomings to a digital scope. They have many buttons, menus, and options to deal with and it sometimes seems excessive for what you are trying to do. One of my pet peeves is that you can't "fine tune" the horizontal frequency as you did on the old scopes, it goes in steps that always seem a little too high or low. That's not a defect, just a feature of digital. But, coupled with the sort of...meh...triggering, some analog signals can be hard to lock in and you often have to settle for a jumpy display. This can even happen on a simple sine wave, not just complex signals. I don't expect perfection for under $400, but the fact is that it doesn't trigger as well as the old Tek 453 I paid $50 for, made in the early 70s. Otherwise, of course, it outperforms the heck out of it. So, overall I'm pretty happy with the performance, and it's a good bang for the buck. The supplied probes, however, I'm not happy with at all. They will pass 200 MHz but are cheap junk, and mine arrived without the "clip hooks" that allow you to leave them attached to a circuit. If they were left out by mistake, it's bad QC. If they were left out to save money, they are cheapskates. I probably should have complained about it early on. My advice is, plan to get a pair of decent probes with all the accessories to get maximum benefit from this scope. ... show more
Reviewed in the United States on February 20, 2021 by Milburn Stone
    • Good osilloscope especially for the price
Style: Oscilloscope
Good osilloscope especially for the price
Reviewed in the United States on April 11, 2024 by BillKnox

Can't find a product?

Find it on Amazon first, then paste the link below.