That product is currently unavailable. Please try a different product or see this article for help.
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam

Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam

Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
Auxbeam S1 Series H4 LED Headlights Fanless with 2 Pcs of Super Bright CSP LED Headlight Conversion Kit 50W Lumens 6000K Halogen Replacement Hi-Lo Beam
$39.59 Why this price?
Checking for changes Product info up-to-date Product info updated We've detected that this product is out of stock. Enter your email below and we will notify you when it is available.
Buy Now, Pay Later
4 equal payments of $
- Zero interest
- No credit check
- Quick & easy checkout

Free shipping on this product


Availability: In Stock
Fulfilled by Amazon

Features

  • Super Power: H4 led headlight bulbs with 2pcs 6000K high power CSP LED chips. 360 degree clear beam no blind zone. 50W/ set (35W/bulb), 8000lm (4000lm each bulb)
  • Fanless Design: Advanced cooling system bring the most stable heat dissipation, without noise,more quieter. Receive a better and smooth radio signal. More smarter. Plug and play,no need modify circuit,easy installation
  • Good Light Pattern: Reproduce the same focal distance as the halogen lamp. Without any dark spots or foggy light. Bring you more focusing and brighten lighting effect.Safer night driving.DOT in line with legal street driving
  • IP68 Waterproof and Dust Seal: 2x H4 LED headlight bulbs when working under temperature -40℃~+150℃ degree Celsius for a 30,000 hours life time, and with rubber ring seals, shock resistant, the only moving part works underwater, cooling lasts even in harsh conditions. Auxbeam S1 H4 LED headlight bulbs conversion kits to offer you a clear view sight and feel safety, you can use it freely in heavy rain
  • Warranty: We offer two year warranty. If you have any questions, please feel free to contact us. WARM TIP: Before purchase Auxbeam H4 led headlights, please check the correct plug size of your car. And check the headlight size of vehicle to ensure headlight has enough space for installation (refer to our product size image)

Description

Auxbeam LED Headlight Bulbs NF-S1 Series LED Headlights with 2 Pcs of H4 Bulb Auxbeam NF-S1 series plug size H4 led headlights, with high brightness CSP LED chips---high optical density & low heat resistance, enhance light efficiency up to 95% Fan-less design without ballast, no noise caused by fan. Spread soft white light on road evenly without dark spot/foggy light, will not dazzle on-coming traffic. 6000K white light show all weather road situation clearly without glare. Advanced heat conduction system+unique grooved heat sink fins keep the light bulb in appropriate working temperature. Constant current instant start up, no circuit interference and electromagnetic radiation. 12pcs*high power CSP LED chips Working Voltage is DC 9-32V (fit 12V/24V vehicle) and Luminous Flux is approx. 8000lm/set and 6000K Color Temperature. Working Temperature is under -40-80 degree Celsius. Material with aviation 6063 aluminum profile offer fast and effective heat sink, bring perfect performance when you driving cross darkness. H4 LED headlights with 8000lm@ low beam, 8000lm@high beam (2pcs/set) (2pcs/set)H4 LED headlight conversion kit with extremely bright CSP LED chips from world-leading brand, excellent beam intensity without black spot. Application for headlight, fog light, led headlight bulbs, H4 led headlight bulbs, replace for Halogen, HID Headlights. 6000K White Color with 8000lm low beam and 8000lm high beam (2pcs/set) increase a high and clear performance while you driving across darkness. Fully co-work with reflector, 360 degree beam increases 30% effective range than other LED light bulb. Superior optic control on road for optimal beam pattern to see the road condition clearly 0.1S quick start, allow a great distance for you to see and be seen in all weather conditions. Quick cooling Advanced heat conduction system+unique grooved heat sink fins keep the light bulb in appropriate working temperature. No fan design without noise. IP65 Water proof and dust seal 2x H4 LED headlight bulbs when working under temperature -40℃~+80℃ degree Celsius for a 30,000 hours life time, and with rubber ring seals, shock resistant. Easy Installation Plug and play integrated design, please check the plug type of your headlight on your vehicle, whether your vehicle requires a set of warning canceller to prevent on-dash errors.


Brand Auxbeam


Item Weight 13.6 ounces


Package Dimensions 5.2 x 4.8 x 3 inches


Item model number 13


Manufacturer Part Number AB567Y


Folding No


ASIN B074GZ3S4P


Customer Reviews 4.3 out of 5 stars 260 ratings 4.3 out of 5 stars


Best Sellers Rank #10,009 in Automotive (See Top 100 in Automotive) #59 in Headlight & Taillight Conversion Kits


Shipping Weight 13.6 ounces (View shipping rates and policies)


Date First Available August 1, 2017


Shipping

This product includes free shipping to all US addresses.


Delivery

Unless otherwise stated above, most products arrive within 2-3 business days. Larger items may take 6-9 business days. Tracking information will be automatically provided as soon as your order ships.


View our full shipping policy here.

Returns

This product can be returned within 30 days of delivery for a full refund. Please visit our returns center to begin a return.

View our full returns policy here.

Features

  • Super Power: H4 led headlight bulbs with 2pcs 6000K high power CSP LED chips. 360 degree clear beam no blind zone. 50W/ set (35W/bulb), 8000lm (4000lm each bulb)
  • Fanless Design: Advanced cooling system bring the most stable heat dissipation, without noise,more quieter. Receive a better and smooth radio signal. More smarter. Plug and play,no need modify circuit,easy installation
  • Good Light Pattern: Reproduce the same focal distance as the halogen lamp. Without any dark spots or foggy light. Bring you more focusing and brighten lighting effect.Safer night driving.DOT in line with legal street driving
  • IP68 Waterproof and Dust Seal: 2x H4 LED headlight bulbs when working under temperature -40℃~+150℃ degree Celsius for a 30,000 hours life time, and with rubber ring seals, shock resistant, the only moving part works underwater, cooling lasts even in harsh conditions. Auxbeam S1 H4 LED headlight bulbs conversion kits to offer you a clear view sight and feel safety, you can use it freely in heavy rain
  • Warranty: We offer two year warranty. If you have any questions, please feel free to contact us. WARM TIP: Before purchase Auxbeam H4 led headlights, please check the correct plug size of your car. And check the headlight size of vehicle to ensure headlight has enough space for installation (refer to our product size image)

Description

Auxbeam LED Headlight Bulbs NF-S1 Series LED Headlights with 2 Pcs of H4 Bulb Auxbeam NF-S1 series plug size H4 led headlights, with high brightness CSP LED chips---high optical density & low heat resistance, enhance light efficiency up to 95% Fan-less design without ballast, no noise caused by fan. Spread soft white light on road evenly without dark spot/foggy light, will not dazzle on-coming traffic. 6000K white light show all weather road situation clearly without glare. Advanced heat conduction system+unique grooved heat sink fins keep the light bulb in appropriate working temperature. Constant current instant start up, no circuit interference and electromagnetic radiation. 12pcs*high power CSP LED chips Working Voltage is DC 9-32V (fit 12V/24V vehicle) and Luminous Flux is approx. 8000lm/set and 6000K Color Temperature. Working Temperature is under -40-80 degree Celsius. Material with aviation 6063 aluminum profile offer fast and effective heat sink, bring perfect performance when you driving cross darkness. H4 LED headlights with 8000lm@ low beam, 8000lm@high beam (2pcs/set) (2pcs/set)H4 LED headlight conversion kit with extremely bright CSP LED chips from world-leading brand, excellent beam intensity without black spot. Application for headlight, fog light, led headlight bulbs, H4 led headlight bulbs, replace for Halogen, HID Headlights. 6000K White Color with 8000lm low beam and 8000lm high beam (2pcs/set) increase a high and clear performance while you driving across darkness. Fully co-work with reflector, 360 degree beam increases 30% effective range than other LED light bulb. Superior optic control on road for optimal beam pattern to see the road condition clearly 0.1S quick start, allow a great distance for you to see and be seen in all weather conditions. Quick cooling Advanced heat conduction system+unique grooved heat sink fins keep the light bulb in appropriate working temperature. No fan design without noise. IP65 Water proof and dust seal 2x H4 LED headlight bulbs when working under temperature -40℃~+80℃ degree Celsius for a 30,000 hours life time, and with rubber ring seals, shock resistant. Easy Installation Plug and play integrated design, please check the plug type of your headlight on your vehicle, whether your vehicle requires a set of warning canceller to prevent on-dash errors.


Brand Auxbeam


Item Weight 13.6 ounces


Package Dimensions 5.2 x 4.8 x 3 inches


Item model number 13


Manufacturer Part Number AB567Y


Folding No


ASIN B074GZ3S4P


Customer Reviews 4.3 out of 5 stars 260 ratings 4.3 out of 5 stars


Best Sellers Rank #10,009 in Automotive (See Top 100 in Automotive) #59 in Headlight & Taillight Conversion Kits


Shipping Weight 13.6 ounces (View shipping rates and policies)


Date First Available August 1, 2017


Shipping

This product includes free shipping to all US addresses.


Delivery

Unless otherwise stated above, most products arrive within 2-3 business days. Larger items may take 6-9 business days. Tracking information will be automatically provided as soon as your order ships.


View our full shipping policy here.

Returns

This product can be returned within 30 days of delivery for a full refund. Please visit our returns center to begin a return.

View our full returns policy here.

Features

  • Super Power: H4 led headlight bulbs with 2pcs 6000K high power CSP LED chips. 360 degree clear beam no blind zone. 50W/ set (35W/bulb), 8000lm (4000lm each bulb)
  • Fanless Design: Advanced cooling system bring the most stable heat dissipation, without noise,more quieter. Receive a better and smooth radio signal. More smarter. Plug and play,no need modify circuit,easy installation
  • Good Light Pattern: Reproduce the same focal distance as the halogen lamp. Without any dark spots or foggy light. Bring you more focusing and brighten lighting effect.Safer night driving.DOT in line with legal street driving
  • IP68 Waterproof and Dust Seal: 2x H4 LED headlight bulbs when working under temperature -40℃~+150℃ degree Celsius for a 30,000 hours life time, and with rubber ring seals, shock resistant, the only moving part works underwater, cooling lasts even in harsh conditions. Auxbeam S1 H4 LED headlight bulbs conversion kits to offer you a clear view sight and feel safety, you can use it freely in heavy rain
  • Warranty: We offer two year warranty. If you have any questions, please feel free to contact us. WARM TIP: Before purchase Auxbeam H4 led headlights, please check the correct plug size of your car. And check the headlight size of vehicle to ensure headlight has enough space for installation (refer to our product size image)

Description

Auxbeam LED Headlight Bulbs NF-S1 Series LED Headlights with 2 Pcs of H4 Bulb Auxbeam NF-S1 series plug size H4 led headlights, with high brightness CSP LED chips---high optical density & low heat resistance, enhance light efficiency up to 95% Fan-less design without ballast, no noise caused by fan. Spread soft white light on road evenly without dark spot/foggy light, will not dazzle on-coming traffic. 6000K white light show all weather road situation clearly without glare. Advanced heat conduction system+unique grooved heat sink fins keep the light bulb in appropriate working temperature. Constant current instant start up, no circuit interference and electromagnetic radiation. 12pcs*high power CSP LED chips Working Voltage is DC 9-32V (fit 12V/24V vehicle) and Luminous Flux is approx. 8000lm/set and 6000K Color Temperature. Working Temperature is under -40-80 degree Celsius. Material with aviation 6063 aluminum profile offer fast and effective heat sink, bring perfect performance when you driving cross darkness. H4 LED headlights with 8000lm@ low beam, 8000lm@high beam (2pcs/set) (2pcs/set)H4 LED headlight conversion kit with extremely bright CSP LED chips from world-leading brand, excellent beam intensity without black spot. Application for headlight, fog light, led headlight bulbs, H4 led headlight bulbs, replace for Halogen, HID Headlights. 6000K White Color with 8000lm low beam and 8000lm high beam (2pcs/set) increase a high and clear performance while you driving across darkness. Fully co-work with reflector, 360 degree beam increases 30% effective range than other LED light bulb. Superior optic control on road for optimal beam pattern to see the road condition clearly 0.1S quick start, allow a great distance for you to see and be seen in all weather conditions. Quick cooling Advanced heat conduction system+unique grooved heat sink fins keep the light bulb in appropriate working temperature. No fan design without noise. IP65 Water proof and dust seal 2x H4 LED headlight bulbs when working under temperature -40℃~+80℃ degree Celsius for a 30,000 hours life time, and with rubber ring seals, shock resistant. Easy Installation Plug and play integrated design, please check the plug type of your headlight on your vehicle, whether your vehicle requires a set of warning canceller to prevent on-dash errors.


Brand Auxbeam


Item Weight 13.6 ounces


Package Dimensions 5.2 x 4.8 x 3 inches


Item model number 13


Manufacturer Part Number AB567Y


Folding No


ASIN B074GZ3S4P


Customer Reviews 4.3 out of 5 stars 260 ratings 4.3 out of 5 stars


Best Sellers Rank #10,009 in Automotive (See Top 100 in Automotive) #59 in Headlight & Taillight Conversion Kits


Shipping Weight 13.6 ounces (View shipping rates and policies)


Date First Available August 1, 2017


abunda_amazon_reviews These bulbs work great in my 2008 Toyota Tacoma. After installing them I properly aimed them so they wouldn't blind oncoming drivers. They work well in my stock Tacoma Headlights and have a decently clean cutoff. We'll have to see how well they hold up over time. Edit: Tacoma Owners! Don't forget to put them in correctly. If yours are spotty, it's because the bulb upside down. The Auxbeam logo on both sides should face the drivers side. Update: 2 years later and these bulbs are working great! Haven’t had any issues at all with them. I highly recommend these bulbs.;;Reviewed in the United States on October 16, 2017;;5.0 out of 5 stars;;Nice bright bulbs and easy install;;Joseph Damon L. Powers;;/gp/customer-reviews/REGNESSMRP0QE/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B074GZ3S4P;;;These were more difficult to install than I assumed; but, in the end, proved worth the extra effort in a 2nd generation 2006 Toyota Tacoma. These replaced halogen lamps. Because these LED lamps require more room for cooling fins, they are longer and require more space to line up and insert. I was forced to remove the battery on one side and windshield washer reservoir on the other. During that effort, I was questioning whether it was worth the effort. In the end, it was. These are brighter. Note: When reading the instructions, it is not clear...and this is only of interest someone while performing an installation...that the black plastic collar twists off (and must be clipped in place) to allow for the rubber weather seal...and only THEN insert the LED lamp.;;Reviewed in the United States on February 11, 2018;;5.0 out of 5 stars;;Longer than OEM requiring at least 4 cm space behind the fixture.;;FlyNavy;;/gp/customer-reviews/R2PVSL1COFEYYP/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B074GZ3S4P;;;If your vehicle does not have a factory fog lamp, this will work. BUT if your vehicle is equipped with a factory fog lamps this will disable your fog lamp function and the low beam and high beam does not differ very much so drivers will be flashing their light at you or they'll be flipping you, because the beam is not focused to the road. The tech support suggested that I buy their wire that is supposed to correct the led light, but it doesn't.;;Reviewed in the United States on July 10, 2018;;1.0 out of 5 stars;;Don't waste your time.;;Mildred A.;;/gp/customer-reviews/R227V8RBAU6U97/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B074GZ3S4P;;;I really wanted to like these Auxbeam LED NF-S1 H4 bulbs, but alas they didn't perform as well as the OEM halogen bulbs on my 2004 Toyota Tacoma. They were also a bit difficult to install using the OEM rubber headlight seals but after working at it for about a half hour I did get them done. There was some cutoff for the low beams but still quite a bit of light artifacts all over up higher and the majority of the light from the high beams didn't extend far enough down the road, just a bit farther than the low beams. Over all after installing and testing on a pitch black unlighted rural road they just didn't perform as well as the good ol' stock halogen bulbs. Sure the halogens are yellowish, but it's not all about modern bright white light. I reinstalled the OEM halogens and drove to the same road I tested these LEDs on and confirmed the OEMs really did a better job on my Tacoma. Maybe these would work better in a different headlight reflector, but not in my Tacoma reflector.;;Reviewed in the United States on August 7, 2019;;2.0 out of 5 stars;;Inadequate beam focus and brightness;;Jerry F;;/gp/customer-reviews/R265GTAB27KS50/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B074GZ3S4P;;;Absolutely fantastic. Older models of the Auxbeam LED headlight bulbs did not perform anywhere near this well. They were bright but the pattern was awful. These S1's are phenomenal at this price point. I have the H4 bulbs in my snowmobile and the pattern is nice and tight. I will finally be ordering some for my truck. They light up the trail much better than the stock xenons, are a nice color and do not blind oncoming traffic. Can't say enough how impressed I am. Pattern at 20 feet is almost identical to stock bulbs but brighter. Update: Ran them the rest of the winter and still in love with them. Cannot be beat at this kind of pricepoint.;;Reviewed in the United States on February 5, 2018;;5.0 out of 5 stars;;New S1 model leaps and bounds better than old;;Ben's Reviews;;/gp/customer-reviews/R13XXAHTFZDE50/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B074GZ3S4P;;;These bulbs work fantastic on H4 headlights. However, out of the box, the bulbs had the base installed upside down, so the little cutoff bowl pointed down instead of up. This made for a weird beam pattern that was poorly focused and was extremely blinding. Fortunately, the base can be twisted off and installed the correct way with ease with no tools. After flipping the base to its proper position, the low beams work great. Unfortunately, the left bulb is twisted a tiny bit because one of the pins that holds the base is deformed so it doesn't twist on all the way, because of this, the left beam is a bit odd and is higher than it should be. Despite this, the bulbs provide a good beam. The only real downside is that high beams are completely useless. The beam is not focused at all and doesn't illuminate very far. The color is fantastic; a mostly white light with a very, very slight hint of blue. They look great, and still illuminate properly, whereas cheaper bulbs have too much blue, so they look dim. Heat output-dissipation seems to be excellent, despite the lack of a fan. After about 10 minutes of run time, the heatsink was just a bit warm, whereas other LEDs i have tried get very hot after just a few minutes. Overall I am very satisfied, and I recommend this upgrade for any car. Light is far more pleasant, and despite the bad high-beams, these bulbs still perform better than halogens.;;Reviewed in the United States on February 5, 2020;;4.0 out of 5 stars;;Works well for the price. Be careful about bulb orientation!;;Manuel;;/gp/customer-reviews/R1UIBYK3ELSTLG/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B074GZ3S4P;;;The more I use these the better I like them. These are bright and very white (no blue or purple tint) making Road signs reflect very good using these LEDs, much farther away than any halogens. The light has a good spread and shows the road good on dim. Brights are good just not great. I returned Auxito LEDs which were terrible. The end of the bulbs rest against rubber dust boot. Will have to see if the heat melts the rubber boot. The following instructions are for a 2006-2014 Honda Ridgeline. 1. Remove the wiring plug from the current bulb. 2. Grasp both sides of the rubber boot and pull toward the rear of the vehicle to remove. 3. Press in and up to remove the spring clip toward the rear of the vehicle. 4. Pull the old bulb out. 5. Remove the plastic collar from the new LED and place into the light socket paying close attention to the correct orientation. 6. Install the spring clip on making sure the end of the spring clip is secured in the detent. 7. Install the rubber boot on the new LED, install in the light socket and turn 45 degrees clockwise. Make sure the hood on the LED is pointing up after installing. Press on the rubber boot until it is square on the headlight housing. 8. Attach the LED to the vehicle plug. 9. Test the bulb and repeat steps 1 through 8 for the opposite side.;;Reviewed in the United States on January 28, 2020;;5.0 out of 5 stars;;Best LEDs for less than $35;;Ydoc;;/gp/customer-reviews/R31IBQHWFILJ0M/ref=cm_cr_dp_d_rvw_ttl?ie=UTF8&ASIN=B074GZ3S4P

Shipping

This product includes free shipping to all US addresses.


Delivery

Orders placed now will arrive in 6-9 business days. Tracking information will be automatically provided as soon as your order ships.


View our full shipping policy here.

Returns

This product can be returned within 30 days of delivery for a full refund. Please visit our returns center to begin a return.

View our full returns policy here.

Top Amazon Reviews


5.0 out of 5 stars
By Joseph Damon L. Powers - Reviewed in the United States on October 16, 2017
Nice bright bulbs and easy install
These bulbs work great in my 2008 Toyota Tacoma. After installing them I properly aimed them so they wouldn't blind oncoming drivers. They work well in my stock Tacoma Headlights and have a decently clean cutoff. We'll have to see how well they hold up over time. Edit: Tacoma Owners! Don't forget to put them in correctly. If yours are spotty, it's because the bulb upside down. The Auxbeam logo on both sides should face the drivers side. Update: 2 years later and these bulbs are working great! Haven’t had any issues at all with them. I highly recommend these bulbs.

5.0 out of 5 stars
By FlyNavy - Reviewed in the United States on February 11, 2018
Longer than OEM requiring at least 4 cm space behind the fixture.
These were more difficult to install than I assumed; but, in the end, proved worth the extra effort in a 2nd generation 2006 Toyota Tacoma. These replaced halogen lamps. Because these LED lamps require more room for cooling fins, they are longer and require more space to line up and insert. I was forced to remove the battery on one side and windshield washer reservoir on the other. During that effort, I was questioning whether it was worth the effort. In the end, it was. These are brighter. Note: When reading the instructions, it is not clear...and this is only of interest someone while performing an installation...that the black plastic collar twists off (and must be clipped in place) to allow for the rubber weather seal...and only THEN insert the LED lamp.

1.0 out of 5 stars
By Mildred A. - Reviewed in the United States on July 10, 2018
Don't waste your time.
If your vehicle does not have a factory fog lamp, this will work. BUT if your vehicle is equipped with a factory fog lamps this will disable your fog lamp function and the low beam and high beam does not differ very much so drivers will be flashing their light at you or they'll be flipping you, because the beam is not focused to the road. The tech support suggested that I buy their wire that is supposed to correct the led light, but it doesn't.

2.0 out of 5 stars
By Jerry F - Reviewed in the United States on August 7, 2019
Inadequate beam focus and brightness
I really wanted to like these Auxbeam LED NF-S1 H4 bulbs, but alas they didn't perform as well as the OEM halogen bulbs on my 2004 Toyota Tacoma. They were also a bit difficult to install using the OEM rubber headlight seals but after working at it for about a half hour I did get them done. There was some cutoff for the low beams but still quite a bit of light artifacts all over up higher and the majority of the light from the high beams didn't extend far enough down the road, just a bit farther than the low beams. Over all after installing and testing on a pitch black unlighted rural road they just didn't perform as well as the good ol' stock halogen bulbs. Sure the halogens are yellowish, but it's not all about modern bright white light. I reinstalled the OEM halogens and drove to the same road I tested these LEDs on and confirmed the OEMs really did a better job on my Tacoma. Maybe these would work better in a different headlight reflector, but not in my Tacoma reflector.

5.0 out of 5 stars
By Ben's Reviews - Reviewed in the United States on February 5, 2018
New S1 model leaps and bounds better than old
Absolutely fantastic. Older models of the Auxbeam LED headlight bulbs did not perform anywhere near this well. They were bright but the pattern was awful. These S1's are phenomenal at this price point. I have the H4 bulbs in my snowmobile and the pattern is nice and tight. I will finally be ordering some for my truck. They light up the trail much better than the stock xenons, are a nice color and do not blind oncoming traffic. Can't say enough how impressed I am. Pattern at 20 feet is almost identical to stock bulbs but brighter. Update: Ran them the rest of the winter and still in love with them. Cannot be beat at this kind of pricepoint.

4.0 out of 5 stars
By Manuel - Reviewed in the United States on February 5, 2020
Works well for the price. Be careful about bulb orientation!
These bulbs work fantastic on H4 headlights. However, out of the box, the bulbs had the base installed upside down, so the little cutoff bowl pointed down instead of up. This made for a weird beam pattern that was poorly focused and was extremely blinding. Fortunately, the base can be twisted off and installed the correct way with ease with no tools. After flipping the base to its proper position, the low beams work great. Unfortunately, the left bulb is twisted a tiny bit because one of the pins that holds the base is deformed so it doesn't twist on all the way, because of this, the left beam is a bit odd and is higher than it should be. Despite this, the bulbs provide a good beam. The only real downside is that high beams are completely useless. The beam is not focused at all and doesn't illuminate very far. The color is fantastic; a mostly white light with a very, very slight hint of blue. They look great, and still illuminate properly, whereas cheaper bulbs have too much blue, so they look dim. Heat output-dissipation seems to be excellent, despite the lack of a fan. After about 10 minutes of run time, the heatsink was just a bit warm, whereas other LEDs i have tried get very hot after just a few minutes. Overall I am very satisfied, and I recommend this upgrade for any car. Light is far more pleasant, and despite the bad high-beams, these bulbs still perform better than halogens.

5.0 out of 5 stars
By Ydoc - Reviewed in the United States on January 28, 2020
Best LEDs for less than $35
The more I use these the better I like them. These are bright and very white (no blue or purple tint) making Road signs reflect very good using these LEDs, much farther away than any halogens. The light has a good spread and shows the road good on dim. Brights are good just not great. I returned Auxito LEDs which were terrible. The end of the bulbs rest against rubber dust boot. Will have to see if the heat melts the rubber boot. The following instructions are for a 2006-2014 Honda Ridgeline. 1. Remove the wiring plug from the current bulb. 2. Grasp both sides of the rubber boot and pull toward the rear of the vehicle to remove. 3. Press in and up to remove the spring clip toward the rear of the vehicle. 4. Pull the old bulb out. 5. Remove the plastic collar from the new LED and place into the light socket paying close attention to the correct orientation. 6. Install the spring clip on making sure the end of the spring clip is secured in the detent. 7. Install the rubber boot on the new LED, install in the light socket and turn 45 degrees clockwise. Make sure the hood on the LED is pointing up after installing. Press on the rubber boot until it is square on the headlight housing. 8. Attach the LED to the vehicle plug. 9. Test the bulb and repeat steps 1 through 8 for the opposite side.

Recent Reviews


5.0 out of 5 stars
By Joseph Damon L. Powers - Reviewed in the United States on October 16, 2017
Nice bright bulbs and easy install
These bulbs work great in my 2008 Toyota Tacoma. After installing them I properly aimed them so they wouldn't blind oncoming drivers. They work well in my stock Tacoma Headlights and have a decently clean cutoff. We'll have to see how well they hold up over time. Edit: Tacoma Owners! Don't forget to put them in correctly. If yours are spotty, it's because the bulb upside down. The Auxbeam logo on both sides should face the drivers side. Update: 2 years later and these bulbs are working great! Haven’t had any issues at all with them. I highly recommend these bulbs.

5.0 out of 5 stars
By FlyNavy - Reviewed in the United States on February 11, 2018
Longer than OEM requiring at least 4 cm space behind the fixture.
These were more difficult to install than I assumed; but, in the end, proved worth the extra effort in a 2nd generation 2006 Toyota Tacoma. These replaced halogen lamps. Because these LED lamps require more room for cooling fins, they are longer and require more space to line up and insert. I was forced to remove the battery on one side and windshield washer reservoir on the other. During that effort, I was questioning whether it was worth the effort. In the end, it was. These are brighter. Note: When reading the instructions, it is not clear...and this is only of interest someone while performing an installation...that the black plastic collar twists off (and must be clipped in place) to allow for the rubber weather seal...and only THEN insert the LED lamp.

1.0 out of 5 stars
By Mildred A. - Reviewed in the United States on July 10, 2018
Don't waste your time.
If your vehicle does not have a factory fog lamp, this will work. BUT if your vehicle is equipped with a factory fog lamps this will disable your fog lamp function and the low beam and high beam does not differ very much so drivers will be flashing their light at you or they'll be flipping you, because the beam is not focused to the road. The tech support suggested that I buy their wire that is supposed to correct the led light, but it doesn't.

2.0 out of 5 stars
By Jerry F - Reviewed in the United States on August 7, 2019
Inadequate beam focus and brightness
I really wanted to like these Auxbeam LED NF-S1 H4 bulbs, but alas they didn't perform as well as the OEM halogen bulbs on my 2004 Toyota Tacoma. They were also a bit difficult to install using the OEM rubber headlight seals but after working at it for about a half hour I did get them done. There was some cutoff for the low beams but still quite a bit of light artifacts all over up higher and the majority of the light from the high beams didn't extend far enough down the road, just a bit farther than the low beams. Over all after installing and testing on a pitch black unlighted rural road they just didn't perform as well as the good ol' stock halogen bulbs. Sure the halogens are yellowish, but it's not all about modern bright white light. I reinstalled the OEM halogens and drove to the same road I tested these LEDs on and confirmed the OEMs really did a better job on my Tacoma. Maybe these would work better in a different headlight reflector, but not in my Tacoma reflector.

5.0 out of 5 stars
By Ben's Reviews - Reviewed in the United States on February 5, 2018
New S1 model leaps and bounds better than old
Absolutely fantastic. Older models of the Auxbeam LED headlight bulbs did not perform anywhere near this well. They were bright but the pattern was awful. These S1's are phenomenal at this price point. I have the H4 bulbs in my snowmobile and the pattern is nice and tight. I will finally be ordering some for my truck. They light up the trail much better than the stock xenons, are a nice color and do not blind oncoming traffic. Can't say enough how impressed I am. Pattern at 20 feet is almost identical to stock bulbs but brighter. Update: Ran them the rest of the winter and still in love with them. Cannot be beat at this kind of pricepoint.

4.0 out of 5 stars
By Manuel - Reviewed in the United States on February 5, 2020
Works well for the price. Be careful about bulb orientation!
These bulbs work fantastic on H4 headlights. However, out of the box, the bulbs had the base installed upside down, so the little cutoff bowl pointed down instead of up. This made for a weird beam pattern that was poorly focused and was extremely blinding. Fortunately, the base can be twisted off and installed the correct way with ease with no tools. After flipping the base to its proper position, the low beams work great. Unfortunately, the left bulb is twisted a tiny bit because one of the pins that holds the base is deformed so it doesn't twist on all the way, because of this, the left beam is a bit odd and is higher than it should be. Despite this, the bulbs provide a good beam. The only real downside is that high beams are completely useless. The beam is not focused at all and doesn't illuminate very far. The color is fantastic; a mostly white light with a very, very slight hint of blue. They look great, and still illuminate properly, whereas cheaper bulbs have too much blue, so they look dim. Heat output-dissipation seems to be excellent, despite the lack of a fan. After about 10 minutes of run time, the heatsink was just a bit warm, whereas other LEDs i have tried get very hot after just a few minutes. Overall I am very satisfied, and I recommend this upgrade for any car. Light is far more pleasant, and despite the bad high-beams, these bulbs still perform better than halogens.

5.0 out of 5 stars
By Ydoc - Reviewed in the United States on January 28, 2020
Best LEDs for less than $35
The more I use these the better I like them. These are bright and very white (no blue or purple tint) making Road signs reflect very good using these LEDs, much farther away than any halogens. The light has a good spread and shows the road good on dim. Brights are good just not great. I returned Auxito LEDs which were terrible. The end of the bulbs rest against rubber dust boot. Will have to see if the heat melts the rubber boot. The following instructions are for a 2006-2014 Honda Ridgeline. 1. Remove the wiring plug from the current bulb. 2. Grasp both sides of the rubber boot and pull toward the rear of the vehicle to remove. 3. Press in and up to remove the spring clip toward the rear of the vehicle. 4. Pull the old bulb out. 5. Remove the plastic collar from the new LED and place into the light socket paying close attention to the correct orientation. 6. Install the spring clip on making sure the end of the spring clip is secured in the detent. 7. Install the rubber boot on the new LED, install in the light socket and turn 45 degrees clockwise. Make sure the hood on the LED is pointing up after installing. Press on the rubber boot until it is square on the headlight housing. 8. Attach the LED to the vehicle plug. 9. Test the bulb and repeat steps 1 through 8 for the opposite side.